mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-07-22 10:59:43 +09:00
2be296538e
This converts the following to Kconfig: CONFIG_ENV_IS_IN_MMC CONFIG_ENV_IS_IN_NAND CONFIG_ENV_IS_IN_UBI CONFIG_ENV_IS_NOWHERE In fact this already exists for sunxi as a 'choice' config. However not all the choices are available in Kconfig yet so we cannot use that. It would lead to more than one option being set. In addition, one purpose of this series is to allow the environment to be stored in more than one place. So the existing choice is converted to a normal config allowing each option to be set independently. There are not many opportunities for Kconfig updates to reduce the size of this patch. This was tested with ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC And then manual updates. This is because for CHAIN_OF_TRUST boards they can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic now. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
157 lines
4.6 KiB
C
157 lines
4.6 KiB
C
/*
|
|
* Copyright (c) 2012 Michael Walle
|
|
* Michael Walle <michael@walle.cc>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef _CONFIG_LSXL_H
|
|
#define _CONFIG_LSXL_H
|
|
|
|
/*
|
|
* Version number information
|
|
*/
|
|
#if defined(CONFIG_LSCHLV2)
|
|
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg
|
|
#define CONFIG_MACH_TYPE 3006
|
|
#define CONFIG_SYS_TCLK 166666667 /* 166 MHz */
|
|
#elif defined(CONFIG_LSXHL)
|
|
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg
|
|
#define CONFIG_MACH_TYPE 2663
|
|
/* CONFIG_SYS_TCLK is 200000000 by default */
|
|
#else
|
|
#error "unknown board"
|
|
#endif
|
|
|
|
/*
|
|
* General configuration options
|
|
*/
|
|
#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
|
|
#define CONFIG_KW88F6281 /* SOC Name */
|
|
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
|
|
#define CONFIG_MISC_INIT_R
|
|
#define CONFIG_SHOW_BOOT_PROGRESS
|
|
|
|
#define CONFIG_KIRKWOOD_GPIO
|
|
|
|
/*
|
|
* Commands configuration
|
|
*/
|
|
|
|
/*
|
|
* mv-common.h should be defined after CMD configs since it used them
|
|
* to enable certain macros
|
|
*/
|
|
#include "mv-common.h"
|
|
|
|
/* loading initramfs images without uimage header */
|
|
#define CONFIG_SUPPORT_RAW_INITRD
|
|
|
|
/* ST M25P40 */
|
|
#undef CONFIG_ENV_SPI_MAX_HZ
|
|
#define CONFIG_ENV_SPI_MAX_HZ 25000000
|
|
#undef CONFIG_SF_DEFAULT_SPEED
|
|
#define CONFIG_SF_DEFAULT_SPEED 25000000
|
|
|
|
/*
|
|
* Environment variables configurations
|
|
*/
|
|
#ifdef CONFIG_SPI_FLASH
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 8
|
|
#define CONFIG_ENV_IS_IN_SPI_FLASH 1
|
|
#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K */
|
|
#endif
|
|
|
|
#define CONFIG_ENV_SIZE 0x10000 /* 64k */
|
|
#define CONFIG_ENV_OFFSET 0x70000 /* env starts here */
|
|
|
|
/*
|
|
* Default environment variables
|
|
*/
|
|
#define CONFIG_LOADADDR 0x00800000
|
|
#define CONFIG_BOOTCOMMAND "run bootcmd_${bootsource}"
|
|
#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/sda2"
|
|
|
|
#if defined(CONFIG_LSXHL)
|
|
#define CONFIG_FDTFILE "kirkwood-lsxhl.dtb"
|
|
#elif defined(CONFIG_LSCHLV2)
|
|
#define CONFIG_FDTFILE "kirkwood-lschlv2.dtb"
|
|
#else
|
|
#error "Unsupported board"
|
|
#endif
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"bootsource=legacy\0" \
|
|
"hdpart=0:1\0" \
|
|
"kernel_addr=0x00800000\0" \
|
|
"ramdisk_addr=0x01000000\0" \
|
|
"fdt_addr=0x00ff0000\0" \
|
|
"bootcmd_legacy=ide reset " \
|
|
"&& load ide ${hdpart} ${kernel_addr} /uImage.buffalo " \
|
|
"&& load ide ${hdpart} ${ramdisk_addr} /initrd.buffalo "\
|
|
"&& bootm ${kernel_addr} ${ramdisk_addr}\0" \
|
|
"bootcmd_net=bootp ${kernel_addr} vmlinuz " \
|
|
"&& tftpboot ${ramdisk_addr} initrd.img " \
|
|
"&& setenv ramdisk_len ${filesize} " \
|
|
"&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " " \
|
|
"&& bootz ${kernel_addr} " \
|
|
"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \
|
|
"bootcmd_hdd=ide reset " \
|
|
"&& load ide ${hdpart} ${kernel_addr} /vmlinuz " \
|
|
"&& load ide ${hdpart} ${ramdisk_addr} /initrd.img " \
|
|
"&& setenv ramdisk_len ${filesize} " \
|
|
"&& load ide ${hdpart} ${fdt_addr} /dtb " \
|
|
"&& bootz ${kernel_addr} " \
|
|
"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \
|
|
"bootcmd_usb=usb start " \
|
|
"&& load usb 0:1 ${kernel_addr} /vmlinuz " \
|
|
"&& load usb 0:1 ${ramdisk_addr} /initrd.img " \
|
|
"&& setenv ramdisk_len ${filesize} " \
|
|
"&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " " \
|
|
"&& bootz ${kernel_addr} " \
|
|
"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \
|
|
"bootcmd_rescue=run config_nc_dhcp; run nc\0" \
|
|
"eraseenv=sf probe 0 " \
|
|
"&& sf erase " __stringify(CONFIG_ENV_OFFSET) \
|
|
" +" __stringify(CONFIG_ENV_SIZE) "\0" \
|
|
"config_nc_dhcp=setenv autoload_old ${autoload}; " \
|
|
"setenv autoload no " \
|
|
"&& bootp " \
|
|
"&& setenv ncip " \
|
|
"&& setenv autoload ${autoload_old}; " \
|
|
"setenv autoload_old\0" \
|
|
"standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \
|
|
"setenv ncip; setenv gatewayip; setenv ethact; " \
|
|
"setenv bootfile; setenv dnsip; " \
|
|
"setenv bootsource legacy; run ser\0" \
|
|
"restore_env=run standard_env; saveenv; reset\0" \
|
|
"ser=setenv stdin serial; setenv stdout serial; " \
|
|
"setenv stderr serial\0" \
|
|
"nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0" \
|
|
"stdin=serial\0" \
|
|
"stdout=serial\0" \
|
|
"stderr=serial\0"
|
|
|
|
/*
|
|
* Ethernet Driver configuration
|
|
*/
|
|
#ifdef CONFIG_CMD_NET
|
|
#define CONFIG_MVGBE_PORTS {0, 1} /* enable port 1 only */
|
|
#define CONFIG_PHY_BASE_ADR 7
|
|
#undef CONFIG_RESET_PHY_R
|
|
#endif /* CONFIG_CMD_NET */
|
|
|
|
#ifdef CONFIG_IDE
|
|
#undef CONFIG_IDE_LED
|
|
#undef CONFIG_SYS_IDE_MAXBUS
|
|
#define CONFIG_SYS_IDE_MAXBUS 1
|
|
#undef CONFIG_SYS_IDE_MAXDEVICE
|
|
#define CONFIG_SYS_IDE_MAXDEVICE 1
|
|
#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
|
|
#define CONFIG_SYS_64BIT_LBA
|
|
#endif
|
|
|
|
#endif /* _CONFIG_LSXL_H */
|