mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-09-08 05:43:21 +09:00
![Marek Vasut](/assets/img/avatar_default.png)
Implement support for saving ARM register R4 early during boot using save_boot_params . Implement support for decoding the stored register R4 value in spl_boot_device() to obtain boot device from which the SoC booted. This way, the SPL will always load U-Boot from the same device from which the SPL itself booted instead of using hard-coded boot device. This functionality is useful for example when booting sama5d2-xplained from SD card, where by default the SPL would try loading the U-Boot from eMMC and fail. This is because eMMC is on SDHCI0 (BOOT_DEVICE_MMC1), while SD slot is on SDHCI1 (BOOT_DEVICE_MMC2) and the SPL was hard-wired to always boot from BOOT_DEVICE_MMC1. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
22 lines
710 B
Makefile
22 lines
710 B
Makefile
#
|
|
# SPDX-License-Identifier: GPL-2.0+
|
|
#
|
|
|
|
obj-$(CONFIG_AT91_WANTS_COMMON_PHY) += phy.o
|
|
ifneq ($(CONFIG_SPL_BUILD),)
|
|
obj-$(CONFIG_AT91SAM9260) += sdram.o spl_at91.o
|
|
obj-$(CONFIG_AT91SAM9G20) += sdram.o spl_at91.o
|
|
obj-$(CONFIG_AT91SAM9M10G45) += mpddrc.o spl_at91.o
|
|
obj-$(CONFIG_AT91SAM9N12) += mpddrc.o spl_at91.o
|
|
obj-$(CONFIG_AT91SAM9X5) += mpddrc.o spl_at91.o
|
|
obj-$(CONFIG_SAMA5D2) += bootparams_atmel.o mpddrc.o spl_atmel.o matrix.o atmel_sfr.o
|
|
obj-$(CONFIG_SAMA5D3) += mpddrc.o spl_atmel.o
|
|
obj-$(CONFIG_SAMA5D4) += mpddrc.o spl_atmel.o matrix.o atmel_sfr.o
|
|
obj-y += spl.o
|
|
endif
|
|
|
|
obj-y += clock.o
|
|
obj-$(CONFIG_CPU_ARM920T) += arm920t/
|
|
obj-$(CONFIG_CPU_ARM926EJS) += arm926ejs/
|
|
obj-$(CONFIG_CPU_V7) += armv7/
|