u-boot-brain/board/davinci/dm355evm/config.mk
David Brownell 28b00324be dm355 evm support
Initial U-Boot support for the DaVinci DM355 EVM.  This is a board
from Spectrum Digital.  Board docs include schematic and firmware
for its microcontroller:

  http://c6000.spectrumdigital.com/evmdm355/revd/

Most of the DM355 chip is fully documented by TI, the most notable
exception being the MPEG/JPEG coprocessor (programmable using codecs
available at no cost from TI), which is omitted from its DM335 sibling:

  http://focus.ti.com/docs/prod/folders/print/tms320dm355.html

This version can boot from the on-board DM9000 Ethernet chip, after
being loaded (from NAND, MMC/SD, or UART).  In the near future, NAND
and USB support could be added ... NAND support is being held back
until the support for the 4-bit ECC hardware is ready.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-06-12 20:39:51 +02:00

12 lines
310 B
Makefile

#
# Spectrum Digital DM355 EVM board
# dm355evm board has 1 bank of 128 MB DDR RAM
# Physical Address: 8000'0000 to 8800'0000
#
# Linux Kernel is expected to be at 8000'8000, entry 8000'8000
# (mem base + reserved)
#
#Provide at least 16MB spacing between us and the Linux Kernel image
TEXT_BASE = 0x81080000