mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-07-07 03:36:16 +09:00
08598d6ee9
Add a build target to generate 'boot.bin' which includes SPL. This is used by the platforms BootROM to load SPL directly. This change also conditionally changes what the 'boot.bin' target generates depending on the SoC. Leaving the behaviour unchanged for the AT91 targets. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Cc: Tom Rini <trini@konsulko.com> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
275 lines
7.8 KiB
Makefile
275 lines
7.8 KiB
Makefile
#
|
|
# (C) Copyright 2000-2011
|
|
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
#
|
|
# (C) Copyright 2011
|
|
# Daniel Schwierzeck, daniel.schwierzeck@googlemail.com.
|
|
#
|
|
# (C) Copyright 2011
|
|
# Texas Instruments Incorporated - http://www.ti.com/
|
|
# Aneesh V <aneesh@ti.com>
|
|
#
|
|
# SPDX-License-Identifier: GPL-2.0+
|
|
#
|
|
# Based on top-level Makefile.
|
|
#
|
|
|
|
src := $(obj)
|
|
|
|
# Create output directory if not already present
|
|
_dummy := $(shell [ -d $(obj) ] || mkdir -p $(obj))
|
|
|
|
include $(srctree)/scripts/Kbuild.include
|
|
|
|
-include include/config/auto.conf
|
|
-include $(obj)/include/autoconf.mk
|
|
|
|
KBUILD_CPPFLAGS += -DCONFIG_SPL_BUILD
|
|
ifeq ($(CONFIG_TPL_BUILD),y)
|
|
KBUILD_CPPFLAGS += -DCONFIG_TPL_BUILD
|
|
endif
|
|
|
|
ifeq ($(CONFIG_TPL_BUILD),y)
|
|
SPL_BIN := u-boot-tpl
|
|
else
|
|
SPL_BIN := u-boot-spl
|
|
endif
|
|
|
|
include $(srctree)/config.mk
|
|
include $(srctree)/arch/$(ARCH)/Makefile
|
|
|
|
# Enable garbage collection of un-used sections for SPL
|
|
KBUILD_CFLAGS += -ffunction-sections -fdata-sections
|
|
LDFLAGS_FINAL += --gc-sections
|
|
|
|
# FIX ME
|
|
cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
|
|
$(NOSTDINC_FLAGS)
|
|
|
|
HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
|
|
|
|
libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
|
|
libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
|
|
|
|
libs-$(CONFIG_SPL_FRAMEWORK) += common/spl/
|
|
libs-y += common/init/
|
|
libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/
|
|
libs-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/
|
|
libs-y += drivers/
|
|
libs-y += dts/
|
|
libs-y += fs/
|
|
libs-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/
|
|
libs-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/
|
|
libs-$(CONFIG_SPL_NET_SUPPORT) += net/
|
|
|
|
head-y := $(addprefix $(obj)/,$(head-y))
|
|
libs-y := $(addprefix $(obj)/,$(libs-y))
|
|
u-boot-spl-dirs := $(patsubst %/,%,$(filter %/, $(libs-y)))
|
|
|
|
libs-y := $(patsubst %/, %/built-in.o, $(libs-y))
|
|
|
|
# Add GCC lib
|
|
ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
|
|
PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
|
|
PLATFORM_LIBS := $(filter-out %/lib.a, $(filter-out -lgcc, $(PLATFORM_LIBS))) $(PLATFORM_LIBGCC)
|
|
endif
|
|
|
|
u-boot-spl-init := $(head-y)
|
|
u-boot-spl-main := $(libs-y)
|
|
|
|
# Linker Script
|
|
ifdef CONFIG_SPL_LDSCRIPT
|
|
# need to strip off double quotes
|
|
LDSCRIPT := $(addprefix $(srctree)/,$(CONFIG_SPL_LDSCRIPT:"%"=%))
|
|
endif
|
|
|
|
ifeq ($(wildcard $(LDSCRIPT)),)
|
|
LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot-spl.lds
|
|
endif
|
|
ifeq ($(wildcard $(LDSCRIPT)),)
|
|
LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot-spl.lds
|
|
endif
|
|
ifeq ($(wildcard $(LDSCRIPT)),)
|
|
LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot-spl.lds
|
|
endif
|
|
ifeq ($(wildcard $(LDSCRIPT)),)
|
|
$(error could not find linker script)
|
|
endif
|
|
|
|
# Special flags for CPP when processing the linker script.
|
|
# Pass the version down so we can handle backwards compatibility
|
|
# on the fly.
|
|
LDPPFLAGS += \
|
|
-include $(srctree)/include/u-boot/u-boot.lds.h \
|
|
-include $(objtree)/include/config.h \
|
|
-DCPUDIR=$(CPUDIR) \
|
|
$(shell $(LD) --version | \
|
|
sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
|
|
|
|
quiet_cmd_mkimage = MKIMAGE $@
|
|
cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
|
|
$(if $(KBUILD_VERBOSE:1=), >/dev/null)
|
|
|
|
MKIMAGEFLAGS_MLO = -T omapimage -a $(CONFIG_SPL_TEXT_BASE)
|
|
|
|
MKIMAGEFLAGS_MLO.byteswap = -T omapimage -n byteswap -a $(CONFIG_SPL_TEXT_BASE)
|
|
|
|
MLO MLO.byteswap: $(obj)/u-boot-spl.bin
|
|
$(call if_changed,mkimage)
|
|
|
|
ifeq ($(CONFIG_SYS_SOC),"at91")
|
|
MKIMAGEFLAGS_boot.bin = -T atmelimage
|
|
|
|
ifeq ($(CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER),y)
|
|
MKIMAGEFLAGS_boot.bin += -n $(shell $(obj)/../tools/atmel_pmecc_params)
|
|
|
|
boot.bin: $(obj)/../tools/atmel_pmecc_params
|
|
endif
|
|
|
|
boot.bin: $(obj)/u-boot-spl.bin
|
|
$(call if_changed,mkimage)
|
|
else
|
|
MKIMAGEFLAGS_boot.bin = -T zynqimage
|
|
|
|
spl/boot.bin: $(obj)/u-boot-spl-dtb.bin
|
|
$(call if_changed,mkimage)
|
|
endif
|
|
|
|
ALL-y += $(obj)/$(SPL_BIN).bin $(obj)/$(SPL_BIN).cfg
|
|
|
|
ifdef CONFIG_SPL_OF_CONTROL
|
|
ALL-$(CONFIG_OF_SEPARATE) += $(obj)/$(SPL_BIN)-pad.bin $(obj)/$(SPL_BIN)-dtb.bin
|
|
endif
|
|
|
|
ifdef CONFIG_SAMSUNG
|
|
ALL-y += $(obj)/$(BOARD)-spl.bin
|
|
endif
|
|
|
|
ifdef CONFIG_ARCH_SOCFPGA
|
|
ALL-y += $(obj)/$(SPL_BIN)-dtb.sfp
|
|
endif
|
|
|
|
ifdef CONFIG_SUNXI
|
|
ALL-y += $(obj)/sunxi-spl.bin
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SYS_SOC),"at91")
|
|
ALL-y += boot.bin
|
|
endif
|
|
|
|
ifdef CONFIG_ARCH_ZYNQ
|
|
ALL-y += $(obj)/boot.bin
|
|
endif
|
|
|
|
all: $(ALL-y)
|
|
|
|
quiet_cmd_cat = CAT $@
|
|
cmd_cat = cat $(filter-out $(PHONY), $^) > $@
|
|
|
|
$(obj)/$(SPL_BIN)-dtb.bin: $(obj)/$(SPL_BIN).bin $(obj)/$(SPL_BIN)-pad.bin \
|
|
$(obj)/$(SPL_BIN).dtb FORCE
|
|
$(call if_changed,cat)
|
|
|
|
# Create a file that pads from the end of u-boot-spl.bin to bss_end
|
|
$(obj)/$(SPL_BIN)-pad.bin: $(obj)/$(SPL_BIN)
|
|
@bss_size_str=$(shell $(NM) $< | awk 'BEGIN {size = 0} /__bss_size/ {size = $$1} END {print "ibase=16; " toupper(size)}' | bc); \
|
|
dd if=/dev/zero of=$@ bs=1 count=$${bss_size_str} 2>/dev/null;
|
|
|
|
# Pass the original device tree file through fdtgrep twice. The first pass
|
|
# removes any unwanted nodes (i.e. those which don't have the
|
|
# 'u-boot,dm-pre-reloc' property and thus are not needed by SPL. The second
|
|
# pass removes various unused properties from the remaining nodes.
|
|
# The output is typically a much smaller device tree file.
|
|
quiet_cmd_fdtgrep = FDTGREP $@
|
|
cmd_fdtgrep = $(objtree)/tools/fdtgrep -b u-boot,dm-pre-reloc -RT $< \
|
|
-n /chosen -O dtb | \
|
|
$(objtree)/tools/fdtgrep -r -O dtb - -o $@ \
|
|
$(addprefix -P ,$(subst $\",,$(CONFIG_OF_SPL_REMOVE_PROPS)))
|
|
|
|
$(obj)/$(SPL_BIN).dtb: dts/dt.dtb
|
|
$(call cmd,fdtgrep)
|
|
|
|
quiet_cmd_cpp_cfg = CFG $@
|
|
cmd_cpp_cfg = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
|
|
-DDO_DEPS_ONLY -D__ASSEMBLY__ -x assembler-with-cpp -P -dM -E -o $@ $<
|
|
|
|
$(obj)/$(SPL_BIN).cfg: include/config.h
|
|
$(call if_changed,cpp_cfg)
|
|
|
|
ifdef CONFIG_SAMSUNG
|
|
ifdef CONFIG_VAR_SIZE_SPL
|
|
VAR_SIZE_PARAM = --vs
|
|
else
|
|
VAR_SIZE_PARAM =
|
|
endif
|
|
$(obj)/$(BOARD)-spl.bin: $(obj)/u-boot-spl.bin
|
|
$(if $(wildcard $(objtree)/spl/board/samsung/$(BOARD)/tools/mk$(BOARD)spl),\
|
|
$(objtree)/spl/board/samsung/$(BOARD)/tools/mk$(BOARD)spl,\
|
|
$(objtree)/tools/mkexynosspl) $(VAR_SIZE_PARAM) $< $@
|
|
endif
|
|
|
|
quiet_cmd_objcopy = OBJCOPY $@
|
|
cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
|
|
|
|
OBJCOPYFLAGS_$(SPL_BIN).bin = $(SPL_OBJCFLAGS) -O binary
|
|
|
|
$(obj)/$(SPL_BIN).bin: $(obj)/$(SPL_BIN) FORCE
|
|
$(call if_changed,objcopy)
|
|
|
|
LDFLAGS_$(SPL_BIN) += -T u-boot-spl.lds $(LDFLAGS_FINAL)
|
|
ifneq ($(CONFIG_SPL_TEXT_BASE),)
|
|
LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_SPL_TEXT_BASE)
|
|
endif
|
|
|
|
ifdef CONFIG_ARCH_SOCFPGA
|
|
MKIMAGEFLAGS_$(SPL_BIN)-dtb.sfp = -T socfpgaimage
|
|
$(obj)/$(SPL_BIN)-dtb.sfp: $(obj)/$(SPL_BIN)-dtb.bin FORCE
|
|
$(call if_changed,mkimage)
|
|
endif
|
|
|
|
ifdef CONFIG_SUNXI
|
|
quiet_cmd_mksunxiboot = MKSUNXI $@
|
|
cmd_mksunxiboot = $(objtree)/tools/mksunxiboot $< $@
|
|
$(obj)/sunxi-spl.bin: $(obj)/$(SPL_BIN).bin
|
|
$(call if_changed,mksunxiboot)
|
|
endif
|
|
|
|
quiet_cmd_u-boot-spl = LD $@
|
|
cmd_u-boot-spl = (cd $(obj) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \
|
|
$(patsubst $(obj)/%,%,$(u-boot-spl-init)) --start-group \
|
|
$(patsubst $(obj)/%,%,$(u-boot-spl-main)) --end-group \
|
|
$(PLATFORM_LIBS) -Map $(SPL_BIN).map -o $(SPL_BIN))
|
|
|
|
$(obj)/$(SPL_BIN): $(u-boot-spl-init) $(u-boot-spl-main) $(obj)/u-boot-spl.lds FORCE
|
|
$(call if_changed,u-boot-spl)
|
|
|
|
$(sort $(u-boot-spl-init) $(u-boot-spl-main)): $(u-boot-spl-dirs) ;
|
|
|
|
PHONY += $(u-boot-spl-dirs)
|
|
$(u-boot-spl-dirs):
|
|
$(Q)$(MAKE) $(build)=$@
|
|
|
|
quiet_cmd_cpp_lds = LDS $@
|
|
cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
|
|
-D__ASSEMBLY__ -x assembler-with-cpp -P -o $@ $<
|
|
|
|
$(obj)/u-boot-spl.lds: $(LDSCRIPT) FORCE
|
|
$(call if_changed_dep,cpp_lds)
|
|
|
|
# read all saved command lines
|
|
|
|
targets := $(wildcard $(sort $(targets)))
|
|
cmd_files := $(wildcard $(obj)/.*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
|
|
|
|
ifneq ($(cmd_files),)
|
|
$(cmd_files): ; # Do not try to update included dependency files
|
|
include $(cmd_files)
|
|
endif
|
|
|
|
PHONY += FORCE
|
|
FORCE:
|
|
|
|
# Declare the contents of the .PHONY variable as phony. We keep that
|
|
# information in a variable so we can use it in if_changed and friends.
|
|
.PHONY: $(PHONY)
|