u-boot-brain/board/pcippc2/pcippc2.c
Wolfgang Denk 7640f41988 Fix boards broken after removal of legacy NAND and DoC support
Commit 2419169f removed support for legacy NAND and disk on chip but
missed to update the code for a few boards. This patch fixes the
resulting build issues.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-19 19:37:24 +02:00

254 lines
4.8 KiB
C

/*
* (C) Copyright 2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <common.h>
#include <command.h>
#include <asm/io.h>
#include <linux/mtd/doc2000.h>
#include <watchdog.h>
#include <pci.h>
#include <netdev.h>
#include "hardware.h"
#include "pcippc2.h"
#include "sconsole.h"
#include "fpga_serial.h"
DECLARE_GLOBAL_DATA_PTR;
#if defined(CONFIG_WATCHDOG)
static int pcippc2_wdt_init_done = 0;
void pcippc2_wdt_init (void);
#endif
/* Check board identity
*/
int checkboard (void)
{
#ifdef CONFIG_PCIPPC2
puts ("Board: Gespac PCIPPC-2\n");
#else
puts ("Board: Gespac PCIPPC-6\n");
#endif
return 0;
}
/* RAM size is stored in CPC0_RGBAN1
*/
u32 pcippc2_sdram_size (void)
{
return in32 (REG (CPC0, RGBAN1));
}
phys_size_t initdram (int board_type)
{
return cpc710_ram_init ();
}
int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
out32 (REG (CPC0, SPOR), 0);
iobarrier_rw ();
while (1);
/* notreached */
return (-1);
}
int board_early_init_f (void)
{
out32 (REG (CPC0, RSTR), 0xC0000000);
iobarrier_rw ();
out32 (REG (CPC0, RSTR), 0xF0000000);
iobarrier_rw ();
out32 (REG (CPC0, UCTL), 0x00F80000);
out32 (REG (CPC0, SIOC0), 0x30000000);
out32 (REG (CPC0, ABCNTL), 0x00000000);
out32 (REG (CPC0, SESR), 0x00000000);
out32 (REG (CPC0, SEAR), 0x00000000);
/* Detect IBM Avignon CPC710 Revision */
if ((in32 (REG (CPC0, UCTL)) & 0x000000F0) == CPC710_TYPE_100P)
out32 (REG (CPC0, PGCHP), 0xA0000040);
else
out32 (REG (CPC0, PGCHP), 0x80800040);
out32 (REG (CPC0, ATAS), 0x709C2508);
iobarrier_rw ();
return 0;
}
void after_reloc (ulong dest_addr)
{
/* Jump to the main U-Boot board init code
*/
board_init_r ((gd_t *)gd, dest_addr);
}
int misc_init_r (void)
{
pcippc2_fpga_init ();
pcippc2_cpci3264_init ();
#if defined(CONFIG_WATCHDOG)
pcippc2_wdt_init ();
#endif
fpga_serial_init (sconsole_get_baudrate ());
sconsole_putc = fpga_serial_putc;
sconsole_puts = fpga_serial_puts;
sconsole_getc = fpga_serial_getc;
sconsole_tstc = fpga_serial_tstc;
sconsole_setbrg = fpga_serial_setbrg;
sconsole_flush ();
return (0);
}
void pci_init_board (void)
{
cpc710_pci_init ();
/* FPGA requires no retry timeouts to be enabled
*/
cpc710_pci_enable_timeout ();
}
#ifdef CONFIG_CMD_DOC
void doc_init (void)
{
doc_probe (pcippc2_fpga1_phys + HW_FPGA1_DOC);
}
#endif
void pcippc2_cpci3264_init (void)
{
pci_dev_t bdf = pci_find_device(FPGA_VENDOR_ID, FPGA_DEVICE_ID, 0);
if (bdf == -1)
{
puts("Unable to find FPGA !\n");
hang();
}
if((in32(pcippc2_fpga0_phys + HW_FPGA0_BOARD) & 0x01000000) == 0x01000000)
/* 32-bits Compact PCI bus - LSB bit */
{
iobarrier_rw();
out32(BRIDGE(CPCI, PCIDG), 0x40000000); /* 32-bits bridge, Pipeline */
iobarrier_rw();
}
}
#if defined(CONFIG_WATCHDOG)
void pcippc2_wdt_init (void)
{
out16r (FPGA (WDT, PROG), 0xffff);
out8 (FPGA (WDT, CTRL), 0x1);
pcippc2_wdt_init_done = 1;
}
void pcippc2_wdt_done (void)
{
out8 (FPGA (WDT, CTRL), 0x0);
pcippc2_wdt_init_done = 0;
}
void pcippc2_wdt_reset (void)
{
if (pcippc2_wdt_init_done == 1)
out8 (FPGA (WDT, REFRESH), 0x56);
}
void watchdog_reset (void)
{
int re_enable = disable_interrupts ();
pcippc2_wdt_reset ();
if (re_enable)
enable_interrupts ();
}
#if defined(CONFIG_CMD_BSP)
int do_wd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
switch (argc) {
case 1:
printf ("Watchdog timer status is %s\n",
pcippc2_wdt_init_done == 1 ? "on" : "off");
return 0;
case 2:
if (!strcmp(argv[1],"on")) {
pcippc2_wdt_init();
printf("Watchdog timer now is on\n");
return 0;
} else if (!strcmp(argv[1],"off")) {
pcippc2_wdt_done();
printf("Watchdog timer now is off\n");
return 0;
} else
break;
default:
break;
}
cmd_usage(cmdtp);
return 1;
}
U_BOOT_CMD(
wd, 2, 1, do_wd,
"check and set watchdog",
"on - switch watchDog on\n"
"wd off - switch watchdog off\n"
"wd - print current status"
);
#endif
#endif /* CONFIG_WATCHDOG */
int board_eth_init(bd_t *bis)
{
return pci_eth_init(bis);
}