mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 08:58:52 +09:00
![Tom Rini](/assets/img/avatar_default.png)
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
1015 lines
24 KiB
C
1015 lines
24 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Atheros AR71xx / AR9xxx GMAC driver
|
|
*
|
|
* Copyright (C) 2016 Marek Vasut <marex@denx.de>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <miiphy.h>
|
|
#include <malloc.h>
|
|
#include <linux/compiler.h>
|
|
#include <linux/err.h>
|
|
#include <linux/mii.h>
|
|
#include <wait_bit.h>
|
|
#include <asm/io.h>
|
|
|
|
#include <mach/ath79.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
enum ag7xxx_model {
|
|
AG7XXX_MODEL_AG933X,
|
|
AG7XXX_MODEL_AG934X,
|
|
};
|
|
|
|
/* MAC Configuration 1 */
|
|
#define AG7XXX_ETH_CFG1 0x00
|
|
#define AG7XXX_ETH_CFG1_SOFT_RST BIT(31)
|
|
#define AG7XXX_ETH_CFG1_RX_RST BIT(19)
|
|
#define AG7XXX_ETH_CFG1_TX_RST BIT(18)
|
|
#define AG7XXX_ETH_CFG1_LOOPBACK BIT(8)
|
|
#define AG7XXX_ETH_CFG1_RX_EN BIT(2)
|
|
#define AG7XXX_ETH_CFG1_TX_EN BIT(0)
|
|
|
|
/* MAC Configuration 2 */
|
|
#define AG7XXX_ETH_CFG2 0x04
|
|
#define AG7XXX_ETH_CFG2_IF_1000 BIT(9)
|
|
#define AG7XXX_ETH_CFG2_IF_10_100 BIT(8)
|
|
#define AG7XXX_ETH_CFG2_IF_SPEED_MASK (3 << 8)
|
|
#define AG7XXX_ETH_CFG2_HUGE_FRAME_EN BIT(5)
|
|
#define AG7XXX_ETH_CFG2_LEN_CHECK BIT(4)
|
|
#define AG7XXX_ETH_CFG2_PAD_CRC_EN BIT(2)
|
|
#define AG7XXX_ETH_CFG2_FDX BIT(0)
|
|
|
|
/* MII Configuration */
|
|
#define AG7XXX_ETH_MII_MGMT_CFG 0x20
|
|
#define AG7XXX_ETH_MII_MGMT_CFG_RESET BIT(31)
|
|
|
|
/* MII Command */
|
|
#define AG7XXX_ETH_MII_MGMT_CMD 0x24
|
|
#define AG7XXX_ETH_MII_MGMT_CMD_READ 0x1
|
|
|
|
/* MII Address */
|
|
#define AG7XXX_ETH_MII_MGMT_ADDRESS 0x28
|
|
#define AG7XXX_ETH_MII_MGMT_ADDRESS_SHIFT 8
|
|
|
|
/* MII Control */
|
|
#define AG7XXX_ETH_MII_MGMT_CTRL 0x2c
|
|
|
|
/* MII Status */
|
|
#define AG7XXX_ETH_MII_MGMT_STATUS 0x30
|
|
|
|
/* MII Indicators */
|
|
#define AG7XXX_ETH_MII_MGMT_IND 0x34
|
|
#define AG7XXX_ETH_MII_MGMT_IND_INVALID BIT(2)
|
|
#define AG7XXX_ETH_MII_MGMT_IND_BUSY BIT(0)
|
|
|
|
/* STA Address 1 & 2 */
|
|
#define AG7XXX_ETH_ADDR1 0x40
|
|
#define AG7XXX_ETH_ADDR2 0x44
|
|
|
|
/* ETH Configuration 0 - 5 */
|
|
#define AG7XXX_ETH_FIFO_CFG_0 0x48
|
|
#define AG7XXX_ETH_FIFO_CFG_1 0x4c
|
|
#define AG7XXX_ETH_FIFO_CFG_2 0x50
|
|
#define AG7XXX_ETH_FIFO_CFG_3 0x54
|
|
#define AG7XXX_ETH_FIFO_CFG_4 0x58
|
|
#define AG7XXX_ETH_FIFO_CFG_5 0x5c
|
|
|
|
/* DMA Transfer Control for Queue 0 */
|
|
#define AG7XXX_ETH_DMA_TX_CTRL 0x180
|
|
#define AG7XXX_ETH_DMA_TX_CTRL_TXE BIT(0)
|
|
|
|
/* Descriptor Address for Queue 0 Tx */
|
|
#define AG7XXX_ETH_DMA_TX_DESC 0x184
|
|
|
|
/* DMA Tx Status */
|
|
#define AG7XXX_ETH_DMA_TX_STATUS 0x188
|
|
|
|
/* Rx Control */
|
|
#define AG7XXX_ETH_DMA_RX_CTRL 0x18c
|
|
#define AG7XXX_ETH_DMA_RX_CTRL_RXE BIT(0)
|
|
|
|
/* Pointer to Rx Descriptor */
|
|
#define AG7XXX_ETH_DMA_RX_DESC 0x190
|
|
|
|
/* Rx Status */
|
|
#define AG7XXX_ETH_DMA_RX_STATUS 0x194
|
|
|
|
/* Custom register at 0x18070000 */
|
|
#define AG7XXX_GMAC_ETH_CFG 0x00
|
|
#define AG7XXX_ETH_CFG_SW_PHY_ADDR_SWAP BIT(8)
|
|
#define AG7XXX_ETH_CFG_SW_PHY_SWAP BIT(7)
|
|
#define AG7XXX_ETH_CFG_SW_ONLY_MODE BIT(6)
|
|
#define AG7XXX_ETH_CFG_GE0_ERR_EN BIT(5)
|
|
#define AG7XXX_ETH_CFG_MII_GE0_SLAVE BIT(4)
|
|
#define AG7XXX_ETH_CFG_MII_GE0_MASTER BIT(3)
|
|
#define AG7XXX_ETH_CFG_GMII_GE0 BIT(2)
|
|
#define AG7XXX_ETH_CFG_MII_GE0 BIT(1)
|
|
#define AG7XXX_ETH_CFG_RGMII_GE0 BIT(0)
|
|
|
|
#define CONFIG_TX_DESCR_NUM 8
|
|
#define CONFIG_RX_DESCR_NUM 8
|
|
#define CONFIG_ETH_BUFSIZE 2048
|
|
#define TX_TOTAL_BUFSIZE (CONFIG_ETH_BUFSIZE * CONFIG_TX_DESCR_NUM)
|
|
#define RX_TOTAL_BUFSIZE (CONFIG_ETH_BUFSIZE * CONFIG_RX_DESCR_NUM)
|
|
|
|
/* DMA descriptor. */
|
|
struct ag7xxx_dma_desc {
|
|
u32 data_addr;
|
|
#define AG7XXX_DMADESC_IS_EMPTY BIT(31)
|
|
#define AG7XXX_DMADESC_FTPP_OVERRIDE_OFFSET 16
|
|
#define AG7XXX_DMADESC_PKT_SIZE_OFFSET 0
|
|
#define AG7XXX_DMADESC_PKT_SIZE_MASK 0xfff
|
|
u32 config;
|
|
u32 next_desc;
|
|
u32 _pad[5];
|
|
};
|
|
|
|
struct ar7xxx_eth_priv {
|
|
struct ag7xxx_dma_desc tx_mac_descrtable[CONFIG_TX_DESCR_NUM];
|
|
struct ag7xxx_dma_desc rx_mac_descrtable[CONFIG_RX_DESCR_NUM];
|
|
char txbuffs[TX_TOTAL_BUFSIZE] __aligned(ARCH_DMA_MINALIGN);
|
|
char rxbuffs[RX_TOTAL_BUFSIZE] __aligned(ARCH_DMA_MINALIGN);
|
|
|
|
void __iomem *regs;
|
|
void __iomem *phyregs;
|
|
|
|
struct eth_device *dev;
|
|
struct phy_device *phydev;
|
|
struct mii_dev *bus;
|
|
|
|
u32 interface;
|
|
u32 tx_currdescnum;
|
|
u32 rx_currdescnum;
|
|
enum ag7xxx_model model;
|
|
};
|
|
|
|
/*
|
|
* Switch and MDIO access
|
|
*/
|
|
static int ag7xxx_switch_read(struct mii_dev *bus, int addr, int reg, u16 *val)
|
|
{
|
|
struct ar7xxx_eth_priv *priv = bus->priv;
|
|
void __iomem *regs = priv->phyregs;
|
|
int ret;
|
|
|
|
writel(0x0, regs + AG7XXX_ETH_MII_MGMT_CMD);
|
|
writel((addr << AG7XXX_ETH_MII_MGMT_ADDRESS_SHIFT) | reg,
|
|
regs + AG7XXX_ETH_MII_MGMT_ADDRESS);
|
|
writel(AG7XXX_ETH_MII_MGMT_CMD_READ,
|
|
regs + AG7XXX_ETH_MII_MGMT_CMD);
|
|
|
|
ret = wait_for_bit_le32(regs + AG7XXX_ETH_MII_MGMT_IND,
|
|
AG7XXX_ETH_MII_MGMT_IND_BUSY, 0, 1000, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
*val = readl(regs + AG7XXX_ETH_MII_MGMT_STATUS) & 0xffff;
|
|
writel(0x0, regs + AG7XXX_ETH_MII_MGMT_CMD);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ag7xxx_switch_write(struct mii_dev *bus, int addr, int reg, u16 val)
|
|
{
|
|
struct ar7xxx_eth_priv *priv = bus->priv;
|
|
void __iomem *regs = priv->phyregs;
|
|
int ret;
|
|
|
|
writel((addr << AG7XXX_ETH_MII_MGMT_ADDRESS_SHIFT) | reg,
|
|
regs + AG7XXX_ETH_MII_MGMT_ADDRESS);
|
|
writel(val, regs + AG7XXX_ETH_MII_MGMT_CTRL);
|
|
|
|
ret = wait_for_bit_le32(regs + AG7XXX_ETH_MII_MGMT_IND,
|
|
AG7XXX_ETH_MII_MGMT_IND_BUSY, 0, 1000, 0);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ag7xxx_switch_reg_read(struct mii_dev *bus, int reg, u32 *val)
|
|
{
|
|
struct ar7xxx_eth_priv *priv = bus->priv;
|
|
u32 phy_addr;
|
|
u32 reg_addr;
|
|
u32 phy_temp;
|
|
u32 reg_temp;
|
|
u16 rv = 0;
|
|
int ret;
|
|
|
|
if (priv->model == AG7XXX_MODEL_AG933X) {
|
|
phy_addr = 0x1f;
|
|
reg_addr = 0x10;
|
|
} else if (priv->model == AG7XXX_MODEL_AG934X) {
|
|
phy_addr = 0x18;
|
|
reg_addr = 0x00;
|
|
} else
|
|
return -EINVAL;
|
|
|
|
ret = ag7xxx_switch_write(bus, phy_addr, reg_addr, reg >> 9);
|
|
if (ret)
|
|
return ret;
|
|
|
|
phy_temp = ((reg >> 6) & 0x7) | 0x10;
|
|
reg_temp = (reg >> 1) & 0x1e;
|
|
*val = 0;
|
|
|
|
ret = ag7xxx_switch_read(bus, phy_temp, reg_temp | 0, &rv);
|
|
if (ret < 0)
|
|
return ret;
|
|
*val |= rv;
|
|
|
|
ret = ag7xxx_switch_read(bus, phy_temp, reg_temp | 1, &rv);
|
|
if (ret < 0)
|
|
return ret;
|
|
*val |= (rv << 16);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ag7xxx_switch_reg_write(struct mii_dev *bus, int reg, u32 val)
|
|
{
|
|
struct ar7xxx_eth_priv *priv = bus->priv;
|
|
u32 phy_addr;
|
|
u32 reg_addr;
|
|
u32 phy_temp;
|
|
u32 reg_temp;
|
|
int ret;
|
|
|
|
if (priv->model == AG7XXX_MODEL_AG933X) {
|
|
phy_addr = 0x1f;
|
|
reg_addr = 0x10;
|
|
} else if (priv->model == AG7XXX_MODEL_AG934X) {
|
|
phy_addr = 0x18;
|
|
reg_addr = 0x00;
|
|
} else
|
|
return -EINVAL;
|
|
|
|
ret = ag7xxx_switch_write(bus, phy_addr, reg_addr, reg >> 9);
|
|
if (ret)
|
|
return ret;
|
|
|
|
phy_temp = ((reg >> 6) & 0x7) | 0x10;
|
|
reg_temp = (reg >> 1) & 0x1e;
|
|
|
|
/*
|
|
* The switch on AR933x has some special register behavior, which
|
|
* expects particular write order of their nibbles:
|
|
* 0x40 ..... MSB first, LSB second
|
|
* 0x50 ..... MSB first, LSB second
|
|
* 0x98 ..... LSB first, MSB second
|
|
* others ... don't care
|
|
*/
|
|
if ((priv->model == AG7XXX_MODEL_AG933X) && (reg == 0x98)) {
|
|
ret = ag7xxx_switch_write(bus, phy_temp, reg_temp | 0, val & 0xffff);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = ag7xxx_switch_write(bus, phy_temp, reg_temp | 1, val >> 16);
|
|
if (ret < 0)
|
|
return ret;
|
|
} else {
|
|
ret = ag7xxx_switch_write(bus, phy_temp, reg_temp | 1, val >> 16);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = ag7xxx_switch_write(bus, phy_temp, reg_temp | 0, val & 0xffff);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ag7xxx_mdio_rw(struct mii_dev *bus, int addr, int reg, u32 val)
|
|
{
|
|
u32 data;
|
|
unsigned long start;
|
|
int ret;
|
|
/* No idea if this is long enough or too long */
|
|
int timeout_ms = 1000;
|
|
|
|
/* Dummy read followed by PHY read/write command. */
|
|
ret = ag7xxx_switch_reg_read(bus, 0x98, &data);
|
|
if (ret < 0)
|
|
return ret;
|
|
data = val | (reg << 16) | (addr << 21) | BIT(30) | BIT(31);
|
|
ret = ag7xxx_switch_reg_write(bus, 0x98, data);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
start = get_timer(0);
|
|
|
|
/* Wait for operation to finish */
|
|
do {
|
|
ret = ag7xxx_switch_reg_read(bus, 0x98, &data);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (get_timer(start) > timeout_ms)
|
|
return -ETIMEDOUT;
|
|
} while (data & BIT(31));
|
|
|
|
return data & 0xffff;
|
|
}
|
|
|
|
static int ag7xxx_mdio_read(struct mii_dev *bus, int addr, int devad, int reg)
|
|
{
|
|
return ag7xxx_mdio_rw(bus, addr, reg, BIT(27));
|
|
}
|
|
|
|
static int ag7xxx_mdio_write(struct mii_dev *bus, int addr, int devad, int reg,
|
|
u16 val)
|
|
{
|
|
int ret;
|
|
|
|
ret = ag7xxx_mdio_rw(bus, addr, reg, val);
|
|
if (ret < 0)
|
|
return ret;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* DMA ring handlers
|
|
*/
|
|
static void ag7xxx_dma_clean_tx(struct udevice *dev)
|
|
{
|
|
struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
|
|
struct ag7xxx_dma_desc *curr, *next;
|
|
u32 start, end;
|
|
int i;
|
|
|
|
for (i = 0; i < CONFIG_TX_DESCR_NUM; i++) {
|
|
curr = &priv->tx_mac_descrtable[i];
|
|
next = &priv->tx_mac_descrtable[(i + 1) % CONFIG_TX_DESCR_NUM];
|
|
|
|
curr->data_addr = virt_to_phys(&priv->txbuffs[i * CONFIG_ETH_BUFSIZE]);
|
|
curr->config = AG7XXX_DMADESC_IS_EMPTY;
|
|
curr->next_desc = virt_to_phys(next);
|
|
}
|
|
|
|
priv->tx_currdescnum = 0;
|
|
|
|
/* Cache: Flush descriptors, don't care about buffers. */
|
|
start = (u32)(&priv->tx_mac_descrtable[0]);
|
|
end = start + sizeof(priv->tx_mac_descrtable);
|
|
flush_dcache_range(start, end);
|
|
}
|
|
|
|
static void ag7xxx_dma_clean_rx(struct udevice *dev)
|
|
{
|
|
struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
|
|
struct ag7xxx_dma_desc *curr, *next;
|
|
u32 start, end;
|
|
int i;
|
|
|
|
for (i = 0; i < CONFIG_RX_DESCR_NUM; i++) {
|
|
curr = &priv->rx_mac_descrtable[i];
|
|
next = &priv->rx_mac_descrtable[(i + 1) % CONFIG_RX_DESCR_NUM];
|
|
|
|
curr->data_addr = virt_to_phys(&priv->rxbuffs[i * CONFIG_ETH_BUFSIZE]);
|
|
curr->config = AG7XXX_DMADESC_IS_EMPTY;
|
|
curr->next_desc = virt_to_phys(next);
|
|
}
|
|
|
|
priv->rx_currdescnum = 0;
|
|
|
|
/* Cache: Flush+Invalidate descriptors, Invalidate buffers. */
|
|
start = (u32)(&priv->rx_mac_descrtable[0]);
|
|
end = start + sizeof(priv->rx_mac_descrtable);
|
|
flush_dcache_range(start, end);
|
|
invalidate_dcache_range(start, end);
|
|
|
|
start = (u32)&priv->rxbuffs;
|
|
end = start + sizeof(priv->rxbuffs);
|
|
invalidate_dcache_range(start, end);
|
|
}
|
|
|
|
/*
|
|
* Ethernet I/O
|
|
*/
|
|
static int ag7xxx_eth_send(struct udevice *dev, void *packet, int length)
|
|
{
|
|
struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
|
|
struct ag7xxx_dma_desc *curr;
|
|
u32 start, end;
|
|
|
|
curr = &priv->tx_mac_descrtable[priv->tx_currdescnum];
|
|
|
|
/* Cache: Invalidate descriptor. */
|
|
start = (u32)curr;
|
|
end = start + sizeof(*curr);
|
|
invalidate_dcache_range(start, end);
|
|
|
|
if (!(curr->config & AG7XXX_DMADESC_IS_EMPTY)) {
|
|
printf("ag7xxx: Out of TX DMA descriptors!\n");
|
|
return -EPERM;
|
|
}
|
|
|
|
/* Copy the packet into the data buffer. */
|
|
memcpy(phys_to_virt(curr->data_addr), packet, length);
|
|
curr->config = length & AG7XXX_DMADESC_PKT_SIZE_MASK;
|
|
|
|
/* Cache: Flush descriptor, Flush buffer. */
|
|
start = (u32)curr;
|
|
end = start + sizeof(*curr);
|
|
flush_dcache_range(start, end);
|
|
start = (u32)phys_to_virt(curr->data_addr);
|
|
end = start + length;
|
|
flush_dcache_range(start, end);
|
|
|
|
/* Load the DMA descriptor and start TX DMA. */
|
|
writel(AG7XXX_ETH_DMA_TX_CTRL_TXE,
|
|
priv->regs + AG7XXX_ETH_DMA_TX_CTRL);
|
|
|
|
/* Switch to next TX descriptor. */
|
|
priv->tx_currdescnum = (priv->tx_currdescnum + 1) % CONFIG_TX_DESCR_NUM;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ag7xxx_eth_recv(struct udevice *dev, int flags, uchar **packetp)
|
|
{
|
|
struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
|
|
struct ag7xxx_dma_desc *curr;
|
|
u32 start, end, length;
|
|
|
|
curr = &priv->rx_mac_descrtable[priv->rx_currdescnum];
|
|
|
|
/* Cache: Invalidate descriptor. */
|
|
start = (u32)curr;
|
|
end = start + sizeof(*curr);
|
|
invalidate_dcache_range(start, end);
|
|
|
|
/* No packets received. */
|
|
if (curr->config & AG7XXX_DMADESC_IS_EMPTY)
|
|
return -EAGAIN;
|
|
|
|
length = curr->config & AG7XXX_DMADESC_PKT_SIZE_MASK;
|
|
|
|
/* Cache: Invalidate buffer. */
|
|
start = (u32)phys_to_virt(curr->data_addr);
|
|
end = start + length;
|
|
invalidate_dcache_range(start, end);
|
|
|
|
/* Receive one packet and return length. */
|
|
*packetp = phys_to_virt(curr->data_addr);
|
|
return length;
|
|
}
|
|
|
|
static int ag7xxx_eth_free_pkt(struct udevice *dev, uchar *packet,
|
|
int length)
|
|
{
|
|
struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
|
|
struct ag7xxx_dma_desc *curr;
|
|
u32 start, end;
|
|
|
|
curr = &priv->rx_mac_descrtable[priv->rx_currdescnum];
|
|
|
|
curr->config = AG7XXX_DMADESC_IS_EMPTY;
|
|
|
|
/* Cache: Flush descriptor. */
|
|
start = (u32)curr;
|
|
end = start + sizeof(*curr);
|
|
flush_dcache_range(start, end);
|
|
|
|
/* Switch to next RX descriptor. */
|
|
priv->rx_currdescnum = (priv->rx_currdescnum + 1) % CONFIG_RX_DESCR_NUM;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ag7xxx_eth_start(struct udevice *dev)
|
|
{
|
|
struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
|
|
|
|
/* FIXME: Check if link up */
|
|
|
|
/* Clear the DMA rings. */
|
|
ag7xxx_dma_clean_tx(dev);
|
|
ag7xxx_dma_clean_rx(dev);
|
|
|
|
/* Load DMA descriptors and start the RX DMA. */
|
|
writel(virt_to_phys(&priv->tx_mac_descrtable[priv->tx_currdescnum]),
|
|
priv->regs + AG7XXX_ETH_DMA_TX_DESC);
|
|
writel(virt_to_phys(&priv->rx_mac_descrtable[priv->rx_currdescnum]),
|
|
priv->regs + AG7XXX_ETH_DMA_RX_DESC);
|
|
writel(AG7XXX_ETH_DMA_RX_CTRL_RXE,
|
|
priv->regs + AG7XXX_ETH_DMA_RX_CTRL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ag7xxx_eth_stop(struct udevice *dev)
|
|
{
|
|
struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
|
|
|
|
/* Stop the TX DMA. */
|
|
writel(0, priv->regs + AG7XXX_ETH_DMA_TX_CTRL);
|
|
wait_for_bit_le32(priv->regs + AG7XXX_ETH_DMA_TX_CTRL, ~0, 0,
|
|
1000, 0);
|
|
|
|
/* Stop the RX DMA. */
|
|
writel(0, priv->regs + AG7XXX_ETH_DMA_RX_CTRL);
|
|
wait_for_bit_le32(priv->regs + AG7XXX_ETH_DMA_RX_CTRL, ~0, 0,
|
|
1000, 0);
|
|
}
|
|
|
|
/*
|
|
* Hardware setup
|
|
*/
|
|
static int ag7xxx_eth_write_hwaddr(struct udevice *dev)
|
|
{
|
|
struct eth_pdata *pdata = dev_get_platdata(dev);
|
|
struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
|
|
unsigned char *mac = pdata->enetaddr;
|
|
u32 macid_lo, macid_hi;
|
|
|
|
macid_hi = mac[3] | (mac[2] << 8) | (mac[1] << 16) | (mac[0] << 24);
|
|
macid_lo = (mac[5] << 16) | (mac[4] << 24);
|
|
|
|
writel(macid_lo, priv->regs + AG7XXX_ETH_ADDR1);
|
|
writel(macid_hi, priv->regs + AG7XXX_ETH_ADDR2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ag7xxx_hw_setup(struct udevice *dev)
|
|
{
|
|
struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
|
|
u32 speed;
|
|
|
|
setbits_be32(priv->regs + AG7XXX_ETH_CFG1,
|
|
AG7XXX_ETH_CFG1_RX_RST | AG7XXX_ETH_CFG1_TX_RST |
|
|
AG7XXX_ETH_CFG1_SOFT_RST);
|
|
|
|
mdelay(10);
|
|
|
|
writel(AG7XXX_ETH_CFG1_RX_EN | AG7XXX_ETH_CFG1_TX_EN,
|
|
priv->regs + AG7XXX_ETH_CFG1);
|
|
|
|
if (priv->interface == PHY_INTERFACE_MODE_RMII)
|
|
speed = AG7XXX_ETH_CFG2_IF_10_100;
|
|
else
|
|
speed = AG7XXX_ETH_CFG2_IF_1000;
|
|
|
|
clrsetbits_be32(priv->regs + AG7XXX_ETH_CFG2,
|
|
AG7XXX_ETH_CFG2_IF_SPEED_MASK,
|
|
speed | AG7XXX_ETH_CFG2_PAD_CRC_EN |
|
|
AG7XXX_ETH_CFG2_LEN_CHECK);
|
|
|
|
writel(0xfff0000, priv->regs + AG7XXX_ETH_FIFO_CFG_1);
|
|
writel(0x1fff, priv->regs + AG7XXX_ETH_FIFO_CFG_2);
|
|
|
|
writel(0x1f00, priv->regs + AG7XXX_ETH_FIFO_CFG_0);
|
|
setbits_be32(priv->regs + AG7XXX_ETH_FIFO_CFG_4, 0x3ffff);
|
|
writel(0x10ffff, priv->regs + AG7XXX_ETH_FIFO_CFG_1);
|
|
writel(0xaaa0555, priv->regs + AG7XXX_ETH_FIFO_CFG_2);
|
|
writel(0x7eccf, priv->regs + AG7XXX_ETH_FIFO_CFG_5);
|
|
writel(0x1f00140, priv->regs + AG7XXX_ETH_FIFO_CFG_3);
|
|
}
|
|
|
|
static int ag7xxx_mii_get_div(void)
|
|
{
|
|
ulong freq = get_bus_freq(0);
|
|
|
|
switch (freq / 1000000) {
|
|
case 150: return 0x7;
|
|
case 175: return 0x5;
|
|
case 200: return 0x4;
|
|
case 210: return 0x9;
|
|
case 220: return 0x9;
|
|
default: return 0x7;
|
|
}
|
|
}
|
|
|
|
static int ag7xxx_mii_setup(struct udevice *dev)
|
|
{
|
|
struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
|
|
int i, ret, div = ag7xxx_mii_get_div();
|
|
u32 reg;
|
|
|
|
if (priv->model == AG7XXX_MODEL_AG933X) {
|
|
/* Unit 0 is PHY-less on AR9331, see datasheet Figure 2-3 */
|
|
if (priv->interface == PHY_INTERFACE_MODE_RMII)
|
|
return 0;
|
|
}
|
|
|
|
if (priv->model == AG7XXX_MODEL_AG934X) {
|
|
writel(AG7XXX_ETH_MII_MGMT_CFG_RESET | 0x4,
|
|
priv->regs + AG7XXX_ETH_MII_MGMT_CFG);
|
|
writel(0x4, priv->regs + AG7XXX_ETH_MII_MGMT_CFG);
|
|
return 0;
|
|
}
|
|
|
|
for (i = 0; i < 10; i++) {
|
|
writel(AG7XXX_ETH_MII_MGMT_CFG_RESET | div,
|
|
priv->regs + AG7XXX_ETH_MII_MGMT_CFG);
|
|
writel(div, priv->regs + AG7XXX_ETH_MII_MGMT_CFG);
|
|
|
|
/* Check the switch */
|
|
ret = ag7xxx_switch_reg_read(priv->bus, 0x10c, ®);
|
|
if (ret)
|
|
continue;
|
|
|
|
if (reg != 0x18007fff)
|
|
continue;
|
|
|
|
return 0;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int ag933x_phy_setup_wan(struct udevice *dev)
|
|
{
|
|
struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
|
|
|
|
/* Configure switch port 4 (GMAC0) */
|
|
return ag7xxx_mdio_write(priv->bus, 4, 0, MII_BMCR, 0x9000);
|
|
}
|
|
|
|
static int ag933x_phy_setup_lan(struct udevice *dev)
|
|
{
|
|
struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
|
|
int i, ret;
|
|
u32 reg;
|
|
|
|
/* Reset the switch */
|
|
ret = ag7xxx_switch_reg_read(priv->bus, 0, ®);
|
|
if (ret)
|
|
return ret;
|
|
reg |= BIT(31);
|
|
ret = ag7xxx_switch_reg_write(priv->bus, 0, reg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
do {
|
|
ret = ag7xxx_switch_reg_read(priv->bus, 0, ®);
|
|
if (ret)
|
|
return ret;
|
|
} while (reg & BIT(31));
|
|
|
|
/* Configure switch ports 0...3 (GMAC1) */
|
|
for (i = 0; i < 4; i++) {
|
|
ret = ag7xxx_mdio_write(priv->bus, 0x4, 0, MII_BMCR, 0x9000);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
/* Enable CPU port */
|
|
ret = ag7xxx_switch_reg_write(priv->bus, 0x78, BIT(8));
|
|
if (ret)
|
|
return ret;
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
ret = ag7xxx_switch_reg_write(priv->bus, i * 0x100, BIT(9));
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
/* QM Control */
|
|
ret = ag7xxx_switch_reg_write(priv->bus, 0x38, 0xc000050e);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Disable Atheros header */
|
|
ret = ag7xxx_switch_reg_write(priv->bus, 0x104, 0x4004);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Tag priority mapping */
|
|
ret = ag7xxx_switch_reg_write(priv->bus, 0x70, 0xfa50);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Enable ARP packets to the CPU */
|
|
ret = ag7xxx_switch_reg_read(priv->bus, 0x5c, ®);
|
|
if (ret)
|
|
return ret;
|
|
reg |= 0x100000;
|
|
ret = ag7xxx_switch_reg_write(priv->bus, 0x5c, reg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ag933x_phy_setup_reset_set(struct udevice *dev, int port)
|
|
{
|
|
struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
ret = ag7xxx_mdio_write(priv->bus, port, 0, MII_ADVERTISE,
|
|
ADVERTISE_ALL | ADVERTISE_PAUSE_CAP |
|
|
ADVERTISE_PAUSE_ASYM);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (priv->model == AG7XXX_MODEL_AG934X) {
|
|
ret = ag7xxx_mdio_write(priv->bus, port, 0, MII_CTRL1000,
|
|
ADVERTISE_1000FULL);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return ag7xxx_mdio_write(priv->bus, port, 0, MII_BMCR,
|
|
BMCR_ANENABLE | BMCR_RESET);
|
|
}
|
|
|
|
static int ag933x_phy_setup_reset_fin(struct udevice *dev, int port)
|
|
{
|
|
struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
do {
|
|
ret = ag7xxx_mdio_read(priv->bus, port, 0, MII_BMCR);
|
|
if (ret < 0)
|
|
return ret;
|
|
mdelay(10);
|
|
} while (ret & BMCR_RESET);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ag933x_phy_setup_common(struct udevice *dev)
|
|
{
|
|
struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
|
|
int i, ret, phymax;
|
|
|
|
if (priv->model == AG7XXX_MODEL_AG933X)
|
|
phymax = 4;
|
|
else if (priv->model == AG7XXX_MODEL_AG934X)
|
|
phymax = 5;
|
|
else
|
|
return -EINVAL;
|
|
|
|
if (priv->interface == PHY_INTERFACE_MODE_RMII) {
|
|
ret = ag933x_phy_setup_reset_set(dev, phymax);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ag933x_phy_setup_reset_fin(dev, phymax);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Read out link status */
|
|
ret = ag7xxx_mdio_read(priv->bus, phymax, 0, MII_MIPSCR);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Switch ports */
|
|
for (i = 0; i < phymax; i++) {
|
|
ret = ag933x_phy_setup_reset_set(dev, i);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
for (i = 0; i < phymax; i++) {
|
|
ret = ag933x_phy_setup_reset_fin(dev, i);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
for (i = 0; i < phymax; i++) {
|
|
/* Read out link status */
|
|
ret = ag7xxx_mdio_read(priv->bus, i, 0, MII_MIPSCR);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ag934x_phy_setup(struct udevice *dev)
|
|
{
|
|
struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
|
|
int i, ret;
|
|
u32 reg;
|
|
|
|
ret = ag7xxx_switch_reg_write(priv->bus, 0x624, 0x7f7f7f7f);
|
|
if (ret)
|
|
return ret;
|
|
ret = ag7xxx_switch_reg_write(priv->bus, 0x10, 0x40000000);
|
|
if (ret)
|
|
return ret;
|
|
ret = ag7xxx_switch_reg_write(priv->bus, 0x4, 0x07600000);
|
|
if (ret)
|
|
return ret;
|
|
ret = ag7xxx_switch_reg_write(priv->bus, 0xc, 0x01000000);
|
|
if (ret)
|
|
return ret;
|
|
ret = ag7xxx_switch_reg_write(priv->bus, 0x7c, 0x0000007e);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* AR8327/AR8328 v1.0 fixup */
|
|
ret = ag7xxx_switch_reg_read(priv->bus, 0, ®);
|
|
if (ret)
|
|
return ret;
|
|
if ((reg & 0xffff) == 0x1201) {
|
|
for (i = 0; i < 5; i++) {
|
|
ret = ag7xxx_mdio_write(priv->bus, i, 0, 0x1d, 0x0);
|
|
if (ret)
|
|
return ret;
|
|
ret = ag7xxx_mdio_write(priv->bus, i, 0, 0x1e, 0x02ea);
|
|
if (ret)
|
|
return ret;
|
|
ret = ag7xxx_mdio_write(priv->bus, i, 0, 0x1d, 0x3d);
|
|
if (ret)
|
|
return ret;
|
|
ret = ag7xxx_mdio_write(priv->bus, i, 0, 0x1e, 0x68a0);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
ret = ag7xxx_switch_reg_read(priv->bus, 0x66c, ®);
|
|
if (ret)
|
|
return ret;
|
|
reg &= ~0x70000;
|
|
ret = ag7xxx_switch_reg_write(priv->bus, 0x66c, reg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ag7xxx_mac_probe(struct udevice *dev)
|
|
{
|
|
struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
ag7xxx_hw_setup(dev);
|
|
ret = ag7xxx_mii_setup(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ag7xxx_eth_write_hwaddr(dev);
|
|
|
|
if (priv->model == AG7XXX_MODEL_AG933X) {
|
|
if (priv->interface == PHY_INTERFACE_MODE_RMII)
|
|
ret = ag933x_phy_setup_wan(dev);
|
|
else
|
|
ret = ag933x_phy_setup_lan(dev);
|
|
} else if (priv->model == AG7XXX_MODEL_AG934X) {
|
|
ret = ag934x_phy_setup(dev);
|
|
} else {
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
return ag933x_phy_setup_common(dev);
|
|
}
|
|
|
|
static int ag7xxx_mdio_probe(struct udevice *dev)
|
|
{
|
|
struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
|
|
struct mii_dev *bus = mdio_alloc();
|
|
|
|
if (!bus)
|
|
return -ENOMEM;
|
|
|
|
bus->read = ag7xxx_mdio_read;
|
|
bus->write = ag7xxx_mdio_write;
|
|
snprintf(bus->name, sizeof(bus->name), dev->name);
|
|
|
|
bus->priv = (void *)priv;
|
|
|
|
return mdio_register(bus);
|
|
}
|
|
|
|
static int ag7xxx_get_phy_iface_offset(struct udevice *dev)
|
|
{
|
|
int offset;
|
|
|
|
offset = fdtdec_lookup_phandle(gd->fdt_blob, dev_of_offset(dev), "phy");
|
|
if (offset <= 0) {
|
|
debug("%s: PHY OF node not found (ret=%i)\n", __func__, offset);
|
|
return -EINVAL;
|
|
}
|
|
|
|
offset = fdt_parent_offset(gd->fdt_blob, offset);
|
|
if (offset <= 0) {
|
|
debug("%s: PHY OF node parent MDIO bus not found (ret=%i)\n",
|
|
__func__, offset);
|
|
return -EINVAL;
|
|
}
|
|
|
|
offset = fdt_parent_offset(gd->fdt_blob, offset);
|
|
if (offset <= 0) {
|
|
debug("%s: PHY MDIO OF node parent MAC not found (ret=%i)\n",
|
|
__func__, offset);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return offset;
|
|
}
|
|
|
|
static int ag7xxx_eth_probe(struct udevice *dev)
|
|
{
|
|
struct eth_pdata *pdata = dev_get_platdata(dev);
|
|
struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
|
|
void __iomem *iobase, *phyiobase;
|
|
int ret, phyreg;
|
|
|
|
/* Decoding of convoluted PHY wiring on Atheros MIPS. */
|
|
ret = ag7xxx_get_phy_iface_offset(dev);
|
|
if (ret <= 0)
|
|
return ret;
|
|
phyreg = fdtdec_get_int(gd->fdt_blob, ret, "reg", -1);
|
|
|
|
iobase = map_physmem(pdata->iobase, 0x200, MAP_NOCACHE);
|
|
phyiobase = map_physmem(phyreg, 0x200, MAP_NOCACHE);
|
|
|
|
debug("%s, iobase=%p, phyiobase=%p, priv=%p\n",
|
|
__func__, iobase, phyiobase, priv);
|
|
priv->regs = iobase;
|
|
priv->phyregs = phyiobase;
|
|
priv->interface = pdata->phy_interface;
|
|
priv->model = dev_get_driver_data(dev);
|
|
|
|
ret = ag7xxx_mdio_probe(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
priv->bus = miiphy_get_dev_by_name(dev->name);
|
|
|
|
ret = ag7xxx_mac_probe(dev);
|
|
debug("%s, ret=%d\n", __func__, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ag7xxx_eth_remove(struct udevice *dev)
|
|
{
|
|
struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
|
|
|
|
free(priv->phydev);
|
|
mdio_unregister(priv->bus);
|
|
mdio_free(priv->bus);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct eth_ops ag7xxx_eth_ops = {
|
|
.start = ag7xxx_eth_start,
|
|
.send = ag7xxx_eth_send,
|
|
.recv = ag7xxx_eth_recv,
|
|
.free_pkt = ag7xxx_eth_free_pkt,
|
|
.stop = ag7xxx_eth_stop,
|
|
.write_hwaddr = ag7xxx_eth_write_hwaddr,
|
|
};
|
|
|
|
static int ag7xxx_eth_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
struct eth_pdata *pdata = dev_get_platdata(dev);
|
|
const char *phy_mode;
|
|
int ret;
|
|
|
|
pdata->iobase = devfdt_get_addr(dev);
|
|
pdata->phy_interface = -1;
|
|
|
|
/* Decoding of convoluted PHY wiring on Atheros MIPS. */
|
|
ret = ag7xxx_get_phy_iface_offset(dev);
|
|
if (ret <= 0)
|
|
return ret;
|
|
|
|
phy_mode = fdt_getprop(gd->fdt_blob, ret, "phy-mode", NULL);
|
|
if (phy_mode)
|
|
pdata->phy_interface = phy_get_interface_by_name(phy_mode);
|
|
if (pdata->phy_interface == -1) {
|
|
debug("%s: Invalid PHY interface '%s'\n", __func__, phy_mode);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id ag7xxx_eth_ids[] = {
|
|
{ .compatible = "qca,ag933x-mac", .data = AG7XXX_MODEL_AG933X },
|
|
{ .compatible = "qca,ag934x-mac", .data = AG7XXX_MODEL_AG934X },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(eth_ag7xxx) = {
|
|
.name = "eth_ag7xxx",
|
|
.id = UCLASS_ETH,
|
|
.of_match = ag7xxx_eth_ids,
|
|
.ofdata_to_platdata = ag7xxx_eth_ofdata_to_platdata,
|
|
.probe = ag7xxx_eth_probe,
|
|
.remove = ag7xxx_eth_remove,
|
|
.ops = &ag7xxx_eth_ops,
|
|
.priv_auto_alloc_size = sizeof(struct ar7xxx_eth_priv),
|
|
.platdata_auto_alloc_size = sizeof(struct eth_pdata),
|
|
.flags = DM_FLAG_ALLOC_PRIV_DMA,
|
|
};
|