mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-09-06 21:03:21 +09:00
![Patrice Chotard](/assets/img/avatar_default.png)
This DT file comes from kernel v4.15, this board offers : _ STM32F429NIH6 microcontroller _ 4.3” color TFT LCD with resistive touchscreen (480 x 272 pixels) _ Six 5 V power supply options: Power jack ST-LINK/V2 USB connector User USB HS connector User USB FS1 connector User USB FS2 connector Daughterboard _ SAI Audio DAC, stereo audio jack which supports headset with microphone _ Stereo digital microphone, audio terminal connector used to connect external speakers _ 2 GBytes (or more) SDIO interface MicroSD card _ RF EEPROM on I2 C compatible serial interface _ RS-232 communication _ IrDA transceiver _ JTAG/SWD and ETM trace debug support, ST-LINK/V2 embedded _ IEEE-802.3-2002 compliant Ethernet connector _ Camera module _ 8M x 32-bit SDRAM, 1M x 16-bit SRAM and 8M x 16-bit NOR Flash _ Joystick with 4-directional control and selector _ Reset, Wakeup and Tamper buttons _ 4 color user LEDs _ Extension connectors & memory connectors for daughterboard or wrapping board _ USB OTG HS and FS with Micro-AB connectors _ RTC with backup battery _ CAN2.0A/B compliant connection _ Potentiometer _ Motor control connector Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
277 lines
4.5 KiB
Plaintext
277 lines
4.5 KiB
Plaintext
/*
|
|
* Copyright (C) 2015, STMicroelectronics - All Rights Reserved
|
|
* Author: Maxime Coquelin <mcoquelin.stm32@gmail.com> for STMicroelectronics.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "stm32f429.dtsi"
|
|
#include "stm32f429-pinctrl.dtsi"
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/ {
|
|
model = "STMicroelectronics STM32429i-EVAL board";
|
|
compatible = "st,stm32429i-eval", "st,stm32f429";
|
|
|
|
chosen {
|
|
bootargs = "root=/dev/ram";
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
memory {
|
|
reg = <0x00000000 0x2000000>;
|
|
};
|
|
|
|
aliases {
|
|
serial0 = &usart1;
|
|
};
|
|
|
|
clocks {
|
|
clk_ext_camera: clk-ext-camera {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <24000000>;
|
|
};
|
|
};
|
|
|
|
soc {
|
|
dma-ranges = <0xc0000000 0x0 0x10000000>;
|
|
};
|
|
|
|
regulators {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
reg_vref: regulator@0 {
|
|
compatible = "regulator-fixed";
|
|
reg = <0>;
|
|
regulator-name = "vref";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
green {
|
|
gpios = <&gpiog 6 1>;
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
orange {
|
|
gpios = <&gpiog 7 1>;
|
|
};
|
|
red {
|
|
gpios = <&gpiog 10 1>;
|
|
};
|
|
blue {
|
|
gpios = <&gpiog 12 1>;
|
|
};
|
|
};
|
|
|
|
gpio_keys {
|
|
compatible = "gpio-keys";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
autorepeat;
|
|
button@0 {
|
|
label = "Wake up";
|
|
linux,code = <KEY_WAKEUP>;
|
|
gpios = <&gpioa 0 0>;
|
|
};
|
|
button@1 {
|
|
label = "Tamper";
|
|
linux,code = <KEY_RESTART>;
|
|
gpios = <&gpioc 13 0>;
|
|
};
|
|
};
|
|
|
|
usbotg_hs_phy: usbphy {
|
|
#phy-cells = <0>;
|
|
compatible = "usb-nop-xceiv";
|
|
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(OTGHSULPI)>;
|
|
clock-names = "main_clk";
|
|
};
|
|
|
|
panel_rgb: panel-rgb {
|
|
compatible = "ampire,am-480272h3tmqw-t01h";
|
|
status = "okay";
|
|
port {
|
|
panel_in_rgb: endpoint {
|
|
remote-endpoint = <<dc_out_rgb>;
|
|
};
|
|
};
|
|
};
|
|
|
|
mmc_vcard: mmc_vcard {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "mmc_vcard";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
&adc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&adc3_in8_pin>;
|
|
vref-supply = <®_vref>;
|
|
status = "okay";
|
|
adc3: adc@200 {
|
|
st,adc-channels = <8>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&clk_hse {
|
|
clock-frequency = <25000000>;
|
|
};
|
|
|
|
&crc {
|
|
status = "okay";
|
|
};
|
|
|
|
&dcmi {
|
|
status = "okay";
|
|
|
|
port {
|
|
dcmi_0: endpoint {
|
|
remote-endpoint = <&ov2640_0>;
|
|
bus-width = <8>;
|
|
hsync-active = <0>;
|
|
vsync-active = <0>;
|
|
pclk-sample = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
pinctrl-0 = <&i2c1_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
|
|
ov2640: camera@30 {
|
|
compatible = "ovti,ov2640";
|
|
reg = <0x30>;
|
|
resetb-gpios = <&stmpegpio 2 GPIO_ACTIVE_HIGH>;
|
|
pwdn-gpios = <&stmpegpio 0 GPIO_ACTIVE_LOW>;
|
|
clocks = <&clk_ext_camera>;
|
|
clock-names = "xvclk";
|
|
status = "okay";
|
|
|
|
port {
|
|
ov2640_0: endpoint {
|
|
remote-endpoint = <&dcmi_0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
stmpe1600: stmpe1600@42 {
|
|
compatible = "st,stmpe1600";
|
|
reg = <0x42>;
|
|
interrupts = <8 3>;
|
|
interrupt-parent = <&gpioi>;
|
|
interrupt-controller;
|
|
wakeup-source;
|
|
|
|
stmpegpio: stmpe_gpio {
|
|
compatible = "st,stmpe-gpio";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&iwdg {
|
|
status = "okay";
|
|
timeout-sec = <32>;
|
|
};
|
|
|
|
<dc {
|
|
status = "okay";
|
|
pinctrl-0 = <<dc_pins>;
|
|
pinctrl-names = "default";
|
|
dma-ranges;
|
|
|
|
port {
|
|
ltdc_out_rgb: endpoint {
|
|
remote-endpoint = <&panel_in_rgb>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&mac {
|
|
status = "okay";
|
|
pinctrl-0 = <ðernet_mii>;
|
|
pinctrl-names = "default";
|
|
phy-mode = "mii";
|
|
phy-handle = <&phy1>;
|
|
mdio0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "snps,dwmac-mdio";
|
|
phy1: ethernet-phy@1 {
|
|
reg = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&rtc {
|
|
status = "okay";
|
|
};
|
|
|
|
&sdio {
|
|
status = "okay";
|
|
vmmc-supply = <&mmc_vcard>;
|
|
cd-gpios = <&stmpegpio 15 GPIO_ACTIVE_HIGH>;
|
|
cd-inverted;
|
|
pinctrl-names = "default", "opendrain";
|
|
pinctrl-0 = <&sdio_pins>;
|
|
pinctrl-1 = <&sdio_pins_od>;
|
|
bus-width = <4>;
|
|
};
|
|
|
|
&timers1 {
|
|
status = "okay";
|
|
|
|
pwm {
|
|
pinctrl-0 = <&pwm1_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
timer@0 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&timers3 {
|
|
status = "okay";
|
|
|
|
pwm {
|
|
pinctrl-0 = <&pwm3_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
timer@2 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&usart1 {
|
|
pinctrl-0 = <&usart1_pins_a>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg_hs {
|
|
dr_mode = "host";
|
|
phys = <&usbotg_hs_phy>;
|
|
phy-names = "usb2-phy";
|
|
pinctrl-0 = <&usbotg_hs_pins_a>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|