mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-27 04:18:51 +09:00
![Niel Fourie](/assets/img/avatar_default.png)
Add Phytec Mira device tree files, for use with pcm058. >From Linux 5.6, commit 7111951b8d49 upstream Signed-off-by: Niel Fourie <lusus@denx.de> Cc: Stefano Babic <sbabic@denx.de>
391 lines
7.8 KiB
Plaintext
391 lines
7.8 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (C) 2018 PHYTEC Messtechnik GmbH
|
|
* Author: Christian Hemp <c.hemp@phytec.de>
|
|
*/
|
|
|
|
|
|
/ {
|
|
aliases {
|
|
rtc0 = &i2c_rtc;
|
|
};
|
|
|
|
backlight: backlight {
|
|
compatible = "pwm-backlight";
|
|
brightness-levels = <0 4 8 16 32 64 128 255>;
|
|
default-brightness-level = <7>;
|
|
power-supply = <®_backlight>;
|
|
pwms = <&pwm1 0 5000000>;
|
|
status = "okay";
|
|
};
|
|
|
|
gpio_leds: leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_gpioleds>;
|
|
status = "disabled";
|
|
|
|
red {
|
|
label = "phyboard-mira:red";
|
|
gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
green {
|
|
label = "phyboard-mira:green";
|
|
gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
blue {
|
|
label = "phyboard-mira:blue";
|
|
gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "mmc0";
|
|
};
|
|
};
|
|
|
|
reg_backlight: regulator-backlight {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "backlight_3v3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_en_switch: regulator-en-switch {
|
|
compatible = "regulator-fixed";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_en_switch>;
|
|
regulator-name = "Enable Switch";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
enable-active-high;
|
|
gpio = <&gpio3 4 GPIO_ACTIVE_HIGH>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_flexcan1: regulator-flexcan1 {
|
|
compatible = "regulator-fixed";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_flexcan1_en>;
|
|
regulator-name = "flexcan1-reg";
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
reg_panel: regulator-panel {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "panel-power-supply";
|
|
regulator-min-microvolt = <12000000>;
|
|
regulator-max-microvolt = <12000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_pcie: regulator-pcie {
|
|
compatible = "regulator-fixed";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pcie_reg>;
|
|
regulator-name = "mPCIe_1V5";
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
gpio = <&gpio3 0 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
reg_usb_h1_vbus: usb-h1-vbus {
|
|
compatible = "regulator-fixed";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usbh1_vbus>;
|
|
regulator-name = "usb_h1_vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpio2 18 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
reg_usbotg_vbus: usbotg-vbus {
|
|
compatible = "regulator-fixed";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usbotg_vbus>;
|
|
regulator-name = "usb_otg_vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
panel {
|
|
compatible = "auo,g104sn02";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_panel_en>;
|
|
power-supply = <®_panel>;
|
|
enable-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
|
|
backlight = <&backlight>;
|
|
|
|
port {
|
|
panel_in: endpoint {
|
|
remote-endpoint = <&lvds0_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&can1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_flexcan1>;
|
|
xceiver-supply = <®_flexcan1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&hdmi {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_hdmicec>;
|
|
ddc-i2c-bus = <&i2c2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&i2c1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
|
clock-frequency = <400000>;
|
|
status = "disabled";
|
|
|
|
stmpe: touchctrl@44 {
|
|
compatible = "st,stmpe811";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_stmpe>;
|
|
reg = <0x44>;
|
|
interrupt-parent = <&gpio7>;
|
|
interrupts = <12 IRQ_TYPE_NONE>;
|
|
status = "disabled";
|
|
|
|
stmpe_touchscreen {
|
|
compatible = "st,stmpe-ts";
|
|
st,sample-time = <4>;
|
|
st,mod-12b = <1>;
|
|
st,ref-sel = <0>;
|
|
st,adc-freq = <1>;
|
|
st,ave-ctrl = <1>;
|
|
st,touch-det-delay = <2>;
|
|
st,settling = <2>;
|
|
st,fraction-z = <7>;
|
|
st,i-drive = <1>;
|
|
};
|
|
};
|
|
|
|
i2c_rtc: rtc@68 {
|
|
compatible = "microcrystal,rv4162";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_rtc_int>;
|
|
reg = <0x68>;
|
|
interrupt-parent = <&gpio7>;
|
|
interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c2>;
|
|
clock-frequency = <100000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&ldb {
|
|
status = "okay";
|
|
|
|
lvds-channel@0 {
|
|
fsl,data-mapping = "spwg";
|
|
fsl,data-width = <24>;
|
|
status = "disabled";
|
|
|
|
port@4 {
|
|
reg = <4>;
|
|
|
|
lvds0_out: endpoint {
|
|
remote-endpoint = <&panel_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&pcie {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pcie>;
|
|
reset-gpio = <&gpio2 25 GPIO_ACTIVE_LOW>;
|
|
vpcie-supply = <®_pcie>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&pwm1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pwm1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart3>;
|
|
uart-has-rtscts;
|
|
status = "disabled";
|
|
};
|
|
|
|
&usbh1 {
|
|
vbus-supply = <®_usb_h1_vbus>;
|
|
disable-over-current;
|
|
status = "disabled";
|
|
};
|
|
|
|
&usbotg {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usbotg>;
|
|
vbus-supply = <®_usbotg_vbus>;
|
|
disable-over-current;
|
|
status = "disabled";
|
|
};
|
|
|
|
&usdhc1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usdhc1>;
|
|
cd-gpios = <&gpio6 31 GPIO_ACTIVE_LOW>;
|
|
no-1-8-v;
|
|
status = "disabled";
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl_panel_en: panelen1grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0xb0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_en_switch: enswitchgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0xb0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_flexcan1: flexcan1grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0
|
|
MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_flexcan1_en: flexcan1engrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_A18__GPIO2_IO20 0xb0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_gpioleds: gpioledsgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22 0x1b0b0
|
|
MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x1b0b0
|
|
MX6QDL_PAD_CSI0_DAT6__GPIO5_IO24 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_hdmicec: hdmicecgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c2: i2c2grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
|
|
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c1: i2c1grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
|
|
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_pcie: pciegrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_OE__GPIO2_IO25 0xb0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_pcie_reg: pciereggrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0xb0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_pwm1: pwm1grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_rtc_int: rtcintgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_stmpe: stmpegrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart2: uart2grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
|
|
MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart3: uart3grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_EB3__UART3_CTS_B 0x1b0b1
|
|
MX6QDL_PAD_EIM_D23__UART3_RTS_B 0x1b0b1
|
|
MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
|
|
MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_usbh1_vbus: usbh1vbusgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_A20__GPIO2_IO18 0xb0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_usbotg: usbotggrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
|
|
>;
|
|
};
|
|
|
|
pinctrl_usbotg_vbus: usbotgvbusgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_A19__GPIO2_IO19 0xb0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc1: usdhc1grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9
|
|
MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9
|
|
MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9
|
|
MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9
|
|
MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9
|
|
MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9
|
|
MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0xb0b1 /* CD */
|
|
>;
|
|
};
|
|
};
|