mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-23 18:38:51 +09:00
![Simon Glass](/assets/img/avatar_default.png)
This function can fail if the device tree runs out of space. Rather than silently booting with an incomplete device tree, allow the failure to be detected. Unfortunately this involves changing a lot of places in the code. I have not changed behvaiour to return an error where one is not currently returned, to avoid unexpected breakage. Eventually it would be nice to allow boards to register functions to be called to update the device tree. This would avoid all the many functions to do this. However it's not clear yet if this should be done using driver model or with a linker list. This work is left for later. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
428 lines
11 KiB
C
428 lines
11 KiB
C
/*
|
|
* (C) Copyright 2005
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <ioports.h>
|
|
#include <mpc83xx.h>
|
|
#include <asm/mpc8349_pci.h>
|
|
#include <i2c.h>
|
|
#include <miiphy.h>
|
|
#include <asm/mmu.h>
|
|
#include <pci.h>
|
|
#include <flash.h>
|
|
#include <mtd/cfi_flash.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define IOSYNC asm("eieio")
|
|
#define ISYNC asm("isync")
|
|
#define SYNC asm("sync")
|
|
#define FPW FLASH_PORT_WIDTH
|
|
#define FPWV FLASH_PORT_WIDTHV
|
|
|
|
#define DDR_MAX_SIZE_PER_CS 0x20000000
|
|
|
|
#if defined(DDR_CASLAT_20)
|
|
#define TIMING_CASLAT TIMING_CFG1_CASLAT_20
|
|
#define MODE_CASLAT DDR_MODE_CASLAT_20
|
|
#else
|
|
#define TIMING_CASLAT TIMING_CFG1_CASLAT_25
|
|
#define MODE_CASLAT DDR_MODE_CASLAT_25
|
|
#endif
|
|
|
|
#define INITIAL_CS_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_12 | \
|
|
CSCONFIG_COL_BIT_9)
|
|
|
|
/* External definitions */
|
|
ulong flash_get_size (ulong base, int banknum);
|
|
|
|
/* Local functions */
|
|
static int detect_num_flash_banks(void);
|
|
static long int get_ddr_bank_size(short cs, long *base);
|
|
static void set_cs_bounds(short cs, long base, long size);
|
|
static void set_cs_config(short cs, long config);
|
|
static void set_ddr_config(void);
|
|
|
|
/* Local variable */
|
|
static volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
|
|
|
|
/**************************************************************************
|
|
* Board initialzation after relocation to RAM. Used to detect the number
|
|
* of Flash banks on TQM834x.
|
|
*/
|
|
int board_early_init_r (void) {
|
|
/* sanity check, IMMARBAR should be mirrored at offset zero of IMMR */
|
|
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
|
|
return 0;
|
|
|
|
/* detect the number of Flash banks */
|
|
return detect_num_flash_banks();
|
|
}
|
|
|
|
/**************************************************************************
|
|
* DRAM initalization and size detection
|
|
*/
|
|
phys_size_t initdram (int board_type)
|
|
{
|
|
long bank_size;
|
|
long size;
|
|
int cs;
|
|
|
|
/* during size detection, set up the max DDRLAW size */
|
|
im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE;
|
|
im->sysconf.ddrlaw[0].ar = (LAWAR_EN | LAWAR_SIZE_2G);
|
|
|
|
/* set CS bounds to maximum size */
|
|
for(cs = 0; cs < 4; ++cs) {
|
|
set_cs_bounds(cs,
|
|
CONFIG_SYS_DDR_BASE + (cs * DDR_MAX_SIZE_PER_CS),
|
|
DDR_MAX_SIZE_PER_CS);
|
|
|
|
set_cs_config(cs, INITIAL_CS_CONFIG);
|
|
}
|
|
|
|
/* configure ddr controller */
|
|
set_ddr_config();
|
|
|
|
udelay(200);
|
|
|
|
/* enable DDR controller */
|
|
im->ddr.sdram_cfg = (SDRAM_CFG_MEM_EN |
|
|
SDRAM_CFG_SREN |
|
|
SDRAM_CFG_SDRAM_TYPE_DDR1);
|
|
SYNC;
|
|
|
|
/* size detection */
|
|
debug("\n");
|
|
size = 0;
|
|
for(cs = 0; cs < 4; ++cs) {
|
|
debug("\nDetecting Bank%d\n", cs);
|
|
|
|
bank_size = get_ddr_bank_size(cs,
|
|
(long *)(CONFIG_SYS_DDR_BASE + size));
|
|
size += bank_size;
|
|
|
|
debug("DDR Bank%d size: %ld MiB\n\n", cs, bank_size >> 20);
|
|
|
|
/* exit if less than one bank */
|
|
if(size < DDR_MAX_SIZE_PER_CS) break;
|
|
}
|
|
|
|
return size;
|
|
}
|
|
|
|
/**************************************************************************
|
|
* checkboard()
|
|
*/
|
|
int checkboard (void)
|
|
{
|
|
puts("Board: TQM834x\n");
|
|
|
|
#ifdef CONFIG_PCI
|
|
volatile immap_t * immr;
|
|
u32 w, f;
|
|
|
|
immr = (immap_t *)CONFIG_SYS_IMMR;
|
|
if (!(immr->reset.rcwh & HRCWH_PCI_HOST)) {
|
|
printf("PCI: NOT in host mode..?!\n");
|
|
return 0;
|
|
}
|
|
|
|
/* get bus width */
|
|
w = 32;
|
|
if (immr->reset.rcwh & HRCWH_64_BIT_PCI)
|
|
w = 64;
|
|
|
|
/* get clock */
|
|
f = gd->pci_clk;
|
|
|
|
printf("PCI1: %d bit, %d MHz\n", w, f / 1000000);
|
|
#else
|
|
printf("PCI: disabled\n");
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
|
|
/**************************************************************************
|
|
*
|
|
* Local functions
|
|
*
|
|
*************************************************************************/
|
|
|
|
/**************************************************************************
|
|
* Detect the number of flash banks (1 or 2). Store it in
|
|
* a global variable tqm834x_num_flash_banks.
|
|
* Bank detection code based on the Monitor code.
|
|
*/
|
|
static int detect_num_flash_banks(void)
|
|
{
|
|
typedef unsigned long FLASH_PORT_WIDTH;
|
|
typedef volatile unsigned long FLASH_PORT_WIDTHV;
|
|
FPWV *bank1_base;
|
|
FPWV *bank2_base;
|
|
FPW bank1_read;
|
|
FPW bank2_read;
|
|
ulong bank1_size;
|
|
ulong bank2_size;
|
|
ulong total_size;
|
|
|
|
cfi_flash_num_flash_banks = 2; /* assume two banks */
|
|
|
|
/* Get bank 1 and 2 information */
|
|
bank1_size = flash_get_size(CONFIG_SYS_FLASH_BASE, 0);
|
|
debug("Bank1 size: %lu\n", bank1_size);
|
|
bank2_size = flash_get_size(CONFIG_SYS_FLASH_BASE + bank1_size, 1);
|
|
debug("Bank2 size: %lu\n", bank2_size);
|
|
total_size = bank1_size + bank2_size;
|
|
|
|
if (bank2_size > 0) {
|
|
/* Seems like we've got bank 2, but maybe it's mirrored 1 */
|
|
|
|
/* Set the base addresses */
|
|
bank1_base = (FPWV *) (CONFIG_SYS_FLASH_BASE);
|
|
bank2_base = (FPWV *) (CONFIG_SYS_FLASH_BASE + bank1_size);
|
|
|
|
/* Put bank 2 into CFI command mode and read */
|
|
bank2_base[0x55] = 0x00980098;
|
|
IOSYNC;
|
|
ISYNC;
|
|
bank2_read = bank2_base[0x10];
|
|
|
|
/* Read from bank 1 (it's in read mode) */
|
|
bank1_read = bank1_base[0x10];
|
|
|
|
/* Reset Flash */
|
|
bank1_base[0] = 0x00F000F0;
|
|
bank2_base[0] = 0x00F000F0;
|
|
|
|
if (bank2_read == bank1_read) {
|
|
/*
|
|
* Looks like just one bank, but not sure yet. Let's
|
|
* read from bank 2 in autosoelect mode.
|
|
*/
|
|
bank2_base[0x0555] = 0x00AA00AA;
|
|
bank2_base[0x02AA] = 0x00550055;
|
|
bank2_base[0x0555] = 0x00900090;
|
|
IOSYNC;
|
|
ISYNC;
|
|
bank2_read = bank2_base[0x10];
|
|
|
|
/* Read from bank 1 (it's in read mode) */
|
|
bank1_read = bank1_base[0x10];
|
|
|
|
/* Reset Flash */
|
|
bank1_base[0] = 0x00F000F0;
|
|
bank2_base[0] = 0x00F000F0;
|
|
|
|
if (bank2_read == bank1_read) {
|
|
/*
|
|
* In both CFI command and autoselect modes,
|
|
* we got the some data reading from Flash.
|
|
* There is only one mirrored bank.
|
|
*/
|
|
cfi_flash_num_flash_banks = 1;
|
|
total_size = bank1_size;
|
|
}
|
|
}
|
|
}
|
|
|
|
debug("Number of flash banks detected: %d\n", cfi_flash_num_flash_banks);
|
|
|
|
/* set OR0 and BR0 */
|
|
set_lbc_or(0, CONFIG_SYS_OR_TIMING_FLASH |
|
|
(-(total_size) & OR_GPCM_AM));
|
|
set_lbc_br(0, (CONFIG_SYS_FLASH_BASE & BR_BA) |
|
|
(BR_MS_GPCM | BR_PS_32 | BR_V));
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*************************************************************************
|
|
* Detect the size of a ddr bank. Sets CS bounds and CS config accordingly.
|
|
*/
|
|
static long int get_ddr_bank_size(short cs, long *base)
|
|
{
|
|
/* This array lists all valid DDR SDRAM configurations, with
|
|
* Bank sizes in bytes. (Refer to Table 9-27 in the MPC8349E RM).
|
|
* The last entry has to to have size equal 0 and is igonred during
|
|
* autodection. Bank sizes must be in increasing order of size
|
|
*/
|
|
struct {
|
|
long row;
|
|
long col;
|
|
long size;
|
|
} conf[] = {
|
|
{CSCONFIG_ROW_BIT_12, CSCONFIG_COL_BIT_8, 32 << 20},
|
|
{CSCONFIG_ROW_BIT_12, CSCONFIG_COL_BIT_9, 64 << 20},
|
|
{CSCONFIG_ROW_BIT_12, CSCONFIG_COL_BIT_10, 128 << 20},
|
|
{CSCONFIG_ROW_BIT_13, CSCONFIG_COL_BIT_9, 128 << 20},
|
|
{CSCONFIG_ROW_BIT_13, CSCONFIG_COL_BIT_10, 256 << 20},
|
|
{CSCONFIG_ROW_BIT_13, CSCONFIG_COL_BIT_11, 512 << 20},
|
|
{CSCONFIG_ROW_BIT_14, CSCONFIG_COL_BIT_10, 512 << 20},
|
|
{CSCONFIG_ROW_BIT_14, CSCONFIG_COL_BIT_11, 1024 << 20},
|
|
{0, 0, 0}
|
|
};
|
|
|
|
int i;
|
|
int detected;
|
|
long size;
|
|
|
|
detected = -1;
|
|
for(i = 0; conf[i].size != 0; ++i) {
|
|
|
|
/* set sdram bank configuration */
|
|
set_cs_config(cs, CSCONFIG_EN | conf[i].col | conf[i].row);
|
|
|
|
debug("Getting RAM size...\n");
|
|
size = get_ram_size(base, DDR_MAX_SIZE_PER_CS);
|
|
|
|
if((size == conf[i].size) && (i == detected + 1))
|
|
detected = i;
|
|
|
|
debug("Trying %ld x %ld (%ld MiB) at addr %p, detected: %ld MiB\n",
|
|
conf[i].row,
|
|
conf[i].col,
|
|
conf[i].size >> 20,
|
|
base,
|
|
size >> 20);
|
|
}
|
|
|
|
if(detected == -1){
|
|
/* disable empty cs */
|
|
debug("\nNo valid configurations for CS%d, disabling...\n", cs);
|
|
set_cs_config(cs, 0);
|
|
return 0;
|
|
}
|
|
|
|
debug("\nDetected configuration %ld x %ld (%ld MiB) at addr %p\n",
|
|
conf[detected].row, conf[detected].col, conf[detected].size >> 20, base);
|
|
|
|
/* configure cs ro detected params */
|
|
set_cs_config(cs, CSCONFIG_EN | conf[detected].row |
|
|
conf[detected].col);
|
|
|
|
set_cs_bounds(cs, (long)base, conf[detected].size);
|
|
|
|
return(conf[detected].size);
|
|
}
|
|
|
|
/**************************************************************************
|
|
* Sets DDR bank CS bounds.
|
|
*/
|
|
static void set_cs_bounds(short cs, long base, long size)
|
|
{
|
|
debug("Setting bounds %08lx, %08lx for cs %d\n", base, size, cs);
|
|
if(size == 0){
|
|
im->ddr.csbnds[cs].csbnds = 0x00000000;
|
|
} else {
|
|
im->ddr.csbnds[cs].csbnds =
|
|
((base >> CSBNDS_SA_SHIFT) & CSBNDS_SA) |
|
|
(((base + size - 1) >> CSBNDS_EA_SHIFT) &
|
|
CSBNDS_EA);
|
|
}
|
|
SYNC;
|
|
}
|
|
|
|
/**************************************************************************
|
|
* Sets DDR banks CS configuration.
|
|
* config == 0x00000000 disables the CS.
|
|
*/
|
|
static void set_cs_config(short cs, long config)
|
|
{
|
|
debug("Setting config %08lx for cs %d\n", config, cs);
|
|
im->ddr.cs_config[cs] = config;
|
|
SYNC;
|
|
}
|
|
|
|
/**************************************************************************
|
|
* Sets DDR clocks, timings and configuration.
|
|
*/
|
|
static void set_ddr_config(void) {
|
|
/* clock control */
|
|
im->ddr.sdram_clk_cntl = DDR_SDRAM_CLK_CNTL_SS_EN |
|
|
DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05;
|
|
SYNC;
|
|
|
|
/* timing configuration */
|
|
im->ddr.timing_cfg_1 =
|
|
(4 << TIMING_CFG1_PRETOACT_SHIFT) |
|
|
(7 << TIMING_CFG1_ACTTOPRE_SHIFT) |
|
|
(4 << TIMING_CFG1_ACTTORW_SHIFT) |
|
|
(5 << TIMING_CFG1_REFREC_SHIFT) |
|
|
(3 << TIMING_CFG1_WRREC_SHIFT) |
|
|
(3 << TIMING_CFG1_ACTTOACT_SHIFT) |
|
|
(1 << TIMING_CFG1_WRTORD_SHIFT) |
|
|
(TIMING_CFG1_CASLAT & TIMING_CASLAT);
|
|
|
|
im->ddr.timing_cfg_2 =
|
|
TIMING_CFG2_CPO_DEF |
|
|
(2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT);
|
|
SYNC;
|
|
|
|
/* don't enable DDR controller yet */
|
|
im->ddr.sdram_cfg =
|
|
SDRAM_CFG_SREN |
|
|
SDRAM_CFG_SDRAM_TYPE_DDR1;
|
|
SYNC;
|
|
|
|
/* Set SDRAM mode */
|
|
im->ddr.sdram_mode =
|
|
((DDR_MODE_EXT_MODEREG | DDR_MODE_WEAK) <<
|
|
SDRAM_MODE_ESD_SHIFT) |
|
|
((DDR_MODE_MODEREG | DDR_MODE_BLEN_4) <<
|
|
SDRAM_MODE_SD_SHIFT) |
|
|
((DDR_MODE_CASLAT << SDRAM_MODE_SD_SHIFT) &
|
|
MODE_CASLAT);
|
|
SYNC;
|
|
|
|
/* Set fast SDRAM refresh rate */
|
|
im->ddr.sdram_interval =
|
|
(DDR_REFINT_166MHZ_7US << SDRAM_INTERVAL_REFINT_SHIFT) |
|
|
(DDR_BSTOPRE << SDRAM_INTERVAL_BSTOPRE_SHIFT);
|
|
SYNC;
|
|
|
|
/* Workaround for DDR6 Erratum
|
|
* see MPC8349E Device Errata Rev.8, 2/2006
|
|
* This workaround influences the MPC internal "input enables"
|
|
* dependent on CAS latency and MPC revision. According to errata
|
|
* sheet the internal reserved registers for this workaround are
|
|
* not available from revision 2.0 and up.
|
|
*/
|
|
|
|
/* Get REVID from register SPRIDR. Skip workaround if rev >= 2.0
|
|
* (0x200)
|
|
*/
|
|
if ((im->sysconf.spridr & SPRIDR_REVID) < 0x200) {
|
|
|
|
/* There is a internal reserved register at IMMRBAR+0x2F00
|
|
* which has to be written with a certain value defined by
|
|
* errata sheet.
|
|
*/
|
|
u32 *reserved_p = (u32 *)((u8 *)im + 0x2f00);
|
|
|
|
#if defined(DDR_CASLAT_20)
|
|
*reserved_p = 0x201c0000;
|
|
#else
|
|
*reserved_p = 0x202c0000;
|
|
#endif
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_OF_BOARD_SETUP
|
|
int ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
ft_cpu_setup(blob, bd);
|
|
|
|
#ifdef CONFIG_PCI
|
|
ft_pci_setup(blob, bd);
|
|
#endif /* CONFIG_PCI */
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_OF_BOARD_SETUP */
|