u-boot-brain/arch/powerpc/lib/ppccache.S
Tony O'Brien 76866600f5 powerpc: Enable flush and invalidate dcache by range for MPC85xx
Commit ac337168a unified functions to flush and invalidate dcache by
range. These two functions were no-ops for SoCs other than 4xx and
MPC86xx. Adding these functions seemed to be correct but introduced
issues in some drivers when the dcache was flushed. While the root
cause was under investigation, these functions were disabled in
Commit cb1629f91a for affected SoCs, including the MPC85xx, to make
the various drivers work.

On the T208x USB stopped working after v2016.07 was pulled.  After
re-enabling the dcache functions for the MPC85xx it started working
again.  The USB and DPPA Ethernet drivers have been seen as
operational after this change but other drivers cannot be tested.

Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Tony O'Brien <tony.obrien@alliedtelesis.co.nz>
Cc: Marek Vasut <marex@denx.de>
Cc: York Sun <york.sun@nxp.com>
Reviewed-by: York Sun <york.sun>
2017-01-24 13:28:31 -08:00

109 lines
2.8 KiB
ArmAsm

/*
* Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
* Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
* Copyright (C) 2000, 2001,2002 Wolfgang Denk <wd@denx.de>
* Copyright Freescale Semiconductor, Inc. 2004, 2006.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <config.h>
#include <ppc_asm.tmpl>
#include <ppc_defs.h>
#include <asm/cache.h>
/*------------------------------------------------------------------------------- */
/* Function: ppcDcbf */
/* Description: Data Cache block flush */
/* Input: r3 = effective address */
/* Output: none. */
/*------------------------------------------------------------------------------- */
.globl ppcDcbf
ppcDcbf:
dcbf r0,r3
blr
/*------------------------------------------------------------------------------- */
/* Function: ppcDcbi */
/* Description: Data Cache block Invalidate */
/* Input: r3 = effective address */
/* Output: none. */
/*------------------------------------------------------------------------------- */
.globl ppcDcbi
ppcDcbi:
dcbi r0,r3
blr
/*--------------------------------------------------------------------------
* Function: ppcDcbz
* Description: Data Cache block zero.
* Input: r3 = effective address
* Output: none.
*-------------------------------------------------------------------------- */
.globl ppcDcbz
ppcDcbz:
dcbz r0,r3
blr
/*------------------------------------------------------------------------------- */
/* Function: ppcSync */
/* Description: Processor Synchronize */
/* Input: none. */
/* Output: none. */
/*------------------------------------------------------------------------------- */
.globl ppcSync
ppcSync:
sync
blr
/*
* Write any modified data cache blocks out to memory and invalidate them.
* Does not invalidate the corresponding instruction cache blocks.
*
* flush_dcache_range(unsigned long start, unsigned long stop)
*/
_GLOBAL(flush_dcache_range)
#if defined(CONFIG_4xx) || defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
li r5,L1_CACHE_BYTES-1
andc r3,r3,r5
subf r4,r3,r4
add r4,r4,r5
srwi. r4,r4,L1_CACHE_SHIFT
beqlr
mtctr r4
1: dcbf 0,r3
addi r3,r3,L1_CACHE_BYTES
bdnz 1b
sync /* wait for dcbst's to get to ram */
#endif
blr
/*
* Like above, but invalidate the D-cache. This is used by the 8xx
* to invalidate the cache so the PPC core doesn't get stale data
* from the CPM (no cache snooping here :-).
*
* invalidate_dcache_range(unsigned long start, unsigned long stop)
*/
_GLOBAL(invalidate_dcache_range)
#if defined(CONFIG_4xx) || defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
li r5,L1_CACHE_BYTES-1
andc r3,r3,r5
subf r4,r3,r4
add r4,r4,r5
srwi. r4,r4,L1_CACHE_SHIFT
beqlr
mtctr r4
sync
1: dcbi 0,r3
addi r3,r3,L1_CACHE_BYTES
bdnz 1b
sync /* wait for dcbi's to get to ram */
#endif
blr