mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-17 07:28:51 +09:00
![]() If SW 8 pins 0 and 1 indicate that NAND should be enabled then the pins pinmux must be reconfigured for NAND mode. Therefore, enable NAND by reconfiguring the pinmux. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> |
||
---|---|---|
.. | ||
evm.c | ||
Kconfig | ||
MAINTAINERS | ||
Makefile | ||
mux_data.h | ||
README |
Summary ======= This document covers various features of the 'dra7xx_evm' build and some related uses. eMMC boot partition use ======================= It is possible, depending on SYSBOOT configuration to boot from the eMMC boot partitions using (name depending on documentation referenced) Alternative Boot operation mode or Boot Sequence Option 1/2. In this example we load MLO and u-boot.img from the build into DDR and then use 'mmc bootbus' to set the required rate (see TRM) and 'mmc partconfig' to set boot0 as the boot device. U-Boot # setenv autoload no U-Boot # usb start U-Boot # dhcp U-Boot # mmc dev 1 1 U-Boot # tftp ${loadaddr} dra7xx/MLO U-Boot # mmc write ${loadaddr} 0 100 U-Boot # tftp ${loadaddr} dra7xx/u-boot.img U-Boot # mmc write ${loadaddr} 300 400 U-Boot # mmc bootbus 1 2 0 2 U-Boot # mmc partconf 1 1 1 0 U-Boot # mmc rst-function 1 1