mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-17 07:28:51 +09:00
![]() This commit adds initial support for the Toradex Colibri iMX8QXP 2GB WB IT V1.0B module. Unlike the V1.0A early access samples exclusively booting from SD card, they are now strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports either booting from the on-module eMMC or may be used for recovery purpose using the universal update utility (uuu) aka mfgtools 3.0. Functionality wise the following is known to be working: - eMMC and MMC/SD card - Ethernet - GPIOs - I2C Unfortunately, there is no USB functionality for the i.MX 8QXP as of yet. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com> |
||
---|---|---|
.. | ||
colibri-imx8qxp-imximage.cfg | ||
colibri-imx8x.c | ||
Kconfig | ||
MAINTAINERS | ||
Makefile | ||
README |
U-Boot for the Toradex Colibri iMX8QXP V1.0B Module Quick Start =========== - Build the ARM trusted firmware binary - Get scfw_tcm.bin and ahab-container.img - Build U-Boot - Load U-Boot binary using uuu - Flash U-Boot binary into the eMMC - Boot Get and Build the ARM Trusted Firmware ====================================== $ git clone -b imx_4.14.78_1.0.0_ga https://source.codeaurora.org/external/imx/imx-atf $ cd imx-atf/ $ make PLAT=imx8qxp bl31 Get scfw_tcm.bin and ahab-container.img ======================================= $ wget https://github.com/toradex/meta-fsl-bsp-release/blob/toradex-sumo-4.14.78-1.0.0_ga-bringup/imx/meta-bsp/recipes-bsp/imx-sc-firmware/files/mx8qx-colibri-scfw-tcm.bin?raw=true $ mv mx8qx-colibri-scfw-tcm.bin\?raw\=true mx8qx-colibri-scfw-tcm.bin $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin $ chmod +x firmware-imx-8.0.bin $ ./firmware-imx-8.0.bin Copy the following binaries to the U-Boot folder: $ cp imx-atf/build/imx8qxp/release/bl31.bin . $ cp u-boot/u-boot.bin . Copy the following firmware to the U-Boot folder: $ cp firmware-imx-8.0/firmware/seco/ahab-container.img . Build U-Boot ============ $ make colibri-imx8qxp_defconfig $ make u-boot-dtb.imx Load the U-Boot Binary Using UUU ================================ Get the latest version of the universal update utility (uuu) aka mfgtools 3.0: https://community.nxp.com/external-link.jspa?url=https%3A%2F%2Fgithub.com%2FNXPmicro%2Fmfgtools%2Freleases Put the module into USB recovery aka serial downloader mode, connect USB device to your host and execute uuu: sudo ./uuu u-boot/u-boot-dtb.imx Flash the U-Boot Binary into the eMMC ===================================== Burn the u-boot-dtb.imx binary to the primary eMMC hardware boot area partition: load mmc 1:1 $loadaddr u-boot-dtb.imx setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200 mmc dev 0 1 mmc write ${loadaddr} 0x0 ${blkcnt} Boot