mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-26 11:58:52 +09:00
![Lokesh Vutla](/assets/img/avatar_default.png)
Sync all J7200 related v5.11-rc6 Linux kernel dts into U-Boot. MCU R5F nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid regressions, r5f nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
284 lines
6.7 KiB
Plaintext
284 lines
6.7 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "k3-j7200-som-p0.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/net/ti-dp83867.h>
|
|
#include <dt-bindings/mux/ti-serdes.h>
|
|
|
|
/ {
|
|
chosen {
|
|
stdout-path = "serial2:115200n8";
|
|
bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000";
|
|
};
|
|
|
|
aliases {
|
|
remoteproc0 = &mcu_r5fss0_core0;
|
|
remoteproc1 = &mcu_r5fss0_core1;
|
|
remoteproc2 = &main_r5fss0_core0;
|
|
remoteproc3 = &main_r5fss0_core1;
|
|
};
|
|
|
|
vdd_mmc1: fixedregulator-sd {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vdd_mmc1";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
enable-active-high;
|
|
gpio = <&exp2 2 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
vdd_sd_dv: gpio-regulator-vdd-sd-dv {
|
|
compatible = "regulator-gpio";
|
|
regulator-name = "vdd_sd_dv";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&vdd_sd_dv_pins_default>;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
gpios = <&main_gpio0 55 GPIO_ACTIVE_HIGH>;
|
|
states = <1800000 0x0
|
|
3300000 0x1>;
|
|
};
|
|
};
|
|
|
|
&wkup_pmx0 {
|
|
wkup_i2c0_pins_default: wkup-i2c0-pins-default {
|
|
pinctrl-single,pins = <
|
|
J721E_WKUP_IOPAD(0x100, PIN_INPUT_PULLUP, 0) /* (F20) WKUP_I2C0_SCL */
|
|
J721E_WKUP_IOPAD(0x104, PIN_INPUT_PULLUP, 0) /* (H21) WKUP_I2C0_SDA */
|
|
>;
|
|
};
|
|
|
|
wkup_gpio_pins_default: wkup-gpio-pins-default {
|
|
pinctrl-single,pins = <
|
|
J721E_WKUP_IOPAD(0xd8, PIN_INPUT, 7) /* (C14) WKUP_GPIO0_6 */
|
|
>;
|
|
};
|
|
|
|
mcu_cpsw_pins_default: mcu-cpsw-pins-default {
|
|
pinctrl-single,pins = <
|
|
J721E_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */
|
|
J721E_WKUP_IOPAD(0x006c, PIN_INPUT, 0) /* MCU_RGMII1_RX_CTL */
|
|
J721E_WKUP_IOPAD(0x0070, PIN_OUTPUT, 0) /* MCU_RGMII1_TD3 */
|
|
J721E_WKUP_IOPAD(0x0074, PIN_OUTPUT, 0) /* MCU_RGMII1_TD2 */
|
|
J721E_WKUP_IOPAD(0x0078, PIN_OUTPUT, 0) /* MCU_RGMII1_TD1 */
|
|
J721E_WKUP_IOPAD(0x007c, PIN_OUTPUT, 0) /* MCU_RGMII1_TD0 */
|
|
J721E_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* MCU_RGMII1_RD3 */
|
|
J721E_WKUP_IOPAD(0x008c, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */
|
|
J721E_WKUP_IOPAD(0x0090, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */
|
|
J721E_WKUP_IOPAD(0x0094, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */
|
|
J721E_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* MCU_RGMII1_TXC */
|
|
J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* MCU_RGMII1_RXC */
|
|
>;
|
|
};
|
|
|
|
mcu_mdio_pins_default: mcu-mdio1-pins-default {
|
|
pinctrl-single,pins = <
|
|
J721E_WKUP_IOPAD(0x009c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */
|
|
J721E_WKUP_IOPAD(0x0098, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&main_pmx0 {
|
|
main_i2c0_pins_default: main-i2c0-pins-default {
|
|
pinctrl-single,pins = <
|
|
J721E_IOPAD(0xd4, PIN_INPUT_PULLUP, 0) /* (V3) I2C0_SCL */
|
|
J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */
|
|
>;
|
|
};
|
|
|
|
main_i2c1_pins_default: main-i2c1-pins-default {
|
|
pinctrl-single,pins = <
|
|
J721E_IOPAD(0xdc, PIN_INPUT_PULLUP, 3) /* (U3) ECAP0_IN_APWM_OUT.I2C1_SCL */
|
|
J721E_IOPAD(0xe0, PIN_INPUT_PULLUP, 3) /* (T3) EXT_REFCLK1.I2C1_SDA */
|
|
>;
|
|
};
|
|
|
|
main_mmc1_pins_default: main-mmc1-pins-default {
|
|
pinctrl-single,pins = <
|
|
J721E_IOPAD(0x104, PIN_INPUT, 0) /* (M20) MMC1_CMD */
|
|
J721E_IOPAD(0x100, PIN_INPUT, 0) /* (P21) MMC1_CLK */
|
|
J721E_IOPAD(0xfc, PIN_INPUT, 0) /* (P25) MMC1_CLKLB */
|
|
J721E_IOPAD(0xf8, PIN_INPUT, 0) /* (M19) MMC1_DAT0 */
|
|
J721E_IOPAD(0xf4, PIN_INPUT, 0) /* (N21) MMC1_DAT1 */
|
|
J721E_IOPAD(0xf0, PIN_INPUT, 0) /* (N20) MMC1_DAT2 */
|
|
J721E_IOPAD(0xec, PIN_INPUT, 0) /* (N19) MMC1_DAT3 */
|
|
J721E_IOPAD(0xe4, PIN_INPUT, 8) /* (V1) TIMER_IO0.MMC1_SDCD */
|
|
>;
|
|
};
|
|
|
|
vdd_sd_dv_pins_default: vdd_sd_dv_pins_default {
|
|
pinctrl-single,pins = <
|
|
J721E_IOPAD(0xd0, PIN_OUTPUT, 7) /* (T5) SPI0_D1.GPIO0_55 */
|
|
>;
|
|
};
|
|
|
|
main_usbss0_pins_default: main-usbss0-pins-default {
|
|
pinctrl-single,pins = <
|
|
J721E_IOPAD(0x120, PIN_OUTPUT, 0) /* (T4) USB0_DRVVBUS */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&wkup_uart0 {
|
|
/* Wakeup UART is used by System firmware */
|
|
status = "reserved";
|
|
};
|
|
|
|
&main_uart0 {
|
|
/* Shared with ATF on this platform */
|
|
power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
|
|
};
|
|
|
|
&main_uart2 {
|
|
/* MAIN UART 2 is used by R5F firmware */
|
|
status = "reserved";
|
|
};
|
|
|
|
&main_uart3 {
|
|
/* UART not brought out */
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_uart4 {
|
|
/* UART not brought out */
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_uart5 {
|
|
/* UART not brought out */
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_uart6 {
|
|
/* UART not brought out */
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_uart7 {
|
|
/* UART not brought out */
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_uart8 {
|
|
/* UART not brought out */
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_uart9 {
|
|
/* UART not brought out */
|
|
status = "disabled";
|
|
};
|
|
|
|
&mcu_cpsw {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
|
|
};
|
|
|
|
&davinci_mdio {
|
|
phy0: ethernet-phy@0 {
|
|
reg = <0>;
|
|
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
|
|
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
|
|
};
|
|
};
|
|
|
|
&cpsw_port1 {
|
|
phy-mode = "rgmii-rxid";
|
|
phy-handle = <&phy0>;
|
|
};
|
|
|
|
&main_i2c0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&main_i2c0_pins_default>;
|
|
clock-frequency = <400000>;
|
|
|
|
exp1: gpio@20 {
|
|
compatible = "ti,tca6416";
|
|
reg = <0x20>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
exp2: gpio@22 {
|
|
compatible = "ti,tca6424";
|
|
reg = <0x22>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
};
|
|
|
|
/*
|
|
* The j7200 CPB board is identical to the CPB used for J721E, the SOMs can be
|
|
* swapped on the CPB.
|
|
*
|
|
* main_i2c1 of J7200 is connected to the CPB i2c bus labeled as i2c3.
|
|
* The i2c1 of the CPB (as it is labeled) is not connected to j7200.
|
|
*/
|
|
&main_i2c1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&main_i2c1_pins_default>;
|
|
clock-frequency = <400000>;
|
|
|
|
exp3: gpio@20 {
|
|
compatible = "ti,tca6408";
|
|
reg = <0x20>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-line-names = "CODEC_RSTz", "CODEC_SPARE1", "UB926_RESETn",
|
|
"UB926_LOCK", "UB926_PWR_SW_CNTRL",
|
|
"UB926_TUNER_RESET", "UB926_GPIO_SPARE", "";
|
|
};
|
|
};
|
|
|
|
&main_sdhci0 {
|
|
/* eMMC */
|
|
non-removable;
|
|
ti,driver-strength-ohm = <50>;
|
|
disable-wp;
|
|
};
|
|
|
|
&main_sdhci1 {
|
|
/* SD card */
|
|
pinctrl-0 = <&main_mmc1_pins_default>;
|
|
pinctrl-names = "default";
|
|
vmmc-supply = <&vdd_mmc1>;
|
|
vqmmc-supply = <&vdd_sd_dv>;
|
|
ti,driver-strength-ohm = <50>;
|
|
disable-wp;
|
|
};
|
|
|
|
&serdes_ln_ctrl {
|
|
idle-states = <J7200_SERDES0_LANE0_PCIE1_LANE0>, <J7200_SERDES0_LANE1_PCIE1_LANE1>,
|
|
<J7200_SERDES0_LANE2_QSGMII_LANE1>, <J7200_SERDES0_LANE3_IP4_UNUSED>;
|
|
};
|
|
|
|
&usb_serdes_mux {
|
|
idle-states = <1>; /* USB0 to SERDES lane 3 */
|
|
};
|
|
|
|
&usbss0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&main_usbss0_pins_default>;
|
|
ti,vbus-divider;
|
|
ti,usb2-only;
|
|
};
|
|
|
|
&usb0 {
|
|
dr_mode = "otg";
|
|
maximum-speed = "high-speed";
|
|
};
|
|
|
|
&tscadc0 {
|
|
adc {
|
|
ti,adc-channels = <0 1 2 3 4 5 6 7>;
|
|
};
|
|
};
|