mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-09-09 06:13:21 +09:00
![Hugo Villeneuve](/assets/img/avatar_default.png)
ARM DaVinci: Remove extern phy_t declaration by moving code to proper place. Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
307 lines
8.1 KiB
C
307 lines
8.1 KiB
C
/*
|
|
* Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
|
|
*
|
|
* Copyright (C) 2008 Lyrtech <www.lyrtech.com>
|
|
* Copyright (C) 2008 Philip Balister, OpenSDR <philip@opensdr.com>
|
|
*
|
|
* Parts are shamelessly stolen from various TI sources, original copyright
|
|
* follows:
|
|
*
|
|
* Copyright (C) 2004 Texas Instruments.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <i2c.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/emac_defs.h>
|
|
|
|
#define DAVINCI_A3CR (0x01E00014) /* EMIF-A CS3 config register. */
|
|
#define DAVINCI_A3CR_VAL (0x3FFFFFFD) /* EMIF-A CS3 value for FPGA. */
|
|
|
|
#define INTEGRITY_SYSCFG_OFFSET 0x7E8
|
|
#define INTEGRITY_CHECKWORD_OFFSET 0x7F8
|
|
#define INTEGRITY_CHECKWORD_VALUE 0x10ADBEEF
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
extern void timer_init(void);
|
|
extern int eth_hw_init(void);
|
|
|
|
|
|
/* Works on Always On power domain only (no PD argument) */
|
|
void lpsc_on(unsigned int id)
|
|
{
|
|
dv_reg_p mdstat, mdctl;
|
|
|
|
if (id >= DAVINCI_LPSC_GEM)
|
|
return; /* Don't work on DSP Power Domain */
|
|
|
|
mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4));
|
|
mdctl = REG_P(PSC_MDCTL_BASE + (id * 4));
|
|
|
|
while (REG(PSC_PTSTAT) & 0x01);
|
|
|
|
if ((*mdstat & 0x1f) == 0x03)
|
|
return; /* Already on and enabled */
|
|
|
|
*mdctl |= 0x03;
|
|
|
|
/* Special treatment for some modules as for sprue14 p.7.4.2 */
|
|
switch (id) {
|
|
case DAVINCI_LPSC_VPSSSLV:
|
|
case DAVINCI_LPSC_EMAC:
|
|
case DAVINCI_LPSC_EMAC_WRAPPER:
|
|
case DAVINCI_LPSC_MDIO:
|
|
case DAVINCI_LPSC_USB:
|
|
case DAVINCI_LPSC_ATA:
|
|
case DAVINCI_LPSC_VLYNQ:
|
|
case DAVINCI_LPSC_UHPI:
|
|
case DAVINCI_LPSC_DDR_EMIF:
|
|
case DAVINCI_LPSC_AEMIF:
|
|
case DAVINCI_LPSC_MMC_SD:
|
|
case DAVINCI_LPSC_MEMSTICK:
|
|
case DAVINCI_LPSC_McBSP:
|
|
case DAVINCI_LPSC_GPIO:
|
|
*mdctl |= 0x200;
|
|
break;
|
|
}
|
|
|
|
REG(PSC_PTCMD) = 0x01;
|
|
|
|
while (REG(PSC_PTSTAT) & 0x03);
|
|
while ((*mdstat & 0x1f) != 0x03); /* Probably an overkill... */
|
|
}
|
|
|
|
#if !defined(CFG_USE_DSPLINK)
|
|
void dsp_on(void)
|
|
{
|
|
int i;
|
|
|
|
if (REG(PSC_PDSTAT1) & 0x1f)
|
|
return; /* Already on */
|
|
|
|
REG(PSC_GBLCTL) |= 0x01;
|
|
REG(PSC_PDCTL1) |= 0x01;
|
|
REG(PSC_PDCTL1) &= ~0x100;
|
|
REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03;
|
|
REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff;
|
|
REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03;
|
|
REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff;
|
|
REG(PSC_PTCMD) = 0x02;
|
|
|
|
for (i = 0; i < 100; i++) {
|
|
if (REG(PSC_EPCPR) & 0x02)
|
|
break;
|
|
}
|
|
|
|
REG(PSC_CHP_SHRTSW) = 0x01;
|
|
REG(PSC_PDCTL1) |= 0x100;
|
|
REG(PSC_EPCCR) = 0x02;
|
|
|
|
for (i = 0; i < 100; i++) {
|
|
if (!(REG(PSC_PTSTAT) & 0x02))
|
|
break;
|
|
}
|
|
|
|
REG(PSC_GBLCTL) &= ~0x1f;
|
|
}
|
|
#endif /* CFG_USE_DSPLINK */
|
|
|
|
int board_init(void)
|
|
{
|
|
/* arch number of the board */
|
|
gd->bd->bi_arch_number = MACH_TYPE_SFFSDR;
|
|
|
|
/* address of boot parameters */
|
|
gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
|
|
|
|
/* Workaround for TMS320DM6446 errata 1.3.22 */
|
|
REG(PSC_SILVER_BULLET) = 0;
|
|
|
|
/* Power on required peripherals */
|
|
lpsc_on(DAVINCI_LPSC_EMAC);
|
|
lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER);
|
|
lpsc_on(DAVINCI_LPSC_MDIO);
|
|
lpsc_on(DAVINCI_LPSC_I2C);
|
|
lpsc_on(DAVINCI_LPSC_UART0);
|
|
lpsc_on(DAVINCI_LPSC_TIMER1);
|
|
lpsc_on(DAVINCI_LPSC_GPIO);
|
|
|
|
#if !defined(CFG_USE_DSPLINK)
|
|
/* Powerup the DSP */
|
|
dsp_on();
|
|
#endif /* CFG_USE_DSPLINK */
|
|
|
|
/* Bringup UART0 out of reset */
|
|
REG(UART0_PWREMU_MGMT) = 0x0000e003;
|
|
|
|
/* Enable GIO3.3V cells used for EMAC */
|
|
REG(VDD3P3V_PWDN) = 0;
|
|
|
|
/* Enable UART0 MUX lines */
|
|
REG(PINMUX1) |= 1;
|
|
|
|
/* Enable EMAC and AEMIF pins */
|
|
REG(PINMUX0) = 0x80000c1f;
|
|
|
|
/* Enable I2C pin Mux */
|
|
REG(PINMUX1) |= (1 << 7);
|
|
|
|
/* Set the Bus Priority Register to appropriate value */
|
|
REG(VBPR) = 0x20;
|
|
|
|
timer_init();
|
|
|
|
return(0);
|
|
}
|
|
|
|
/* Read ethernet MAC address from Integrity data structure inside EEPROM. */
|
|
int read_mac_address(uint8_t *buf)
|
|
{
|
|
u_int32_t value, mac[2], address;
|
|
|
|
/* Read Integrity data structure checkword. */
|
|
if (i2c_read(CFG_I2C_EEPROM_ADDR, INTEGRITY_CHECKWORD_OFFSET,
|
|
CFG_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
|
|
goto err;
|
|
if (value != INTEGRITY_CHECKWORD_VALUE)
|
|
return 1;
|
|
|
|
/* Read SYSCFG structure offset. */
|
|
if (i2c_read(CFG_I2C_EEPROM_ADDR, INTEGRITY_SYSCFG_OFFSET,
|
|
CFG_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
|
|
goto err;
|
|
address = 0x800 + (int) value; /* Address of SYSCFG structure. */
|
|
|
|
/* Read NET CONFIG structure offset. */
|
|
if (i2c_read(CFG_I2C_EEPROM_ADDR, address,
|
|
CFG_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
|
|
goto err;
|
|
address = 0x800 + (int) value; /* Address of NET CONFIG structure. */
|
|
address += 12; /* Address of NET INTERFACE CONFIG structure. */
|
|
|
|
/* Read NET INTERFACE CONFIG 2 structure offset. */
|
|
if (i2c_read(CFG_I2C_EEPROM_ADDR, address,
|
|
CFG_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
|
|
goto err;
|
|
address = 0x800 + 16 + (int) value; /* Address of NET INTERFACE
|
|
* CONFIG 2 structure. */
|
|
|
|
/* Read MAC address. */
|
|
if (i2c_read(CFG_I2C_EEPROM_ADDR, address,
|
|
CFG_I2C_EEPROM_ADDR_LEN, (uint8_t *) &mac[0], 8))
|
|
goto err;
|
|
|
|
buf[0] = mac[0] >> 24;
|
|
buf[1] = mac[0] >> 16;
|
|
buf[2] = mac[0] >> 8;
|
|
buf[3] = mac[0];
|
|
buf[4] = mac[1] >> 24;
|
|
buf[5] = mac[1] >> 16;
|
|
|
|
return 0;
|
|
|
|
err:
|
|
printf("Read from EEPROM @ 0x%02x failed\n", CFG_I2C_EEPROM_ADDR);
|
|
return 1;
|
|
}
|
|
|
|
/* Platform dependent initialisation. */
|
|
int misc_init_r(void)
|
|
{
|
|
int i;
|
|
u_int8_t i2cbuf;
|
|
u_int8_t env_enetaddr[6], eeprom_enetaddr[6];
|
|
char *tmp = getenv("ethaddr");
|
|
char *end;
|
|
int clk;
|
|
|
|
/* EMIF-A CS3 configuration for FPGA. */
|
|
REG(DAVINCI_A3CR) = DAVINCI_A3CR_VAL;
|
|
|
|
clk = ((REG(PLL2_PLLM) + 1) * 27) / ((REG(PLL2_DIV2) & 0x1f) + 1);
|
|
|
|
printf("ARM Clock: %dMHz\n", ((REG(PLL1_PLLM) + 1) * 27) / 2);
|
|
printf("DDR Clock: %dMHz\n", (clk / 2));
|
|
|
|
/* Configure I2C switch (PCA9543) to enable channel 0. */
|
|
i2cbuf = CFG_I2C_PCA9543_ENABLE_CH0;
|
|
if (i2c_write(CFG_I2C_PCA9543_ADDR, 0,
|
|
CFG_I2C_PCA9543_ADDR_LEN, &i2cbuf, 1)) {
|
|
printf("Write to MUX @ 0x%02x failed\n", CFG_I2C_PCA9543_ADDR);
|
|
return 1;
|
|
}
|
|
|
|
/* Read Ethernet MAC address from the U-Boot environment. */
|
|
for (i = 0; i < 6; i++) {
|
|
env_enetaddr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0;
|
|
if (tmp)
|
|
tmp = (*end) ? end+1 : end;
|
|
}
|
|
|
|
/* Read Ethernet MAC address from EEPROM. */
|
|
if (read_mac_address(eeprom_enetaddr) == 0) {
|
|
if (memcmp(env_enetaddr, "\0\0\0\0\0\0", 6) != 0 &&
|
|
memcmp(env_enetaddr, eeprom_enetaddr, 6) != 0) {
|
|
printf("\nWarning: MAC addresses don't match:\n");
|
|
printf("\tHW MAC address: "
|
|
"%02X:%02X:%02X:%02X:%02X:%02X\n",
|
|
eeprom_enetaddr[0], eeprom_enetaddr[1],
|
|
eeprom_enetaddr[2], eeprom_enetaddr[3],
|
|
eeprom_enetaddr[4], eeprom_enetaddr[5]);
|
|
printf("\t\"ethaddr\" value: "
|
|
"%02X:%02X:%02X:%02X:%02X:%02X\n",
|
|
env_enetaddr[0], env_enetaddr[1],
|
|
env_enetaddr[2], env_enetaddr[3],
|
|
env_enetaddr[4], env_enetaddr[5]) ;
|
|
debug("### Set MAC addr from environment\n");
|
|
memcpy(eeprom_enetaddr, env_enetaddr, 6);
|
|
}
|
|
if (!tmp) {
|
|
char ethaddr[20];
|
|
|
|
sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X",
|
|
eeprom_enetaddr[0], eeprom_enetaddr[1],
|
|
eeprom_enetaddr[2], eeprom_enetaddr[3],
|
|
eeprom_enetaddr[4], eeprom_enetaddr[5]) ;
|
|
debug("### Set environment from HW MAC addr = \"%s\"\n",
|
|
ethaddr);
|
|
setenv("ethaddr", ethaddr);
|
|
}
|
|
}
|
|
|
|
if (!eth_hw_init())
|
|
printf("Ethernet init failed\n");
|
|
|
|
/* On this platform, U-Boot is copied in RAM by the UBL,
|
|
* so we are always in the relocated state. */
|
|
gd->flags |= GD_FLG_RELOC;
|
|
|
|
return(0);
|
|
}
|
|
|
|
int dram_init(void)
|
|
{
|
|
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
|
|
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
|
|
|
|
return(0);
|
|
}
|