u-boot-brain/include/configs/am335x_sl50.h
Simon Glass 2be296538e Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig
This converts the following to Kconfig:
   CONFIG_ENV_IS_IN_MMC
   CONFIG_ENV_IS_IN_NAND
   CONFIG_ENV_IS_IN_UBI
   CONFIG_ENV_IS_NOWHERE

In fact this already exists for sunxi as a 'choice' config. However not
all the choices are available in Kconfig yet so we cannot use that. It
would lead to more than one option being set.

In addition, one purpose of this series is to allow the environment to be
stored in more than one place. So the existing choice is converted to a
normal config allowing each option to be set independently.

There are not many opportunities for Kconfig updates to reduce the size of
this patch. This was tested with

   ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC

And then manual updates.  This is because for CHAIN_OF_TRUST boards they
can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
now.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-07-25 21:08:01 -04:00

108 lines
2.6 KiB
C

/*
* am335x_sl50.h
*
* Copyright (C) 2015 Toby Churchill Ltd - http://www.toby-churchill.com/
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_AM335X_EVM_H
#define __CONFIG_AM335X_EVM_H
#include <configs/ti_am335x_common.h>
#ifndef CONFIG_SPL_BUILD
# define CONFIG_TIMESTAMP
#endif
#define CONFIG_SYS_BOOTM_LEN (16 << 20)
/*#define CONFIG_MACH_TYPE 3589 Until the next sync */
/* Clock Defines */
#define V_OSCK 24000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK)
/* Always 128 KiB env size */
#define CONFIG_ENV_SIZE (128 << 10)
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#ifndef CONFIG_SPL_BUILD
#include <config_distro_defaults.h>
#define MEM_LAYOUT_ENV_SETTINGS \
"scriptaddr=0x80000000\0" \
"pxefile_addr_r=0x80100000\0" \
"kernel_addr_r=0x82000000\0" \
"fdt_addr_r=0x88000000\0" \
"ramdisk_addr_r=0x88080000\0" \
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \
func(MMC, mmc, 1)
#define AM335XX_BOARD_FDTFILE \
"fdtfile=am335x-sl50.dtb\0" \
#include <config_distro_bootcmd.h>
#define CONFIG_EXTRA_ENV_SETTINGS \
AM335XX_BOARD_FDTFILE \
MEM_LAYOUT_ENV_SETTINGS \
BOOTENV
#endif
/* NS16550 Configuration */
#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */
#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */
#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */
#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
#define CONFIG_ENV_EEPROM_IS_ON_I2C
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
/* PMIC support */
#define CONFIG_POWER_TPS65217
#define CONFIG_POWER_TPS65910
/* SPL */
/* Bootcount using the RTC block */
#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_BOOTCOUNT_AM33XX
#define CONFIG_SYS_BOOTCOUNT_BE
#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds"
#ifndef CONFIG_SPL_USBETH_SUPPORT
#define CONFIG_FASTBOOT_FLASH_MMC_DEV 1
#endif
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)
/* Remove other SPL modes. */
/* disable host part of MUSB in SPL */
#undef CONFIG_MUSB_HOST
/* disable EFI partitions and partition UUID support */
#endif
#if defined(CONFIG_EMMC_BOOT)
#define CONFIG_SYS_MMC_ENV_DEV 1
#define CONFIG_SYS_MMC_ENV_PART 2
#define CONFIG_ENV_OFFSET 0x0
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
#endif
/* Network. */
#define CONFIG_PHY_GIGE
#define CONFIG_PHYLIB
#define CONFIG_PHY_SMSC
#endif /* ! __CONFIG_AM335X_SL50_H */