u-boot-brain/include/configs/duovero.h
Nikita Kiryanov 181bd9dc61 kconfig: add config option for shell prompt
Add option to set shell prompt string from menuconfig and migrate
boards globally.

The migration is done as follows:
- Boards that explicitly and unconditionally set CONFIG_SYS_PROMPT had the
  entry moved to their defconfig files.
- Boards that defined some kind of #ifdef logic which selects the
  CONFIG_SYS_PROMPT (for example qemu-mips) got an #undef CONFIG_SYS_PROMPT
  right before the #ifdef logic and were left alone.
- This change forces CONFIG_SYS_PROMPT to be a per board decision, and thus
  CONFIG_SYS_PROMPT was removed from all <soc>_common.h and <arch>_common.h
  files. This results in a streamlined default value across platforms, and
  includes the following files: spear-common, sunxi-common, mv-common,
  ti_armv7_common, tegra-common, at91-sama5_common, and zynq-common.
- Boards that relied on <arch/soc>_common.h values of CONFIG_SYS_PROMPT were
  not updated in their respective defconfig files under the assumption that
  since they did not explicitly define a value, they're fine with whatever
  the default is.
- On the other hand, boards that relied on a value defined in some
  <boards>_common.h file such as woodburn_common, rpi-common,
  bur_am335x_common, ls2085a_common, siemens_am33x_common, and
  omap3_evm_common, had their values moved to the respective defconfig files.
- The define V_PROMPT was removed, since it is not used anywhere except for
  assigning a value for CONFIG_SYS_PROMPT.

Cc: Tom Rini <trini@konsulko.com>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
[trini: Add spring, sniper, smartweb to conversion]
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-08-13 07:19:33 -04:00

59 lines
1.3 KiB
C

/*
* (C) Copyright: 2013
* Gumstix, Inc - http://www.gumstix.com
* Maintainer: Ash Charles <ash@gumstix.com>
*
* Configuration settings for the Gumstix DuoVero board.
* See omap4_common.h for OMAP4 common part
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_DUOVERO_H
#define __CONFIG_DUOVERO_H
/*
* High Level Configuration Options
*/
#define CONFIG_DUOVERO
#define MACH_TYPE_OMAP4_DUOVERO 4097 /* Until the next sync */
#define CONFIG_MACH_TYPE MACH_TYPE_OMAP4_DUOVERO
#include <configs/ti_omap4_common.h>
#undef CONFIG_SPL_OS_BOOT
#undef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
/* USB UHH support options */
#define CONFIG_CMD_USB
#define CONFIG_USB_HOST
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_OMAP
#define CONFIG_USB_STORAGE
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 1
#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 62
#define CONFIG_SYS_ENABLE_PADS_ALL
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_SMC911X
#define CONFIG_SMC911X_32_BIT
#define CONFIG_SMC911X_BASE 0x2C000000
/* GPIO */
#define CONFIG_CMD_GPIO
/* ENV related config options */
#define CONFIG_ENV_IS_NOWHERE
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#endif /* __CONFIG_DUOVERO_H */