mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 08:58:52 +09:00
![Samuel Egli](/assets/img/avatar_default.png)
- dxr2: define unused pins as input - do not enable RTC32K OSC on dxr2 board - update default environment - add splashpos=m,m to default environment, so splash screen is always centered. - adapt environment for bootcount feature - add altbootcmd to default environment - rut: SPL add early reset pulse for eth-phy, maXTouch and display - rut: display timing aenderungen - siemens boards: adapt for background color = white - add boutcount feature for the siemens boards store the bootcount in the environment, as we have no softreset save registers on this hardware. Use therefore the CONFIG_BOOTCOUNT_ENV bootcount driver. - change spi mode from 3 to 0 for the lcd init - add gpio pin for lcd reset with state 0 and add mdelay - siemens boards: use own USB id's - add dfu serial and device number for siemens boards Add for the siemens boards the possibility to define in dfu mode, the iSerialNumber and the bcdDevice fields in the USB Device descriptor. - fix upgrade mechanism based on bootcount Correct location of saveenv and remove not active variable. Add CONFIG_BOOT_RETRY_TIME and CONFIG_RESET_TO_RETRY to reboot board in case of empty kernel partition. Without these defines an empty kernel partition leads to an abort of boot process and one remains in u-boot prompt. - general cleanup of dxr2, pxm2 and rut boards all: * Remove net boot from bootcmd Ping can cause a crash on boards without ethernet phy. net_nfs command is used only for development * Add reset at the end of bootcmd In order to have an immediate reset of the boot when bootcmd fails, add reset at the end of bootcmd. rut: * add nand_img_size dxr2: * update nand_img_size * ddr3 timings updated with iocontrol property that can be modified via eeprom. New default parameters from software leveling with draco ES2. Signed-off-by: Samuel Egli <samuel.egli@siemens.com> Signed-off-by: Pascal Bach <pascal.bach@siemens.com> Signed-off-by: Roger Meier <r.meier@siemens.com> Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Matthias Michel <matthias.michel@siemens.com> Cc: Tom Rini <trini@ti.com>
305 lines
7.2 KiB
C
305 lines
7.2 KiB
C
/*
|
|
*
|
|
* Read FactorySet information from EEPROM into global structure.
|
|
* (C) Copyright 2013 Siemens Schweiz AG
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#if !defined(CONFIG_SPL_BUILD)
|
|
|
|
#include <common.h>
|
|
#include <i2c.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/unaligned.h>
|
|
#include <net.h>
|
|
#include <errno.h>
|
|
#include <g_dnl.h>
|
|
#include "factoryset.h"
|
|
|
|
#define EEPR_PG_SZ 0x80
|
|
#define EEPROM_FATORYSET_OFFSET 0x400
|
|
#define OFF_PG EEPROM_FATORYSET_OFFSET/EEPR_PG_SZ
|
|
|
|
/* Global variable that contains necessary information from FactorySet */
|
|
struct factorysetcontainer factory_dat;
|
|
|
|
#define fact_get_char(i) *((char *)&eeprom_buf[i])
|
|
|
|
static int fact_match(unsigned char *eeprom_buf, uchar *s1, int i2)
|
|
{
|
|
if (s1 == NULL)
|
|
return -1;
|
|
|
|
while (*s1 == fact_get_char(i2++))
|
|
if (*s1++ == '=')
|
|
return i2;
|
|
|
|
if (*s1 == '\0' && fact_get_char(i2-1) == '=')
|
|
return i2;
|
|
|
|
return -1;
|
|
}
|
|
|
|
static int get_factory_val(unsigned char *eeprom_buf, int size, uchar *name,
|
|
uchar *buf, int len)
|
|
{
|
|
int i, nxt = 0;
|
|
|
|
for (i = 0; fact_get_char(i) != '\0'; i = nxt + 1) {
|
|
int val, n;
|
|
|
|
for (nxt = i; fact_get_char(nxt) != '\0'; ++nxt) {
|
|
if (nxt >= size)
|
|
return -1;
|
|
}
|
|
|
|
val = fact_match(eeprom_buf, (uchar *)name, i);
|
|
if (val < 0)
|
|
continue;
|
|
|
|
/* found; copy out */
|
|
for (n = 0; n < len; ++n, ++buf) {
|
|
*buf = fact_get_char(val++);
|
|
if (*buf == '\0')
|
|
return n;
|
|
}
|
|
|
|
if (n)
|
|
*--buf = '\0';
|
|
|
|
printf("env_buf [%d bytes] too small for value of \"%s\"\n",
|
|
len, name);
|
|
|
|
return n;
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
static
|
|
int get_factory_record_val(unsigned char *eeprom_buf, int size, uchar *record,
|
|
uchar *name, uchar *buf, int len)
|
|
{
|
|
int ret = -1;
|
|
int i, nxt = 0;
|
|
int c;
|
|
unsigned char end = 0xff;
|
|
|
|
for (i = 0; fact_get_char(i) != end; i = nxt) {
|
|
nxt = i + 1;
|
|
if (fact_get_char(i) == '>') {
|
|
int pos;
|
|
int endpos;
|
|
int z;
|
|
|
|
c = strncmp((char *)&eeprom_buf[i + 1], (char *)record,
|
|
strlen((char *)record));
|
|
if (c == 0) {
|
|
/* record found */
|
|
pos = i + strlen((char *)record) + 2;
|
|
nxt = pos;
|
|
/* search for "<" */
|
|
c = -1;
|
|
for (z = pos; fact_get_char(z) != end; z++) {
|
|
if ((fact_get_char(z) == '<') ||
|
|
(fact_get_char(z) == '>')) {
|
|
endpos = z;
|
|
nxt = endpos;
|
|
c = 0;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
if (c == 0) {
|
|
/* end found -> call get_factory_val */
|
|
eeprom_buf[endpos] = end;
|
|
ret = get_factory_val(&eeprom_buf[pos],
|
|
size - pos, name, buf, len);
|
|
/* fix buffer */
|
|
eeprom_buf[endpos] = '<';
|
|
debug("%s: %s.%s = %s\n",
|
|
__func__, record, name, buf);
|
|
return ret;
|
|
}
|
|
}
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
int factoryset_read_eeprom(int i2c_addr)
|
|
{
|
|
int i, pages = 0, size = 0;
|
|
unsigned char eeprom_buf[0x3c00], hdr[4], buf[MAX_STRING_LENGTH];
|
|
unsigned char *cp, *cp1;
|
|
|
|
#if defined(CONFIG_DFU_FUNCTION)
|
|
factory_dat.usb_vendor_id = CONFIG_G_DNL_VENDOR_NUM;
|
|
factory_dat.usb_product_id = CONFIG_G_DNL_PRODUCT_NUM;
|
|
#endif
|
|
if (i2c_probe(i2c_addr))
|
|
goto err;
|
|
|
|
if (i2c_read(i2c_addr, EEPROM_FATORYSET_OFFSET, 2, hdr, sizeof(hdr)))
|
|
goto err;
|
|
|
|
if ((hdr[0] != 0x99) || (hdr[1] != 0x80)) {
|
|
printf("FactorySet is not right in eeprom.\n");
|
|
return 1;
|
|
}
|
|
|
|
/* get FactorySet size */
|
|
size = (hdr[2] << 8) + hdr[3] + sizeof(hdr);
|
|
if (size > 0x3bfa)
|
|
size = 0x3bfa;
|
|
|
|
pages = size / EEPR_PG_SZ;
|
|
|
|
/*
|
|
* read the eeprom using i2c
|
|
* I can not read entire eeprom in once, so separate into several
|
|
* times. Furthermore, fetch eeprom take longer time, so we fetch
|
|
* data after every time we got a record from eeprom
|
|
*/
|
|
debug("Read eeprom page :\n");
|
|
for (i = 0; i < pages; i++)
|
|
if (i2c_read(i2c_addr, (OFF_PG + i) * EEPR_PG_SZ, 2,
|
|
eeprom_buf + (i * EEPR_PG_SZ), EEPR_PG_SZ))
|
|
goto err;
|
|
|
|
if (size % EEPR_PG_SZ)
|
|
if (i2c_read(i2c_addr, (OFF_PG + pages) * EEPR_PG_SZ, 2,
|
|
eeprom_buf + (pages * EEPR_PG_SZ),
|
|
(size % EEPR_PG_SZ)))
|
|
goto err;
|
|
|
|
/* we do below just for eeprom align */
|
|
for (i = 0; i < size; i++)
|
|
if (eeprom_buf[i] == '\n')
|
|
eeprom_buf[i] = 0;
|
|
|
|
/* skip header */
|
|
size -= sizeof(hdr);
|
|
cp = (uchar *)eeprom_buf + sizeof(hdr);
|
|
|
|
/* get mac address */
|
|
get_factory_record_val(cp, size, (uchar *)"ETH1", (uchar *)"mac",
|
|
buf, MAX_STRING_LENGTH);
|
|
cp1 = buf;
|
|
for (i = 0; i < 6; i++) {
|
|
factory_dat.mac[i] = simple_strtoul((char *)cp1, NULL, 16);
|
|
cp1 += 3;
|
|
}
|
|
|
|
#if defined(CONFIG_DFU_FUNCTION)
|
|
/* read vid and pid for dfu mode */
|
|
if (0 <= get_factory_record_val(cp, size, (uchar *)"USBD1",
|
|
(uchar *)"vid", buf,
|
|
MAX_STRING_LENGTH)) {
|
|
factory_dat.usb_vendor_id = simple_strtoul((char *)buf,
|
|
NULL, 16);
|
|
}
|
|
|
|
if (0 <= get_factory_record_val(cp, size, (uchar *)"USBD1",
|
|
(uchar *)"pid", buf,
|
|
MAX_STRING_LENGTH)) {
|
|
factory_dat.usb_product_id = simple_strtoul((char *)buf,
|
|
NULL, 16);
|
|
}
|
|
printf("DFU USB: VID = 0x%4x, PID = 0x%4x\n", factory_dat.usb_vendor_id,
|
|
factory_dat.usb_product_id);
|
|
#endif
|
|
if (0 <= get_factory_record_val(cp, size, (uchar *)"DEV",
|
|
(uchar *)"id", buf,
|
|
MAX_STRING_LENGTH)) {
|
|
if (strncmp((const char *)buf, "PXM50", 5) == 0)
|
|
factory_dat.pxm50 = 1;
|
|
else
|
|
factory_dat.pxm50 = 0;
|
|
}
|
|
debug("PXM50: %d\n", factory_dat.pxm50);
|
|
#if defined(CONFIG_VIDEO)
|
|
if (0 <= get_factory_record_val(cp, size, (uchar *)"DISP1",
|
|
(uchar *)"name", factory_dat.disp_name,
|
|
MAX_STRING_LENGTH)) {
|
|
debug("display name: %s\n", factory_dat.disp_name);
|
|
}
|
|
#endif
|
|
if (0 <= get_factory_record_val(cp, size, (uchar *)"DEV",
|
|
(uchar *)"num", factory_dat.serial,
|
|
MAX_STRING_LENGTH)) {
|
|
debug("serial number: %s\n", factory_dat.serial);
|
|
}
|
|
if (0 <= get_factory_record_val(cp, size, (uchar *)"DEV",
|
|
(uchar *)"ver", buf,
|
|
MAX_STRING_LENGTH)) {
|
|
factory_dat.version = simple_strtoul((char *)buf,
|
|
NULL, 16);
|
|
debug("version number: %d\n", factory_dat.version);
|
|
}
|
|
|
|
return 0;
|
|
|
|
err:
|
|
printf("Could not read the EEPROM; something fundamentally wrong on the I2C bus.\n");
|
|
return 1;
|
|
}
|
|
|
|
static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
|
|
|
|
static int factoryset_mac_setenv(void)
|
|
{
|
|
uint8_t mac_addr[6];
|
|
|
|
debug("FactorySet: Set mac address\n");
|
|
if (is_valid_ether_addr(factory_dat.mac)) {
|
|
memcpy(mac_addr, factory_dat.mac, 6);
|
|
} else {
|
|
uint32_t mac_hi, mac_lo;
|
|
|
|
debug("Warning: FactorySet: <ethaddr> not set. Fallback to E-fuse\n");
|
|
mac_lo = readl(&cdev->macid0l);
|
|
mac_hi = readl(&cdev->macid0h);
|
|
|
|
mac_addr[0] = mac_hi & 0xFF;
|
|
mac_addr[1] = (mac_hi & 0xFF00) >> 8;
|
|
mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
|
|
mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
|
|
mac_addr[4] = mac_lo & 0xFF;
|
|
mac_addr[5] = (mac_lo & 0xFF00) >> 8;
|
|
if (!is_valid_ether_addr(mac_addr)) {
|
|
printf("Warning: ethaddr not set by FactorySet or E-fuse. Set <ethaddr> variable to overcome this.\n");
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
eth_setenv_enetaddr("ethaddr", mac_addr);
|
|
return 0;
|
|
}
|
|
|
|
int factoryset_setenv(void)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (factoryset_mac_setenv() < 0)
|
|
ret = -1;
|
|
|
|
return ret;
|
|
}
|
|
|
|
int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name)
|
|
{
|
|
put_unaligned(factory_dat.usb_vendor_id, &dev->idVendor);
|
|
put_unaligned(factory_dat.usb_product_id, &dev->idProduct);
|
|
g_dnl_set_serialnumber((char *)factory_dat.serial);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int g_dnl_get_board_bcd_device_number(int gcnum)
|
|
{
|
|
return factory_dat.version;
|
|
}
|
|
#endif /* defined(CONFIG_SPL_BUILD) */
|