u-boot-brain/arch/arm/cpu/armv7/omap-common
Dmitry Lifshitz 87791adc22 arm: omap: reset sata on boot
On OMAP platforms (like OMAP5) Linux kernel fails to detect a SATA
device if it is used by U-Boot.

It happens because U-Boot does not reset SATA controller before boot.

Reset the controller on OS boot so that Linux will have a clean state
to work with.

Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Reviewed-by: Tom Rini <trini@ti.com>
2015-01-05 15:13:47 -05:00
..
abb.c replace DIV_ROUND with DIV_ROUND_CLOSEST 2014-11-20 11:28:25 -05:00
boot-common.c arm: omap: reset sata on boot 2015-01-05 15:13:47 -05:00
clocks-common.c ARM: OMAP4/5: Remove dead code against CONFIG_SYS_CLOCKS_ENABLE_ALL 2014-01-24 09:34:22 -05:00
emif-common.c arm: omap-common: emif: allow to map memory without interleaving 2014-12-04 11:04:13 -05:00
hwinit-common.c ARM: DRA: Enable VTT regulator 2014-08-25 10:48:13 -04:00
lowlevel_init.S Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
Makefile am33xx/omap: Allow cache enable for all Sitara/OMAP 2014-06-11 16:25:39 -04:00
mem-common.c ARM: omap: clean redundant PISMO_xx macros used in OMAP3 2014-07-25 16:26:12 -04:00
omap-cache.c am33xx/omap: Allow cache enable for all Sitara/OMAP 2014-06-11 16:25:39 -04:00
pipe3-phy.c ARM: OMAP5: Add Pipe3 PHY driver 2013-12-04 08:12:08 -05:00
pipe3-phy.h ARM: OMAP5: Add Pipe3 PHY driver 2013-12-04 08:12:08 -05:00
reset.c Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
sata.c OMAP5+: sata/scsi: implement scsi_bus_reset() 2015-01-05 15:13:46 -05:00
timer.c omap-common/hwinit-common.c: timer_init() doesn't need to touch gd 2015-01-05 15:13:45 -05:00
u-boot-spl.lds arm: Add missing .vectors section to linker scripts 2014-08-30 07:46:41 -04:00
utils.c OMAP: common: consolidate fake USB ethernet MAC address creation 2014-04-17 14:39:54 -04:00
vc.c ARM: OMAP4+: pmic: Make generic bus init and write functions 2013-06-10 08:43:09 -04:00