mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-21 01:18:52 +09:00
![Stefan Roese](/assets/img/avatar_default.png)
This patch starts a bit PPC4xx header cleanup. First patch mostly touches PPC440 files. A later patch will touch the PPC405 files as well. This cleanup is done by creating header files for all SoC versions and moving the SoC specific defines into these special headers. This way the common header ppc405.h and ppc440.h can be cleaned up finally. Signed-off-by: Stefan Roese <sr@denx.de>
368 lines
16 KiB
C
368 lines
16 KiB
C
/*
|
|
* (C) Copyright 2005
|
|
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
/*----------------------------------------------------------------------------+
|
|
| FPGA registers and bit definitions
|
|
+----------------------------------------------------------------------------*/
|
|
/*
|
|
* PowerPC 440EP Board FPGA is reached with physical address 0x80001FF0.
|
|
* TLB initialization makes it correspond to logical address 0x80001FF0.
|
|
* => Done init_chip.s in bootlib
|
|
*/
|
|
#define FPGA_BASE_ADDR 0x80002000
|
|
|
|
/*----------------------------------------------------------------------------+
|
|
| Board Jumpers Setting Register
|
|
| Board Settings provided by jumpers
|
|
+----------------------------------------------------------------------------*/
|
|
#define FPGA_SETTING_REG (FPGA_BASE_ADDR+0x3)
|
|
/* Boot from small flash */
|
|
#define FPGA_SET_REG_BOOT_SMALL_FLASH 0x80
|
|
/* Operational Flash versus SRAM position in Memory Map */
|
|
#define FPGA_SET_REG_OP_CODE_SRAM_SEL_MASK 0x40
|
|
#define FPGA_SET_REG_OP_CODE_FLASH_ABOVE 0x40
|
|
#define FPGA_SET_REG_SRAM_ABOVE 0x00
|
|
/* Boot From NAND Flash */
|
|
#define FPGA_SET_REG_BOOT_NAND_FLASH_MASK 0x40
|
|
#define FPGA_SET_REG_BOOT_NAND_FLASH_SELECT 0x00
|
|
/* On Board PCI Arbiter Select */
|
|
#define FPGA_SET_REG_PCI_EXT_ARBITER_SEL_MASK 0x10
|
|
#define FPGA_SET_REG_PCI_EXT_ARBITER_SEL 0x00
|
|
|
|
/*----------------------------------------------------------------------------+
|
|
| Functions Selection Register 1
|
|
+----------------------------------------------------------------------------*/
|
|
#define FPGA_SELECTION_1_REG (FPGA_BASE_ADDR+0x4)
|
|
#define FPGA_SEL_1_REG_PHY_MASK 0xE0
|
|
#define FPGA_SEL_1_REG_MII 0x80
|
|
#define FPGA_SEL_1_REG_RMII 0x40
|
|
#define FPGA_SEL_1_REG_SMII 0x20
|
|
#define FPGA_SEL_1_REG_USB2_DEV_SEL 0x10 /* USB2 Device Selection */
|
|
#define FPGA_SEL_1_REG_USB2_HOST_SEL 0x08 /* USB2 Host Selection */
|
|
#define FPGA_SEL_1_REG_NF_SELEC_MASK 0x07 /* NF Selection Mask */
|
|
#define FPGA_SEL_1_REG_NF0_SEL_BY_NFCS1 0x04 /* NF0 Selected by NF_CS1 */
|
|
#define FPGA_SEL_1_REG_NF1_SEL_BY_NFCS2 0x02 /* NF1 Selected by NF_CS2 */
|
|
#define FPGA_SEL_1_REG_NF1_SEL_BY_NFCS3 0x01 /* NF1 Selected by NF_CS3 */
|
|
|
|
/*----------------------------------------------------------------------------+
|
|
| Functions Selection Register 2
|
|
+----------------------------------------------------------------------------*/
|
|
#define FPGA_SELECTION_2_REG (FPGA_BASE_ADDR+0x5)
|
|
#define FPGA_SEL2_REG_IIC1_SCP_SEL_MASK 0x80 /* IIC1 / SCP Selection */
|
|
#define FPGA_SEL2_REG_SEL_FRAM 0x80 /* FRAM on IIC1 bus selected - SCP Select */
|
|
#define FPGA_SEL2_REG_SEL_SCP 0x80 /* Identical to SCP Selection */
|
|
#define FPGA_SEL2_REG_SEL_IIC1 0x00 /* IIC1 Selection - Default Value */
|
|
#define FPGA_SEL2_REG_SEL_DMA_A_B 0x40 /* DMA A & B channels selected */
|
|
#define FPGA_SEL2_REG_SEL_DMA_C_D 0x20 /* DMA C & D channels selected */
|
|
#define FPGA_SEL2_REG_DMA_EOT_TC_3_SEL 0x10 /* 0 = EOT - input to 440EP */
|
|
/* 1 = TC - output from 440EP */
|
|
#define FPGA_SEL2_REG_DMA_EOT_TC_2_SEL 0x08 /* 0 = EOT (input to 440EP) */
|
|
/* 1 = TC (output from 440EP) */
|
|
#define FPGA_SEL2_REG_SEL_GPIO_1 0x04 /* EBC_GPIO & USB2_GPIO selected */
|
|
#define FPGA_SEL2_REG_SEL_GPIO_2 0x02 /* Ether._GPIO & UART_GPIO selected */
|
|
#define FPGA_SEL2_REG_SEL_GPIO_3 0x01 /* DMA_GPIO & Trace_GPIO selected */
|
|
|
|
/*----------------------------------------------------------------------------+
|
|
| Functions Selection Register 3
|
|
+----------------------------------------------------------------------------*/
|
|
#define FPGA_SELECTION_3_REG (FPGA_BASE_ADDR+0x6)
|
|
#define FPGA_SEL3_REG_EXP_SLOT_EN 0x80 /* Expansion Slot enabled */
|
|
#define FPGA_SEL3_REG_SEL_UART_CONFIG_MASK 0x70
|
|
#define FPGA_SEL3_REG_SEL_UART_CONFIG1 0x40 /* one 8_pin UART */
|
|
#define FPGA_SEL3_REG_SEL_UART_CONFIG2 0x20 /* two 4_pin UARTs */
|
|
#define FPGA_SEL3_REG_SEL_UART_CONFIG3 0x10 /* one 4_pin & two 2_pin UARTs */
|
|
#define FPGA_SEL3_REG_SEL_UART_CONFIG4 0x08 /* four 2_pin UARTs */
|
|
#define FPGA_SEL3_REG_DTR_DSR_MODE_4_PIN_UART 0x00 /* DTR/DSR mode for 4_pin_UART */
|
|
#define FPGA_SEL3_REG_RTS_CTS_MODE_4_PIN_UART 0x04 /* RTS/CTS mode for 4_pin_UART */
|
|
|
|
/*----------------------------------------------------------------------------+
|
|
| Soft Reset Register
|
|
+----------------------------------------------------------------------------*/
|
|
#define FPGA_RESET_REG (FPGA_BASE_ADDR+0x7)
|
|
#define FPGA_RESET_REG_RESET_USB20_DEV 0x80 /* Hard Reset of the GT3200 */
|
|
#define FPGA_RESET_REG_RESET_DISPLAY 0x40 /* Hard Reset on Display Device */
|
|
#define FPGA_RESET_REG_STATUS_LED_0 0x08 /* 1 = Led On */
|
|
#define FPGA_RESET_REG_STATUS_LED_1 0x04 /* 1 = Led On */
|
|
#define FPGA_RESET_REG_STATUS_LED_2 0x02 /* 1 = Led On */
|
|
#define FPGA_RESET_REG_STATUS_LED_3 0x01 /* 1 = Led On */
|
|
|
|
|
|
/*----------------------------------------------------------------------------+
|
|
| SDR Configuration registers
|
|
+----------------------------------------------------------------------------*/
|
|
#define SDR0_SDSTP1_EBC_ROM_BS_MASK 0x00006000 /* EBC Boot Size Mask */
|
|
#define SDR0_SDSTP1_EBC_ROM_BS_32BIT 0x00004000 /* EBC 32 bits */
|
|
#define SDR0_SDSTP1_EBC_ROM_BS_16BIT 0x00002000 /* EBC 16 Bits */
|
|
#define SDR0_SDSTP1_EBC_ROM_BS_8BIT 0x00000000 /* EBC 8 Bits */
|
|
|
|
#define SDR0_SDSTP1_BOOT_SEL_MASK 0x00001800 /* Boot device Selection Mask */
|
|
#define SDR0_SDSTP1_BOOT_SEL_EBC 0x00000000 /* EBC */
|
|
#define SDR0_SDSTP1_BOOT_SEL_PCI 0x00000800 /* PCI */
|
|
#define SDR0_SDSTP1_BOOT_SEL_NDFC 0x00001000 /* NDFC */
|
|
|
|
/* Serial Device Enabled - Addr = 0xA8 */
|
|
#define SDR0_PSTRP0_BOOTSTRAP_IIC_A8_EN SDR0_PSTRP0_BOOTSTRAP_SETTINGS5
|
|
/* Serial Device Enabled - Addr = 0xA4 */
|
|
#define SDR0_PSTRP0_BOOTSTRAP_IIC_A4_EN SDR0_PSTRP0_BOOTSTRAP_SETTINGS7
|
|
|
|
/* Pin Straps Reg */
|
|
#define SDR0_PSTRP0 0x0040
|
|
#define SDR0_PSTRP0_BOOTSTRAP_MASK 0xE0000000 /* Strap Bits */
|
|
|
|
#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS0 0x00000000 /* Default strap settings 0 */
|
|
#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS1 0x20000000 /* Default strap settings 1 */
|
|
#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS2 0x40000000 /* Default strap settings 2 */
|
|
#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS3 0x60000000 /* Default strap settings 3 */
|
|
#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS4 0x80000000 /* Default strap settings 4 */
|
|
#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS5 0xA0000000 /* Default strap settings 5 */
|
|
#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS6 0xC0000000 /* Default strap settings 6 */
|
|
#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS7 0xE0000000 /* Default strap settings 7 */
|
|
|
|
/*----------------------------------------------------------------------------+
|
|
| EBC Configuration Register - EBC0_CFG
|
|
+----------------------------------------------------------------------------*/
|
|
/* External Bus Three-State Control */
|
|
#define EBC0_CFG_EBTC_DRIVEN 0x80000000
|
|
/* Device-Paced Time-out Disable */
|
|
#define EBC0_CFG_PTD_ENABLED 0x00000000
|
|
/* Ready Timeout Count */
|
|
#define EBC0_CFG_RTC_MASK 0x38000000
|
|
#define EBC0_CFG_RTC_16PERCLK 0x00000000
|
|
#define EBC0_CFG_RTC_32PERCLK 0x08000000
|
|
#define EBC0_CFG_RTC_64PERCLK 0x10000000
|
|
#define EBC0_CFG_RTC_128PERCLK 0x18000000
|
|
#define EBC0_CFG_RTC_256PERCLK 0x20000000
|
|
#define EBC0_CFG_RTC_512PERCLK 0x28000000
|
|
#define EBC0_CFG_RTC_1024PERCLK 0x30000000
|
|
#define EBC0_CFG_RTC_2048PERCLK 0x38000000
|
|
/* External Master Priority Low */
|
|
#define EBC0_CFG_EMPL_LOW 0x00000000
|
|
#define EBC0_CFG_EMPL_MEDIUM_LOW 0x02000000
|
|
#define EBC0_CFG_EMPL_MEDIUM_HIGH 0x04000000
|
|
#define EBC0_CFG_EMPL_HIGH 0x06000000
|
|
/* External Master Priority High */
|
|
#define EBC0_CFG_EMPH_LOW 0x00000000
|
|
#define EBC0_CFG_EMPH_MEDIUM_LOW 0x00800000
|
|
#define EBC0_CFG_EMPH_MEDIUM_HIGH 0x01000000
|
|
#define EBC0_CFG_EMPH_HIGH 0x01800000
|
|
/* Chip Select Three-State Control */
|
|
#define EBC0_CFG_CSTC_DRIVEN 0x00400000
|
|
/* Burst Prefetch */
|
|
#define EBC0_CFG_BPF_ONEDW 0x00000000
|
|
#define EBC0_CFG_BPF_TWODW 0x00100000
|
|
#define EBC0_CFG_BPF_FOURDW 0x00200000
|
|
/* External Master Size */
|
|
#define EBC0_CFG_EMS_8BIT 0x00000000
|
|
/* Power Management Enable */
|
|
#define EBC0_CFG_PME_DISABLED 0x00000000
|
|
#define EBC0_CFG_PME_ENABLED 0x00020000
|
|
/* Power Management Timer */
|
|
#define EBC0_CFG_PMT_ENCODE(n) ((((unsigned long)(n))&0x1F)<<12)
|
|
|
|
/*----------------------------------------------------------------------------+
|
|
| Peripheral Bank Configuration Register - EBC0_BnCR
|
|
+----------------------------------------------------------------------------*/
|
|
/* BAS - Base Address Select */
|
|
#define EBC0_BNCR_BAS_ENCODE(n) ((((unsigned long)(n))&0xFFF00000)<<0)
|
|
/* BS - Bank Size */
|
|
#define EBC0_BNCR_BS_MASK 0x000E0000
|
|
#define EBC0_BNCR_BS_1MB 0x00000000
|
|
#define EBC0_BNCR_BS_2MB 0x00020000
|
|
#define EBC0_BNCR_BS_4MB 0x00040000
|
|
#define EBC0_BNCR_BS_8MB 0x00060000
|
|
#define EBC0_BNCR_BS_16MB 0x00080000
|
|
#define EBC0_BNCR_BS_32MB 0x000A0000
|
|
#define EBC0_BNCR_BS_64MB 0x000C0000
|
|
#define EBC0_BNCR_BS_128MB 0x000E0000
|
|
/* BU - Bank Usage */
|
|
#define EBC0_BNCR_BU_MASK 0x00018000
|
|
#define EBC0_BNCR_BU_RO 0x00008000
|
|
#define EBC0_BNCR_BU_WO 0x00010000
|
|
#define EBC0_BNCR_BU_RW 0x00018000
|
|
/* BW - Bus Width */
|
|
#define EBC0_BNCR_BW_MASK 0x00006000
|
|
#define EBC0_BNCR_BW_8BIT 0x00000000
|
|
#define EBC0_BNCR_BW_16BIT 0x00002000
|
|
#define EBC0_BNCR_BW_32BIT 0x00004000
|
|
|
|
/*----------------------------------------------------------------------------+
|
|
| Peripheral Bank Access Parameters - EBC0_BnAP
|
|
+----------------------------------------------------------------------------*/
|
|
/* Burst Mode Enable */
|
|
#define EBC0_BNAP_BME_ENABLED 0x80000000
|
|
#define EBC0_BNAP_BME_DISABLED 0x00000000
|
|
/* Transfert Wait */
|
|
#define EBC0_BNAP_TWT_ENCODE(n) ((((unsigned long)(n))&0xFF)<<23) /* Bits 1:8 */
|
|
/* Chip Select On Timing */
|
|
#define EBC0_BNAP_CSN_ENCODE(n) ((((unsigned long)(n))&0x3)<<18) /* Bits 12:13 */
|
|
/* Output Enable On Timing */
|
|
#define EBC0_BNAP_OEN_ENCODE(n) ((((unsigned long)(n))&0x3)<<16) /* Bits 14:15 */
|
|
/* Write Back Enable On Timing */
|
|
#define EBC0_BNAP_WBN_ENCODE(n) ((((unsigned long)(n))&0x3)<<14) /* Bits 16:17 */
|
|
/* Write Back Enable Off Timing */
|
|
#define EBC0_BNAP_WBF_ENCODE(n) ((((unsigned long)(n))&0x3)<<12) /* Bits 18:19 */
|
|
/* Transfert Hold */
|
|
#define EBC0_BNAP_TH_ENCODE(n) ((((unsigned long)(n))&0x7)<<9) /* Bits 20:22 */
|
|
/* PerReady Enable */
|
|
#define EBC0_BNAP_RE_ENABLED 0x00000100
|
|
#define EBC0_BNAP_RE_DISABLED 0x00000000
|
|
/* Sample On Ready */
|
|
#define EBC0_BNAP_SOR_DELAYED 0x00000000
|
|
#define EBC0_BNAP_SOR_NOT_DELAYED 0x00000080
|
|
/* Byte Enable Mode */
|
|
#define EBC0_BNAP_BEM_WRITEONLY 0x00000000
|
|
#define EBC0_BNAP_BEM_RW 0x00000040
|
|
/* Parity Enable */
|
|
#define EBC0_BNAP_PEN_DISABLED 0x00000000
|
|
#define EBC0_BNAP_PEN_ENABLED 0x00000020
|
|
|
|
/*----------------------------------------------------------------------------+
|
|
| Define Boot devices
|
|
+----------------------------------------------------------------------------*/
|
|
/* */
|
|
#define BOOT_FROM_SMALL_FLASH 0x00
|
|
#define BOOT_FROM_LARGE_FLASH_OR_SRAM 0x01
|
|
#define BOOT_FROM_NAND_FLASH0 0x02
|
|
#define BOOT_FROM_PCI 0x03
|
|
#define BOOT_DEVICE_UNKNOWN 0x04
|
|
|
|
|
|
#define PVR_POWERPC_440EP_PASS1 0x42221850
|
|
#define PVR_POWERPC_440EP_PASS2 0x422218D3
|
|
|
|
#define TRUE 1
|
|
#define FALSE 0
|
|
|
|
#define GPIO0 0
|
|
#define GPIO1 1
|
|
|
|
/*#define MAX_SELECTION_NB CORE_NB */
|
|
#define MAX_CORE_SELECT_NB 22
|
|
|
|
/*----------------------------------------------------------------------------+
|
|
| PPC440EP GPIOs addresses.
|
|
+----------------------------------------------------------------------------*/
|
|
#define GPIO0_REAL 0xEF600B00
|
|
|
|
#define GPIO1_REAL 0xEF600C00
|
|
|
|
/* Offsets */
|
|
#define GPIOx_OR 0x00 /* GPIO Output Register */
|
|
#define GPIOx_TCR 0x04 /* GPIO Three-State Control Register */
|
|
#define GPIOx_OSL 0x08 /* GPIO Output Select Register (Bits 0-31) */
|
|
#define GPIOx_OSH 0x0C /* GPIO Ouput Select Register (Bits 32-63) */
|
|
#define GPIOx_TSL 0x10 /* GPIO Three-State Select Register (Bits 0-31) */
|
|
#define GPIOx_TSH 0x14 /* GPIO Three-State Select Register (Bits 32-63) */
|
|
#define GPIOx_ODR 0x18 /* GPIO Open drain Register */
|
|
#define GPIOx_IR 0x1C /* GPIO Input Register */
|
|
#define GPIOx_RR1 0x20 /* GPIO Receive Register 1 */
|
|
#define GPIOx_RR2 0x24 /* GPIO Receive Register 2 */
|
|
#define GPIOx_RR3 0x28 /* GPIO Receive Register 3 */
|
|
#define GPIOx_IS1L 0x30 /* GPIO Input Select Register 1 (Bits 0-31) */
|
|
#define GPIOx_IS1H 0x34 /* GPIO Input Select Register 1 (Bits 32-63) */
|
|
#define GPIOx_IS2L 0x38 /* GPIO Input Select Register 2 (Bits 0-31) */
|
|
#define GPIOx_IS2H 0x3C /* GPIO Input Select Register 2 (Bits 32-63) */
|
|
#define GPIOx_IS3L 0x40 /* GPIO Input Select Register 3 (Bits 0-31) */
|
|
#define GPIOx_IS3H 0x44 /* GPIO Input Select Register 3 (Bits 32-63) */
|
|
|
|
/* GPIO0 */
|
|
#define GPIO0_IS1L (GPIO0_BASE+GPIOx_IS1L)
|
|
#define GPIO0_IS1H (GPIO0_BASE+GPIOx_IS1H)
|
|
#define GPIO0_IS2L (GPIO0_BASE+GPIOx_IS2L)
|
|
#define GPIO0_IS2H (GPIO0_BASE+GPIOx_IS2H)
|
|
#define GPIO0_IS3L (GPIO0_BASE+GPIOx_IS3L)
|
|
#define GPIO0_IS3H (GPIO0_BASE+GPIOx_IS3L)
|
|
|
|
/* GPIO1 */
|
|
#define GPIO1_IS1L (GPIO1_BASE+GPIOx_IS1L)
|
|
#define GPIO1_IS1H (GPIO1_BASE+GPIOx_IS1H)
|
|
#define GPIO1_IS2L (GPIO1_BASE+GPIOx_IS2L)
|
|
#define GPIO1_IS2H (GPIO1_BASE+GPIOx_IS2H)
|
|
#define GPIO1_IS3L (GPIO1_BASE+GPIOx_IS3L)
|
|
#define GPIO1_IS3H (GPIO1_BASE+GPIOx_IS3L)
|
|
|
|
#define GPIO_OS(x) (x+GPIOx_OSL) /* GPIO Output Register High or Low */
|
|
#define GPIO_TS(x) (x+GPIOx_TSL) /* GPIO Three-state Control Reg High or Low */
|
|
#define GPIO_IS1(x) (x+GPIOx_IS1L) /* GPIO Input register1 High or Low */
|
|
#define GPIO_IS2(x) (x+GPIOx_IS2L) /* GPIO Input register2 High or Low */
|
|
#define GPIO_IS3(x) (x+GPIOx_IS3L) /* GPIO Input register3 High or Low */
|
|
|
|
|
|
/*----------------------------------------------------------------------------+
|
|
| XX XX
|
|
|
|
|
| XXXXXX XXX XX XXX XXX
|
|
| XX XX X XX XX XX
|
|
| XX XX X XX XX XX
|
|
| XX XX XX XX XX
|
|
| XXXXXX XXX XXX XXXX XXXX
|
|
+----------------------------------------------------------------------------*/
|
|
/*----------------------------------------------------------------------------+
|
|
| Defines
|
|
+----------------------------------------------------------------------------*/
|
|
typedef enum zmii_config { ZMII_CONFIGURATION_UNKNOWN,
|
|
ZMII_CONFIGURATION_IS_MII,
|
|
ZMII_CONFIGURATION_IS_RMII,
|
|
ZMII_CONFIGURATION_IS_SMII
|
|
} zmii_config_t;
|
|
|
|
/*----------------------------------------------------------------------------+
|
|
| Declare Configuration values
|
|
+----------------------------------------------------------------------------*/
|
|
typedef enum uart_config_nb { L1, L2, L3, L4 } uart_config_nb_t;
|
|
typedef enum core_selection { CORE_NOT_SELECTED, CORE_SELECTED} core_selection_t;
|
|
typedef enum config_list { IIC_CORE,
|
|
SCP_CORE,
|
|
DMA_CHANNEL_AB,
|
|
UIC_4_9,
|
|
USB2_HOST,
|
|
DMA_CHANNEL_CD,
|
|
USB2_DEVICE,
|
|
PACKET_REJ_FUNC_AVAIL,
|
|
USB1_DEVICE,
|
|
EBC_MASTER,
|
|
NAND_FLASH,
|
|
UART_CORE0,
|
|
UART_CORE1,
|
|
UART_CORE2,
|
|
UART_CORE3,
|
|
MII_SEL,
|
|
RMII_SEL,
|
|
SMII_SEL,
|
|
PACKET_REJ_FUNC_EN,
|
|
UIC_0_3,
|
|
USB1_HOST,
|
|
PCI_PATCH,
|
|
CORE_NB
|
|
} core_list_t;
|
|
|
|
typedef enum block3_value { B3_V1, B3_V2, B3_V3, B3_V4, B3_V5,
|
|
B3_V6, B3_V7, B3_V8, B3_V9, B3_V10,
|
|
B3_V11, B3_V12, B3_V13, B3_V14, B3_V15,
|
|
B3_V16, B3_VALUE_UNKNOWN
|
|
} block3_value_t;
|
|
|
|
typedef enum config_validity { CONFIG_IS_VALID,
|
|
CONFIG_IS_INVALID
|
|
} config_validity_t;
|