380 lines
7.4 KiB
Plaintext
380 lines
7.4 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
|
|
*/
|
|
|
|
#include <dt-bindings/dma/k3-udma.h>
|
|
#include <dt-bindings/net/ti-dp83867.h>
|
|
|
|
/ {
|
|
chosen {
|
|
stdout-path = "serial2:115200n8";
|
|
tick-timer = &timer1;
|
|
};
|
|
|
|
aliases {
|
|
ethernet0 = &cpsw_port1;
|
|
};
|
|
};
|
|
|
|
&cbass_main{
|
|
u-boot,dm-spl;
|
|
};
|
|
|
|
&cbass_mcu_wakeup {
|
|
u-boot,dm-spl;
|
|
|
|
timer1: timer@40400000 {
|
|
compatible = "ti,omap5430-timer";
|
|
reg = <0x0 0x40400000 0x0 0x80>;
|
|
ti,timer-alwon;
|
|
clock-frequency = <25000000>;
|
|
u-boot,dm-spl;
|
|
};
|
|
|
|
mcu_conf: scm_conf@40f00000 {
|
|
compatible = "syscon", "simple-mfd";
|
|
reg = <0x0 0x40f00000 0x0 0x20000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x0 0x40f00000 0x20000>;
|
|
|
|
phy_sel: cpsw-phy-sel@4040 {
|
|
compatible = "ti,am654-cpsw-phy-sel";
|
|
reg = <0x4040 0x4>;
|
|
reg-names = "gmii-sel";
|
|
};
|
|
};
|
|
|
|
cbass_mcu_navss: mcu_navss {
|
|
compatible = "simple-bus";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
dma-coherent;
|
|
dma-ranges;
|
|
ranges;
|
|
|
|
ti,sci-dev-id = <232>;
|
|
u-boot,dm-spl;
|
|
|
|
mcu_ringacc: ringacc@2b800000 {
|
|
compatible = "ti,am654-navss-ringacc";
|
|
reg = <0x0 0x2b800000 0x0 0x400000>,
|
|
<0x0 0x2b000000 0x0 0x400000>,
|
|
<0x0 0x28590000 0x0 0x100>,
|
|
<0x0 0x2a500000 0x0 0x40000>;
|
|
reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
|
|
ti,num-rings = <286>;
|
|
ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
|
|
ti,sci = <&dmsc>;
|
|
ti,sci-dev-id = <235>;
|
|
u-boot,dm-spl;
|
|
};
|
|
|
|
mcu_udmap: udmap@31150000 {
|
|
compatible = "ti,j721e-navss-mcu-udmap";
|
|
reg = <0x0 0x285c0000 0x0 0x100>,
|
|
<0x0 0x2a800000 0x0 0x40000>,
|
|
<0x0 0x2aa00000 0x0 0x40000>;
|
|
reg-names = "gcfg", "rchanrt", "tchanrt";
|
|
#dma-cells = <3>;
|
|
|
|
ti,ringacc = <&mcu_ringacc>;
|
|
ti,psil-base = <0x6000>;
|
|
|
|
ti,sci = <&dmsc>;
|
|
ti,sci-dev-id = <236>;
|
|
|
|
ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
|
|
<0x0f>; /* TX_HCHAN */
|
|
ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
|
|
<0x0b>; /* RX_HCHAN */
|
|
ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
|
|
u-boot,dm-spl;
|
|
};
|
|
};
|
|
|
|
mcu_cpsw: ethernet@046000000 {
|
|
compatible = "ti,j721e-cpsw-nuss";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
reg = <0x0 0x46000000 0x0 0x200000>;
|
|
reg-names = "cpsw_nuss";
|
|
ranges;
|
|
dma-coherent;
|
|
clocks = <&k3_clks 18 22>;
|
|
clock-names = "fck";
|
|
power-domains = <&k3_pds 18 TI_SCI_PD_EXCLUSIVE>;
|
|
ti,psil-base = <0x7000>;
|
|
cpsw-phy-sel = <&phy_sel>;
|
|
|
|
dmas = <&mcu_udmap &mcu_cpsw 0 UDMA_DIR_TX>,
|
|
<&mcu_udmap &mcu_cpsw 1 UDMA_DIR_TX>,
|
|
<&mcu_udmap &mcu_cpsw 2 UDMA_DIR_TX>,
|
|
<&mcu_udmap &mcu_cpsw 3 UDMA_DIR_TX>,
|
|
<&mcu_udmap &mcu_cpsw 4 UDMA_DIR_TX>,
|
|
<&mcu_udmap &mcu_cpsw 5 UDMA_DIR_TX>,
|
|
<&mcu_udmap &mcu_cpsw 6 UDMA_DIR_TX>,
|
|
<&mcu_udmap &mcu_cpsw 7 UDMA_DIR_TX>,
|
|
<&mcu_udmap &mcu_cpsw 0 UDMA_DIR_RX>;
|
|
dma-names = "tx0", "tx1", "tx2", "tx3",
|
|
"tx4", "tx5", "tx6", "tx7",
|
|
"rx";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
host: host@0 {
|
|
reg = <0>;
|
|
ti,label = "host";
|
|
};
|
|
|
|
cpsw_port1: port@1 {
|
|
reg = <1>;
|
|
ti,mac-only;
|
|
ti,label = "port1";
|
|
ti,syscon-efuse = <&mcu_conf 0x200>;
|
|
};
|
|
};
|
|
|
|
davinci_mdio: mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
bus_freq = <1000000>;
|
|
};
|
|
|
|
cpts {
|
|
clocks = <&k3_clks 18 2>;
|
|
clock-names = "cpts";
|
|
interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "cpts";
|
|
ti,cpts-ext-ts-inputs = <4>;
|
|
ti,cpts-periodic-outputs = <2>;
|
|
};
|
|
|
|
ti,psil-config0 {
|
|
linux,udma-mode = <UDMA_PKT_MODE>;
|
|
statictr-type = <PSIL_STATIC_TR_NONE>;
|
|
ti,needs-epib;
|
|
ti,psd-size = <16>;
|
|
};
|
|
|
|
ti,psil-config1 {
|
|
linux,udma-mode = <UDMA_PKT_MODE>;
|
|
statictr-type = <PSIL_STATIC_TR_NONE>;
|
|
ti,needs-epib;
|
|
ti,psd-size = <16>;
|
|
};
|
|
|
|
ti,psil-config2 {
|
|
linux,udma-mode = <UDMA_PKT_MODE>;
|
|
statictr-type = <PSIL_STATIC_TR_NONE>;
|
|
ti,needs-epib;
|
|
ti,psd-size = <16>;
|
|
};
|
|
|
|
ti,psil-config3 {
|
|
linux,udma-mode = <UDMA_PKT_MODE>;
|
|
statictr-type = <PSIL_STATIC_TR_NONE>;
|
|
ti,needs-epib;
|
|
ti,psd-size = <16>;
|
|
};
|
|
|
|
ti,psil-config4 {
|
|
linux,udma-mode = <UDMA_PKT_MODE>;
|
|
statictr-type = <PSIL_STATIC_TR_NONE>;
|
|
ti,needs-epib;
|
|
ti,psd-size = <16>;
|
|
};
|
|
|
|
ti,psil-config5 {
|
|
linux,udma-mode = <UDMA_PKT_MODE>;
|
|
statictr-type = <PSIL_STATIC_TR_NONE>;
|
|
ti,needs-epib;
|
|
ti,psd-size = <16>;
|
|
};
|
|
|
|
ti,psil-config6 {
|
|
linux,udma-mode = <UDMA_PKT_MODE>;
|
|
statictr-type = <PSIL_STATIC_TR_NONE>;
|
|
ti,needs-epib;
|
|
ti,psd-size = <16>;
|
|
};
|
|
|
|
ti,psil-config7 {
|
|
linux,udma-mode = <UDMA_PKT_MODE>;
|
|
statictr-type = <PSIL_STATIC_TR_NONE>;
|
|
ti,needs-epib;
|
|
ti,psd-size = <16>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&secure_proxy_main {
|
|
u-boot,dm-spl;
|
|
};
|
|
|
|
&dmsc {
|
|
u-boot,dm-spl;
|
|
k3_sysreset: sysreset-controller {
|
|
compatible = "ti,sci-sysreset";
|
|
u-boot,dm-spl;
|
|
};
|
|
};
|
|
|
|
&k3_pds {
|
|
u-boot,dm-spl;
|
|
};
|
|
|
|
&k3_clks {
|
|
u-boot,dm-spl;
|
|
};
|
|
|
|
&k3_reset {
|
|
u-boot,dm-spl;
|
|
};
|
|
|
|
&wkup_pmx0 {
|
|
u-boot,dm-spl;
|
|
mcu_cpsw_pins_default: mcu_cpsw_pins_default {
|
|
pinctrl-single,pins = <
|
|
J721E_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* (N4) MCU_RGMII1_TX_CTL */
|
|
J721E_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* (N5) MCU_RGMII1_RX_CTL */
|
|
J721E_WKUP_IOPAD(0x0060, PIN_OUTPUT, 0) /* (M2) MCU_RGMII1_TD3 */
|
|
J721E_WKUP_IOPAD(0x0064, PIN_OUTPUT, 0) /* (M3) MCU_RGMII1_TD2 */
|
|
J721E_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* (M4) MCU_RGMII1_TD1 */
|
|
J721E_WKUP_IOPAD(0x006c, PIN_OUTPUT, 0) /* (M5) MCU_RGMII1_TD0 */
|
|
J721E_WKUP_IOPAD(0x0078, PIN_INPUT, 0) /* (L2) MCU_RGMII1_RD3 */
|
|
J721E_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* (L5) MCU_RGMII1_RD2 */
|
|
J721E_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* (M6) MCU_RGMII1_RD1 */
|
|
J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* (L6) MCU_RGMII1_RD0 */
|
|
J721E_WKUP_IOPAD(0x0070, PIN_INPUT, 0) /* (N1) MCU_RGMII1_TXC */
|
|
J721E_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* (M1) MCU_RGMII1_RXC */
|
|
>;
|
|
};
|
|
|
|
mcu_mdio_pins_default: mcu_mdio1_pins_default {
|
|
pinctrl-single,pins = <
|
|
J721E_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */
|
|
J721E_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&main_pmx0 {
|
|
u-boot,dm-spl;
|
|
};
|
|
|
|
&main_uart0 {
|
|
u-boot,dm-spl;
|
|
};
|
|
|
|
&mcu_uart0 {
|
|
u-boot,dm-spl;
|
|
};
|
|
|
|
&main_sdhci0 {
|
|
u-boot,dm-spl;
|
|
};
|
|
|
|
&main_sdhci1 {
|
|
u-boot,dm-spl;
|
|
};
|
|
|
|
&main_usbss0_pins_default {
|
|
u-boot,dm-spl;
|
|
};
|
|
|
|
&usbss0 {
|
|
u-boot,dm-spl;
|
|
ti,usb2-only;
|
|
};
|
|
|
|
&usb0 {
|
|
dr_mode = "peripheral";
|
|
u-boot,dm-spl;
|
|
};
|
|
|
|
&mcu_cpsw {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
|
|
};
|
|
|
|
&davinci_mdio {
|
|
phy0: ethernet-phy@0 {
|
|
reg = <0>;
|
|
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
|
|
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
|
|
};
|
|
};
|
|
|
|
&cpsw_port1 {
|
|
phy-mode = "rgmii-rxid";
|
|
phy-handle = <&phy0>;
|
|
};
|
|
|
|
&mcu_cpsw {
|
|
reg = <0x0 0x46000000 0x0 0x200000>,
|
|
<0x0 0x40f00200 0x0 0x2>;
|
|
reg-names = "cpsw_nuss", "mac_efuse";
|
|
|
|
cpsw-phy-sel@40f04040 {
|
|
compatible = "ti,am654-cpsw-phy-sel";
|
|
reg= <0x0 0x40f04040 0x0 0x4>;
|
|
reg-names = "gmii-sel";
|
|
};
|
|
};
|
|
|
|
&main_mmc1_pins_default {
|
|
u-boot,dm-spl;
|
|
};
|
|
|
|
&wkup_i2c0_pins_default {
|
|
u-boot,dm-spl;
|
|
};
|
|
|
|
&wkup_i2c0 {
|
|
u-boot,dm-spl;
|
|
};
|
|
|
|
&main_i2c0 {
|
|
u-boot,dm-spl;
|
|
};
|
|
|
|
&main_i2c0_pins_default {
|
|
u-boot,dm-spl;
|
|
};
|
|
|
|
&exp2 {
|
|
u-boot,dm-spl;
|
|
};
|
|
|
|
&mcu_fss0_ospi0_pins_default {
|
|
u-boot,dm-spl;
|
|
};
|
|
|
|
&fss {
|
|
u-boot,dm-spl;
|
|
};
|
|
|
|
&ospi0 {
|
|
u-boot,dm-spl;
|
|
|
|
flash@0 {
|
|
u-boot,dm-spl;
|
|
};
|
|
};
|
|
|
|
&ospi1 {
|
|
u-boot,dm-spl;
|
|
|
|
flash@0 {
|
|
u-boot,dm-spl;
|
|
};
|
|
};
|
|
|
|
&mcu_fss0_ospi1_pins_default {
|
|
u-boot,dm-spl;
|
|
};
|