mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 00:48:52 +09:00
![Wolfgang Denk](/assets/img/avatar_default.png)
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
624 lines
14 KiB
C
624 lines
14 KiB
C
/*
|
|
* (C) Copyright 2000-2002
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
* (C) Copyright 2002
|
|
* Daniel Engström, Omicron Ceti AB
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*
|
|
********************************************************************
|
|
*
|
|
* Lots of code copied from:
|
|
*
|
|
* m8xx_pcmcia.c - Linux PCMCIA socket driver for the mpc8xx series.
|
|
* (C) 1999-2000 Magnus Damm <damm@bitsmart.com>
|
|
*
|
|
* "The ExCA standard specifies that socket controllers should provide
|
|
* two IO and five memory windows per socket, which can be independently
|
|
* configured and positioned in the host address space and mapped to
|
|
* arbitrary segments of card address space. " - David A Hinds. 1999
|
|
*
|
|
* This controller does _not_ meet the ExCA standard.
|
|
*
|
|
* m8xx pcmcia controller brief info:
|
|
* + 8 windows (attrib, mem, i/o)
|
|
* + up to two slots (SLOT_A and SLOT_B)
|
|
* + inputpins, outputpins, event and mask registers.
|
|
* - no offset register. sigh.
|
|
*
|
|
* Because of the lacking offset register we must map the whole card.
|
|
* We assign each memory window PCMCIA_MEM_WIN_SIZE address space.
|
|
* Make sure there is (PCMCIA_MEM_WIN_SIZE * PCMCIA_MEM_WIN_NO
|
|
* * PCMCIA_SOCKETS_NO) bytes at PCMCIA_MEM_WIN_BASE.
|
|
* The i/o windows are dynamically allocated at PCMCIA_IO_WIN_BASE.
|
|
* They are maximum 64KByte each...
|
|
*/
|
|
|
|
|
|
#undef DEBUG /**/
|
|
|
|
/*
|
|
* PCMCIA support
|
|
*/
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <config.h>
|
|
#include <pci.h>
|
|
#include <asm/io.h>
|
|
|
|
#include <pcmcia.h>
|
|
|
|
#if defined(CONFIG_CMD_PCMCIA)
|
|
|
|
int pcmcia_on(int ide_base_bus);
|
|
|
|
static int hardware_disable(int slot);
|
|
static int hardware_enable(int slot);
|
|
static int voltage_set(int slot, int vcc, int vpp);
|
|
static void print_funcid(int func);
|
|
static void print_fixed(volatile char *p);
|
|
static int identify(volatile char *p);
|
|
static int check_ide_device(int slot, int ide_base_bus);
|
|
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
|
|
const char *indent = "\t ";
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
|
|
static struct pci_device_id supported[] = {
|
|
{ PCI_VENDOR_ID_TI, 0xac50 }, /* Ti PCI1410A */
|
|
{ PCI_VENDOR_ID_TI, 0xac56 }, /* Ti PCI1510 */
|
|
{ }
|
|
};
|
|
|
|
static pci_dev_t devbusfn;
|
|
static u32 socket_base;
|
|
static u32 pcmcia_cis_ptr;
|
|
|
|
int pcmcia_on(int ide_base_bus)
|
|
{
|
|
u16 dev_id;
|
|
u32 socket_status;
|
|
int slot = 0;
|
|
int cis_len;
|
|
u16 io_base;
|
|
u16 io_len;
|
|
|
|
/*
|
|
* Find the CardBus PCI device(s).
|
|
*/
|
|
if ((devbusfn = pci_find_devices(supported, 0)) < 0) {
|
|
printf("Ti CardBus: not found\n");
|
|
return 1;
|
|
}
|
|
|
|
pci_read_config_word(devbusfn, PCI_DEVICE_ID, &dev_id);
|
|
|
|
if (dev_id == 0xac56) {
|
|
debug("Enable PCMCIA Ti PCI1510\n");
|
|
} else {
|
|
debug("Enable PCMCIA Ti PCI1410A\n");
|
|
}
|
|
|
|
pcmcia_cis_ptr = CONFIG_SYS_PCMCIA_CIS_WIN;
|
|
cis_len = CONFIG_SYS_PCMCIA_CIS_WIN_SIZE;
|
|
|
|
io_base = CONFIG_SYS_PCMCIA_IO_WIN;
|
|
io_len = CONFIG_SYS_PCMCIA_IO_WIN_SIZE;
|
|
|
|
/*
|
|
* Setup the PCI device.
|
|
*/
|
|
pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, &socket_base);
|
|
socket_base &= ~0xf;
|
|
|
|
socket_status = readl(socket_base+8);
|
|
if ((socket_status & 6) == 0) {
|
|
printf("Card Present: ");
|
|
|
|
switch (socket_status & 0x3c00) {
|
|
|
|
case 0x400:
|
|
printf("5V ");
|
|
break;
|
|
case 0x800:
|
|
printf("3.3V ");
|
|
break;
|
|
case 0xc00:
|
|
printf("3.3/5V ");
|
|
break;
|
|
default:
|
|
printf("unsupported Vcc ");
|
|
break;
|
|
}
|
|
switch (socket_status & 0x30) {
|
|
case 0x10:
|
|
printf("16bit PC-Card\n");
|
|
break;
|
|
case 0x20:
|
|
printf("32bit CardBus Card\n");
|
|
break;
|
|
default:
|
|
printf("8bit PC-Card\n");
|
|
break;
|
|
}
|
|
}
|
|
|
|
|
|
writeb(0x41, socket_base + 0x806); /* Enable I/O window 0 and memory window 0 */
|
|
writeb(0x0e, socket_base + 0x807); /* Reset I/O window options */
|
|
|
|
/* Careful: the linux yenta driver do not seem to reset the offset
|
|
* in the i/o windows, so leaving them non-zero is a problem */
|
|
|
|
writeb(io_base & 0xff, socket_base + 0x808); /* I/O window 0 base address */
|
|
writeb(io_base>>8, socket_base + 0x809);
|
|
writeb((io_base + io_len - 1) & 0xff, socket_base + 0x80a); /* I/O window 0 end address */
|
|
writeb((io_base + io_len - 1)>>8, socket_base + 0x80b);
|
|
writeb(0x00, socket_base + 0x836); /* I/O window 0 offset address 0x000 */
|
|
writeb(0x00, socket_base + 0x837);
|
|
|
|
|
|
writeb((pcmcia_cis_ptr&0x000ff000) >> 12,
|
|
socket_base + 0x810); /* Memory window 0 start address bits 19-12 */
|
|
writeb((pcmcia_cis_ptr&0x00f00000) >> 20,
|
|
socket_base + 0x811); /* Memory window 0 start address bits 23-20 */
|
|
writeb(((pcmcia_cis_ptr+cis_len-1) & 0x000ff000) >> 12,
|
|
socket_base + 0x812); /* Memory window 0 end address bits 19-12*/
|
|
writeb(((pcmcia_cis_ptr+cis_len-1) & 0x00f00000) >> 20,
|
|
socket_base + 0x813); /* Memory window 0 end address bits 23-20*/
|
|
writeb(0x00, socket_base + 0x814); /* Memory window 0 offset bits 19-12 */
|
|
writeb(0x40, socket_base + 0x815); /* Memory window 0 offset bits 23-20 and
|
|
* options (read/write, attribute access) */
|
|
writeb(0x00, socket_base + 0x816); /* ExCA card-detect and general control */
|
|
writeb(0x00, socket_base + 0x81e); /* ExCA global control (interrupt modes) */
|
|
|
|
writeb((pcmcia_cis_ptr & 0xff000000) >> 24,
|
|
socket_base + 0x840); /* Memory window address bits 31-24 */
|
|
|
|
|
|
/* turn off voltage */
|
|
if (voltage_set(slot, 0, 0)) {
|
|
return 1;
|
|
}
|
|
|
|
/* Enable external hardware */
|
|
if (hardware_enable(slot)) {
|
|
return 1;
|
|
}
|
|
|
|
if (check_ide_device(slot, ide_base_bus)) {
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
|
|
#if defined(CONFIG_CMD_PCMCIA)
|
|
int pcmcia_off (void)
|
|
{
|
|
int slot = 0;
|
|
|
|
writeb(0x00, socket_base + 0x806); /* disable all I/O and memory windows */
|
|
|
|
writeb(0x00, socket_base + 0x808); /* I/O window 0 base address */
|
|
writeb(0x00, socket_base + 0x809);
|
|
writeb(0x00, socket_base + 0x80a); /* I/O window 0 end address */
|
|
writeb(0x00, socket_base + 0x80b);
|
|
writeb(0x00, socket_base + 0x836); /* I/O window 0 offset address */
|
|
writeb(0x00, socket_base + 0x837);
|
|
|
|
writeb(0x00, socket_base + 0x80c); /* I/O window 1 base address */
|
|
writeb(0x00, socket_base + 0x80d);
|
|
writeb(0x00, socket_base + 0x80e); /* I/O window 1 end address */
|
|
writeb(0x00, socket_base + 0x80f);
|
|
writeb(0x00, socket_base + 0x838); /* I/O window 1 offset address */
|
|
writeb(0x00, socket_base + 0x839);
|
|
|
|
writeb(0x00, socket_base + 0x810); /* Memory window 0 start address */
|
|
writeb(0x00, socket_base + 0x811);
|
|
writeb(0x00, socket_base + 0x812); /* Memory window 0 end address */
|
|
writeb(0x00, socket_base + 0x813);
|
|
writeb(0x00, socket_base + 0x814); /* Memory window 0 offset */
|
|
writeb(0x00, socket_base + 0x815);
|
|
|
|
writeb(0xc0, socket_base + 0x840); /* Memory window 0 page address */
|
|
|
|
|
|
/* turn off voltage */
|
|
voltage_set(slot, 0, 0);
|
|
|
|
/* disable external hardware */
|
|
printf ("Shutdown and Poweroff Ti PCI1410A\n");
|
|
hardware_disable(slot);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#endif
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
|
|
#define MAX_TUPEL_SZ 512
|
|
#define MAX_FEATURES 4
|
|
int ide_devices_found;
|
|
static int check_ide_device(int slot, int ide_base_bus)
|
|
{
|
|
volatile char *ident = NULL;
|
|
volatile char *feature_p[MAX_FEATURES];
|
|
volatile char *p, *start;
|
|
int n_features = 0;
|
|
uchar func_id = ~0;
|
|
uchar code, len;
|
|
ushort config_base = 0;
|
|
int found = 0;
|
|
int i;
|
|
u32 socket_status;
|
|
|
|
debug ("PCMCIA MEM: %08X\n", pcmcia_cis_ptr);
|
|
|
|
socket_status = readl(socket_base+8);
|
|
|
|
if ((socket_status & 6) != 0 || (socket_status & 0x20) != 0) {
|
|
printf("no card or CardBus card\n");
|
|
return 1;
|
|
}
|
|
|
|
start = p = (volatile char *) pcmcia_cis_ptr;
|
|
|
|
while ((p - start) < MAX_TUPEL_SZ) {
|
|
|
|
code = *p; p += 2;
|
|
|
|
if (code == 0xFF) { /* End of chain */
|
|
break;
|
|
}
|
|
|
|
len = *p; p += 2;
|
|
#if defined(DEBUG) && (DEBUG > 1)
|
|
{
|
|
volatile uchar *q = p;
|
|
printf ("\nTuple code %02x length %d\n\tData:",
|
|
code, len);
|
|
|
|
for (i = 0; i < len; ++i) {
|
|
printf (" %02x", *q);
|
|
q+= 2;
|
|
}
|
|
}
|
|
#endif /* DEBUG */
|
|
switch (code) {
|
|
case CISTPL_VERS_1:
|
|
ident = p + 4;
|
|
break;
|
|
case CISTPL_FUNCID:
|
|
/* Fix for broken SanDisk which may have 0x80 bit set */
|
|
func_id = *p & 0x7F;
|
|
break;
|
|
case CISTPL_FUNCE:
|
|
if (n_features < MAX_FEATURES)
|
|
feature_p[n_features++] = p;
|
|
break;
|
|
case CISTPL_CONFIG:
|
|
config_base = (*(p+6) << 8) + (*(p+4));
|
|
debug ("\n## Config_base = %04x ###\n", config_base);
|
|
default:
|
|
break;
|
|
}
|
|
p += 2 * len;
|
|
}
|
|
|
|
found = identify(ident);
|
|
|
|
if (func_id != ((uchar)~0)) {
|
|
print_funcid (func_id);
|
|
|
|
if (func_id == CISTPL_FUNCID_FIXED)
|
|
found = 1;
|
|
else
|
|
return 1; /* no disk drive */
|
|
}
|
|
|
|
for (i=0; i<n_features; ++i) {
|
|
print_fixed(feature_p[i]);
|
|
}
|
|
|
|
if (!found) {
|
|
printf("unknown card type\n");
|
|
return 1;
|
|
}
|
|
|
|
/* select config index 1 */
|
|
writeb(1, pcmcia_cis_ptr + config_base);
|
|
|
|
#if 0
|
|
printf("Confiuration Option Register: %02x\n", readb(pcmcia_cis_ptr + config_base));
|
|
printf("Card Confiuration and Status Register: %02x\n", readb(pcmcia_cis_ptr + config_base + 2));
|
|
printf("Pin Replacement Register Register: %02x\n", readb(pcmcia_cis_ptr + config_base + 4));
|
|
printf("Socket and Copy Register: %02x\n", readb(pcmcia_cis_ptr + config_base + 6));
|
|
#endif
|
|
ide_devices_found |= (1 << (slot+ide_base_bus));
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int voltage_set(int slot, int vcc, int vpp)
|
|
{
|
|
u32 socket_control;
|
|
int reg=0;
|
|
|
|
switch (slot) {
|
|
case 0:
|
|
reg = socket_base + 0x10;
|
|
break;
|
|
default:
|
|
return 1;
|
|
}
|
|
|
|
socket_control = 0;
|
|
|
|
|
|
switch (vcc) {
|
|
case 50:
|
|
socket_control |= 0x20;
|
|
break;
|
|
case 33:
|
|
socket_control |= 0x30;
|
|
break;
|
|
case 0:
|
|
default: ;
|
|
}
|
|
|
|
switch (vpp) {
|
|
case 120:
|
|
socket_control |= 0x1;
|
|
break;
|
|
case 50:
|
|
socket_control |= 0x2;
|
|
break;
|
|
case 33:
|
|
socket_control |= 0x3;
|
|
break;
|
|
case 0:
|
|
default: ;
|
|
}
|
|
|
|
writel(socket_control, reg);
|
|
|
|
debug ("voltage_set: Ti PCI1410A Slot %d, Vcc=%d.%d, Vpp=%d.%d\n",
|
|
slot, vcc/10, vcc%10, vpp/10, vpp%10);
|
|
|
|
udelay(500);
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int hardware_enable(int slot)
|
|
{
|
|
u32 socket_status;
|
|
u16 brg_ctrl;
|
|
int is_82365sl;
|
|
|
|
socket_status = readl(socket_base+8);
|
|
|
|
if ((socket_status & 6) == 0) {
|
|
|
|
switch (socket_status & 0x3c00) {
|
|
|
|
case 0x400:
|
|
printf("5V ");
|
|
voltage_set(slot, 50, 0);
|
|
break;
|
|
case 0x800:
|
|
voltage_set(slot, 33, 0);
|
|
break;
|
|
case 0xc00:
|
|
voltage_set(slot, 33, 0);
|
|
break;
|
|
default:
|
|
voltage_set(slot, 0, 0);
|
|
break;
|
|
}
|
|
} else {
|
|
voltage_set(slot, 0, 0);
|
|
}
|
|
|
|
pci_read_config_word(devbusfn, PCI_BRIDGE_CONTROL, &brg_ctrl);
|
|
brg_ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
|
|
pci_write_config_word(devbusfn, PCI_BRIDGE_CONTROL, brg_ctrl);
|
|
is_82365sl = ((readb(socket_base+0x800) & 0x0f) == 2);
|
|
writeb(is_82365sl?0x90:0x98, socket_base+0x802);
|
|
writeb(0x67, socket_base+0x803);
|
|
udelay(100000);
|
|
#if 0
|
|
printf("ExCA Id %02x, Card Status %02x, Power config %02x, Interrupt Config %02x, bridge control %04x %d\n",
|
|
readb(socket_base+0x800), readb(socket_base+0x801),
|
|
readb(socket_base+0x802), readb(socket_base+0x803), brg_ctrl, is_82365sl);
|
|
#endif
|
|
|
|
return ((readb(socket_base+0x801)&0x6c)==0x6c)?0:1;
|
|
}
|
|
|
|
|
|
static int hardware_disable(int slot)
|
|
{
|
|
voltage_set(slot, 0, 0);
|
|
return 0;
|
|
}
|
|
|
|
static void print_funcid(int func)
|
|
{
|
|
puts(indent);
|
|
switch (func) {
|
|
case CISTPL_FUNCID_MULTI:
|
|
puts(" Multi-Function");
|
|
break;
|
|
case CISTPL_FUNCID_MEMORY:
|
|
puts(" Memory");
|
|
break;
|
|
case CISTPL_FUNCID_SERIAL:
|
|
puts(" Serial Port");
|
|
break;
|
|
case CISTPL_FUNCID_PARALLEL:
|
|
puts(" Parallel Port");
|
|
break;
|
|
case CISTPL_FUNCID_FIXED:
|
|
puts(" Fixed Disk");
|
|
break;
|
|
case CISTPL_FUNCID_VIDEO:
|
|
puts(" Video Adapter");
|
|
break;
|
|
case CISTPL_FUNCID_NETWORK:
|
|
puts(" Network Adapter");
|
|
break;
|
|
case CISTPL_FUNCID_AIMS:
|
|
puts(" AIMS Card");
|
|
break;
|
|
case CISTPL_FUNCID_SCSI:
|
|
puts(" SCSI Adapter");
|
|
break;
|
|
default:
|
|
puts(" Unknown");
|
|
break;
|
|
}
|
|
puts(" Card\n");
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static void print_fixed(volatile char *p)
|
|
{
|
|
if (p == NULL)
|
|
return;
|
|
|
|
puts(indent);
|
|
|
|
switch (*p) {
|
|
case CISTPL_FUNCE_IDE_IFACE:
|
|
{ uchar iface = *(p+2);
|
|
|
|
puts ((iface == CISTPL_IDE_INTERFACE) ? " IDE" : " unknown");
|
|
puts (" interface ");
|
|
break;
|
|
}
|
|
case CISTPL_FUNCE_IDE_MASTER:
|
|
case CISTPL_FUNCE_IDE_SLAVE:
|
|
{
|
|
uchar f1 = *(p+2);
|
|
uchar f2 = *(p+4);
|
|
|
|
puts((f1 & CISTPL_IDE_SILICON) ? " [silicon]" : " [rotating]");
|
|
|
|
if (f1 & CISTPL_IDE_UNIQUE) {
|
|
puts(" [unique]");
|
|
}
|
|
|
|
puts((f1 & CISTPL_IDE_DUAL) ? " [dual]" : " [single]");
|
|
|
|
if (f2 & CISTPL_IDE_HAS_SLEEP) {
|
|
puts(" [sleep]");
|
|
}
|
|
|
|
if (f2 & CISTPL_IDE_HAS_STANDBY) {
|
|
puts(" [standby]");
|
|
}
|
|
|
|
if (f2 & CISTPL_IDE_HAS_IDLE) {
|
|
puts(" [idle]");
|
|
}
|
|
|
|
if (f2 & CISTPL_IDE_LOW_POWER) {
|
|
puts(" [low power]");
|
|
}
|
|
|
|
if (f2 & CISTPL_IDE_REG_INHIBIT) {
|
|
puts(" [reg inhibit]");
|
|
}
|
|
|
|
if (f2 & CISTPL_IDE_HAS_INDEX) {
|
|
puts(" [index]");
|
|
}
|
|
|
|
if (f2 & CISTPL_IDE_IOIS16) {
|
|
puts(" [IOis16]");
|
|
}
|
|
|
|
break;
|
|
}
|
|
}
|
|
putc('\n');
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
#define MAX_IDENT_CHARS 64
|
|
#define MAX_IDENT_FIELDS 4
|
|
|
|
static char *known_cards[] = {
|
|
"ARGOSY PnPIDE D5",
|
|
NULL
|
|
};
|
|
|
|
static int identify(volatile char *p)
|
|
{
|
|
char id_str[MAX_IDENT_CHARS];
|
|
char data;
|
|
char *t;
|
|
char **card;
|
|
int i, done;
|
|
|
|
if (p == NULL)
|
|
return (0); /* Don't know */
|
|
|
|
t = id_str;
|
|
done =0;
|
|
|
|
for (i=0; i<=4 && !done; ++i, p+=2) {
|
|
while ((data = *p) != '\0') {
|
|
if (data == 0xFF) {
|
|
done = 1;
|
|
break;
|
|
}
|
|
*t++ = data;
|
|
if (t == &id_str[MAX_IDENT_CHARS-1]) {
|
|
done = 1;
|
|
break;
|
|
}
|
|
p += 2;
|
|
}
|
|
if (!done)
|
|
*t++ = ' ';
|
|
}
|
|
*t = '\0';
|
|
while (--t > id_str) {
|
|
if (*t == ' ') {
|
|
*t = '\0';
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
puts(id_str);
|
|
putc('\n');
|
|
|
|
for (card=known_cards; *card; ++card) {
|
|
debug ("## Compare against \"%s\"\n", *card);
|
|
if (strcmp(*card, id_str) == 0) { /* found! */
|
|
debug ("## CARD FOUND ##\n");
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
return 0; /* don't know */
|
|
}
|
|
|
|
#endif /* CONFIG_CMD_PCMCIA */
|