mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-17 15:38:51 +09:00
![Tom Rini](/assets/img/avatar_default.png)
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
644 lines
15 KiB
C
644 lines
15 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2005-2007 by Texas Instruments
|
|
* Some code has been taken from tusb6010.c
|
|
* Copyrights for that are attributable to:
|
|
* Copyright (C) 2006 Nokia Corporation
|
|
* Tony Lindgren <tony@atomide.com>
|
|
*
|
|
* This file is part of the Inventra Controller Driver for Linux.
|
|
*/
|
|
#ifndef __UBOOT__
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/init.h>
|
|
#include <linux/list.h>
|
|
#include <linux/io.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/err.h>
|
|
#include <linux/usb/musb-omap.h>
|
|
#else
|
|
#include <common.h>
|
|
#include <asm/omap_common.h>
|
|
#include <asm/omap_musb.h>
|
|
#include <twl4030.h>
|
|
#include <twl6030.h>
|
|
#include "linux-compat.h"
|
|
#endif
|
|
|
|
#include "musb_core.h"
|
|
#include "omap2430.h"
|
|
|
|
#ifndef __UBOOT__
|
|
struct omap2430_glue {
|
|
struct device *dev;
|
|
struct platform_device *musb;
|
|
enum omap_musb_vbus_id_status status;
|
|
struct work_struct omap_musb_mailbox_work;
|
|
};
|
|
#define glue_to_musb(g) platform_get_drvdata(g->musb)
|
|
|
|
struct omap2430_glue *_glue;
|
|
|
|
static struct timer_list musb_idle_timer;
|
|
|
|
static void musb_do_idle(unsigned long _musb)
|
|
{
|
|
struct musb *musb = (void *)_musb;
|
|
unsigned long flags;
|
|
u8 power;
|
|
u8 devctl;
|
|
|
|
spin_lock_irqsave(&musb->lock, flags);
|
|
|
|
switch (musb->xceiv->state) {
|
|
case OTG_STATE_A_WAIT_BCON:
|
|
|
|
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
|
|
if (devctl & MUSB_DEVCTL_BDEVICE) {
|
|
musb->xceiv->state = OTG_STATE_B_IDLE;
|
|
MUSB_DEV_MODE(musb);
|
|
} else {
|
|
musb->xceiv->state = OTG_STATE_A_IDLE;
|
|
MUSB_HST_MODE(musb);
|
|
}
|
|
break;
|
|
case OTG_STATE_A_SUSPEND:
|
|
/* finish RESUME signaling? */
|
|
if (musb->port1_status & MUSB_PORT_STAT_RESUME) {
|
|
power = musb_readb(musb->mregs, MUSB_POWER);
|
|
power &= ~MUSB_POWER_RESUME;
|
|
dev_dbg(musb->controller, "root port resume stopped, power %02x\n", power);
|
|
musb_writeb(musb->mregs, MUSB_POWER, power);
|
|
musb->is_active = 1;
|
|
musb->port1_status &= ~(USB_PORT_STAT_SUSPEND
|
|
| MUSB_PORT_STAT_RESUME);
|
|
musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
|
|
usb_hcd_poll_rh_status(musb_to_hcd(musb));
|
|
/* NOTE: it might really be A_WAIT_BCON ... */
|
|
musb->xceiv->state = OTG_STATE_A_HOST;
|
|
}
|
|
break;
|
|
case OTG_STATE_A_HOST:
|
|
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
|
|
if (devctl & MUSB_DEVCTL_BDEVICE)
|
|
musb->xceiv->state = OTG_STATE_B_IDLE;
|
|
else
|
|
musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
|
|
default:
|
|
break;
|
|
}
|
|
spin_unlock_irqrestore(&musb->lock, flags);
|
|
}
|
|
|
|
|
|
static void omap2430_musb_try_idle(struct musb *musb, unsigned long timeout)
|
|
{
|
|
unsigned long default_timeout = jiffies + msecs_to_jiffies(3);
|
|
static unsigned long last_timer;
|
|
|
|
if (timeout == 0)
|
|
timeout = default_timeout;
|
|
|
|
/* Never idle if active, or when VBUS timeout is not set as host */
|
|
if (musb->is_active || ((musb->a_wait_bcon == 0)
|
|
&& (musb->xceiv->state == OTG_STATE_A_WAIT_BCON))) {
|
|
dev_dbg(musb->controller, "%s active, deleting timer\n",
|
|
otg_state_string(musb->xceiv->state));
|
|
del_timer(&musb_idle_timer);
|
|
last_timer = jiffies;
|
|
return;
|
|
}
|
|
|
|
if (time_after(last_timer, timeout)) {
|
|
if (!timer_pending(&musb_idle_timer))
|
|
last_timer = timeout;
|
|
else {
|
|
dev_dbg(musb->controller, "Longer idle timer already pending, ignoring\n");
|
|
return;
|
|
}
|
|
}
|
|
last_timer = timeout;
|
|
|
|
dev_dbg(musb->controller, "%s inactive, for idle timer for %lu ms\n",
|
|
otg_state_string(musb->xceiv->state),
|
|
(unsigned long)jiffies_to_msecs(timeout - jiffies));
|
|
mod_timer(&musb_idle_timer, timeout);
|
|
}
|
|
|
|
static void omap2430_musb_set_vbus(struct musb *musb, int is_on)
|
|
{
|
|
struct usb_otg *otg = musb->xceiv->otg;
|
|
u8 devctl;
|
|
unsigned long timeout = jiffies + msecs_to_jiffies(1000);
|
|
int ret = 1;
|
|
/* HDRC controls CPEN, but beware current surges during device
|
|
* connect. They can trigger transient overcurrent conditions
|
|
* that must be ignored.
|
|
*/
|
|
|
|
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
|
|
|
|
if (is_on) {
|
|
if (musb->xceiv->state == OTG_STATE_A_IDLE) {
|
|
/* start the session */
|
|
devctl |= MUSB_DEVCTL_SESSION;
|
|
musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
|
|
/*
|
|
* Wait for the musb to set as A device to enable the
|
|
* VBUS
|
|
*/
|
|
while (musb_readb(musb->mregs, MUSB_DEVCTL) & 0x80) {
|
|
|
|
cpu_relax();
|
|
|
|
if (time_after(jiffies, timeout)) {
|
|
dev_err(musb->controller,
|
|
"configured as A device timeout");
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (ret && otg->set_vbus)
|
|
otg_set_vbus(otg, 1);
|
|
} else {
|
|
musb->is_active = 1;
|
|
otg->default_a = 1;
|
|
musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
|
|
devctl |= MUSB_DEVCTL_SESSION;
|
|
MUSB_HST_MODE(musb);
|
|
}
|
|
} else {
|
|
musb->is_active = 0;
|
|
|
|
/* NOTE: we're skipping A_WAIT_VFALL -> A_IDLE and
|
|
* jumping right to B_IDLE...
|
|
*/
|
|
|
|
otg->default_a = 0;
|
|
musb->xceiv->state = OTG_STATE_B_IDLE;
|
|
devctl &= ~MUSB_DEVCTL_SESSION;
|
|
|
|
MUSB_DEV_MODE(musb);
|
|
}
|
|
musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
|
|
|
|
dev_dbg(musb->controller, "VBUS %s, devctl %02x "
|
|
/* otg %3x conf %08x prcm %08x */ "\n",
|
|
otg_state_string(musb->xceiv->state),
|
|
musb_readb(musb->mregs, MUSB_DEVCTL));
|
|
}
|
|
|
|
static int omap2430_musb_set_mode(struct musb *musb, u8 musb_mode)
|
|
{
|
|
u8 devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
|
|
|
|
devctl |= MUSB_DEVCTL_SESSION;
|
|
musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static inline void omap2430_low_level_exit(struct musb *musb)
|
|
{
|
|
u32 l;
|
|
|
|
/* in any role */
|
|
l = musb_readl(musb->mregs, OTG_FORCESTDBY);
|
|
l |= ENABLEFORCE; /* enable MSTANDBY */
|
|
musb_writel(musb->mregs, OTG_FORCESTDBY, l);
|
|
}
|
|
|
|
static inline void omap2430_low_level_init(struct musb *musb)
|
|
{
|
|
u32 l;
|
|
|
|
l = musb_readl(musb->mregs, OTG_FORCESTDBY);
|
|
l &= ~ENABLEFORCE; /* disable MSTANDBY */
|
|
musb_writel(musb->mregs, OTG_FORCESTDBY, l);
|
|
}
|
|
|
|
#ifndef __UBOOT__
|
|
void omap_musb_mailbox(enum omap_musb_vbus_id_status status)
|
|
{
|
|
struct omap2430_glue *glue = _glue;
|
|
struct musb *musb = glue_to_musb(glue);
|
|
|
|
glue->status = status;
|
|
if (!musb) {
|
|
dev_err(glue->dev, "musb core is not yet ready\n");
|
|
return;
|
|
}
|
|
|
|
schedule_work(&glue->omap_musb_mailbox_work);
|
|
}
|
|
EXPORT_SYMBOL_GPL(omap_musb_mailbox);
|
|
|
|
static void omap_musb_set_mailbox(struct omap2430_glue *glue)
|
|
{
|
|
struct musb *musb = glue_to_musb(glue);
|
|
struct device *dev = musb->controller;
|
|
struct musb_hdrc_platform_data *pdata = dev->platform_data;
|
|
struct omap_musb_board_data *data = pdata->board_data;
|
|
struct usb_otg *otg = musb->xceiv->otg;
|
|
|
|
switch (glue->status) {
|
|
case OMAP_MUSB_ID_GROUND:
|
|
dev_dbg(dev, "ID GND\n");
|
|
|
|
otg->default_a = true;
|
|
musb->xceiv->state = OTG_STATE_A_IDLE;
|
|
musb->xceiv->last_event = USB_EVENT_ID;
|
|
if (!is_otg_enabled(musb) || musb->gadget_driver) {
|
|
pm_runtime_get_sync(dev);
|
|
usb_phy_init(musb->xceiv);
|
|
omap2430_musb_set_vbus(musb, 1);
|
|
}
|
|
break;
|
|
|
|
case OMAP_MUSB_VBUS_VALID:
|
|
dev_dbg(dev, "VBUS Connect\n");
|
|
|
|
otg->default_a = false;
|
|
musb->xceiv->state = OTG_STATE_B_IDLE;
|
|
musb->xceiv->last_event = USB_EVENT_VBUS;
|
|
if (musb->gadget_driver)
|
|
pm_runtime_get_sync(dev);
|
|
usb_phy_init(musb->xceiv);
|
|
break;
|
|
|
|
case OMAP_MUSB_ID_FLOAT:
|
|
case OMAP_MUSB_VBUS_OFF:
|
|
dev_dbg(dev, "VBUS Disconnect\n");
|
|
|
|
musb->xceiv->last_event = USB_EVENT_NONE;
|
|
if (is_otg_enabled(musb) || is_peripheral_enabled(musb))
|
|
if (musb->gadget_driver) {
|
|
pm_runtime_mark_last_busy(dev);
|
|
pm_runtime_put_autosuspend(dev);
|
|
}
|
|
|
|
if (data->interface_type == MUSB_INTERFACE_UTMI) {
|
|
if (musb->xceiv->otg->set_vbus)
|
|
otg_set_vbus(musb->xceiv->otg, 0);
|
|
}
|
|
usb_phy_shutdown(musb->xceiv);
|
|
break;
|
|
default:
|
|
dev_dbg(dev, "ID float\n");
|
|
}
|
|
}
|
|
|
|
|
|
static void omap_musb_mailbox_work(struct work_struct *mailbox_work)
|
|
{
|
|
struct omap2430_glue *glue = container_of(mailbox_work,
|
|
struct omap2430_glue, omap_musb_mailbox_work);
|
|
omap_musb_set_mailbox(glue);
|
|
}
|
|
#endif
|
|
|
|
static int omap2430_musb_init(struct musb *musb)
|
|
{
|
|
u32 l;
|
|
int status = 0;
|
|
unsigned long int start;
|
|
#ifndef __UBOOT__
|
|
struct device *dev = musb->controller;
|
|
struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
|
|
struct musb_hdrc_platform_data *plat = dev->platform_data;
|
|
struct omap_musb_board_data *data = plat->board_data;
|
|
#else
|
|
struct omap_musb_board_data *data =
|
|
(struct omap_musb_board_data *)musb->controller;
|
|
#endif
|
|
|
|
/* Reset the controller */
|
|
musb_writel(musb->mregs, OTG_SYSCONFIG, SOFTRST);
|
|
|
|
start = get_timer(0);
|
|
|
|
while (1) {
|
|
l = musb_readl(musb->mregs, OTG_SYSCONFIG);
|
|
if ((l & SOFTRST) == 0)
|
|
break;
|
|
|
|
if (get_timer(start) > (CONFIG_SYS_HZ / 1000)) {
|
|
dev_err(musb->controller, "MUSB reset is taking too long\n");
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
#ifndef __UBOOT__
|
|
/* We require some kind of external transceiver, hooked
|
|
* up through ULPI. TWL4030-family PMICs include one,
|
|
* which needs a driver, drivers aren't always needed.
|
|
*/
|
|
musb->xceiv = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
|
|
if (IS_ERR_OR_NULL(musb->xceiv)) {
|
|
pr_err("HS USB OTG: no transceiver configured\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
status = pm_runtime_get_sync(dev);
|
|
if (status < 0) {
|
|
dev_err(dev, "pm_runtime_get_sync FAILED %d\n", status);
|
|
goto err1;
|
|
}
|
|
#endif
|
|
|
|
l = musb_readl(musb->mregs, OTG_INTERFSEL);
|
|
|
|
if (data->interface_type == MUSB_INTERFACE_UTMI) {
|
|
/* OMAP4 uses Internal PHY GS70 which uses UTMI interface */
|
|
l &= ~ULPI_12PIN; /* Disable ULPI */
|
|
l |= UTMI_8BIT; /* Enable UTMI */
|
|
} else {
|
|
l |= ULPI_12PIN;
|
|
}
|
|
|
|
musb_writel(musb->mregs, OTG_INTERFSEL, l);
|
|
|
|
pr_debug("HS USB OTG: revision 0x%x, sysconfig 0x%02x, "
|
|
"sysstatus 0x%x, intrfsel 0x%x, simenable 0x%x\n",
|
|
musb_readl(musb->mregs, OTG_REVISION),
|
|
musb_readl(musb->mregs, OTG_SYSCONFIG),
|
|
musb_readl(musb->mregs, OTG_SYSSTATUS),
|
|
musb_readl(musb->mregs, OTG_INTERFSEL),
|
|
musb_readl(musb->mregs, OTG_SIMENABLE));
|
|
|
|
#ifndef __UBOOT__
|
|
setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
|
|
|
|
if (glue->status != OMAP_MUSB_UNKNOWN)
|
|
omap_musb_set_mailbox(glue);
|
|
|
|
pm_runtime_put_noidle(musb->controller);
|
|
#endif
|
|
return 0;
|
|
|
|
err1:
|
|
return status;
|
|
}
|
|
|
|
#ifndef __UBOOT__
|
|
static void omap2430_musb_enable(struct musb *musb)
|
|
#else
|
|
static int omap2430_musb_enable(struct musb *musb)
|
|
#endif
|
|
{
|
|
#ifndef __UBOOT__
|
|
u8 devctl;
|
|
unsigned long timeout = jiffies + msecs_to_jiffies(1000);
|
|
struct device *dev = musb->controller;
|
|
struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
|
|
struct musb_hdrc_platform_data *pdata = dev->platform_data;
|
|
struct omap_musb_board_data *data = pdata->board_data;
|
|
|
|
switch (glue->status) {
|
|
|
|
case OMAP_MUSB_ID_GROUND:
|
|
usb_phy_init(musb->xceiv);
|
|
if (data->interface_type != MUSB_INTERFACE_UTMI)
|
|
break;
|
|
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
|
|
/* start the session */
|
|
devctl |= MUSB_DEVCTL_SESSION;
|
|
musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
|
|
while (musb_readb(musb->mregs, MUSB_DEVCTL) &
|
|
MUSB_DEVCTL_BDEVICE) {
|
|
cpu_relax();
|
|
|
|
if (time_after(jiffies, timeout)) {
|
|
dev_err(dev, "configured as A device timeout");
|
|
break;
|
|
}
|
|
}
|
|
break;
|
|
|
|
case OMAP_MUSB_VBUS_VALID:
|
|
usb_phy_init(musb->xceiv);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
#else
|
|
#ifdef CONFIG_TWL4030_USB
|
|
if (twl4030_usb_ulpi_init()) {
|
|
serial_printf("ERROR: %s Could not initialize PHY\n",
|
|
__PRETTY_FUNCTION__);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_TWL6030_POWER
|
|
twl6030_usb_device_settings();
|
|
#endif
|
|
|
|
#ifdef CONFIG_OMAP44XX
|
|
u32 *usbotghs_control = (u32 *)((*ctrl)->control_usbotghs_ctrl);
|
|
*usbotghs_control = USBOTGHS_CONTROL_AVALID |
|
|
USBOTGHS_CONTROL_VBUSVALID | USBOTGHS_CONTROL_IDDIG;
|
|
#endif
|
|
|
|
return 0;
|
|
#endif
|
|
}
|
|
|
|
static void omap2430_musb_disable(struct musb *musb)
|
|
{
|
|
#ifndef __UBOOT__
|
|
struct device *dev = musb->controller;
|
|
struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
|
|
|
|
if (glue->status != OMAP_MUSB_UNKNOWN)
|
|
usb_phy_shutdown(musb->xceiv);
|
|
#endif
|
|
}
|
|
|
|
static int omap2430_musb_exit(struct musb *musb)
|
|
{
|
|
del_timer_sync(&musb_idle_timer);
|
|
|
|
omap2430_low_level_exit(musb);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifndef __UBOOT__
|
|
static const struct musb_platform_ops omap2430_ops = {
|
|
#else
|
|
const struct musb_platform_ops omap2430_ops = {
|
|
#endif
|
|
.init = omap2430_musb_init,
|
|
.exit = omap2430_musb_exit,
|
|
|
|
#ifndef __UBOOT__
|
|
.set_mode = omap2430_musb_set_mode,
|
|
.try_idle = omap2430_musb_try_idle,
|
|
|
|
.set_vbus = omap2430_musb_set_vbus,
|
|
#endif
|
|
|
|
.enable = omap2430_musb_enable,
|
|
.disable = omap2430_musb_disable,
|
|
};
|
|
|
|
#ifndef __UBOOT__
|
|
static u64 omap2430_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static int __devinit omap2430_probe(struct platform_device *pdev)
|
|
{
|
|
struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data;
|
|
struct platform_device *musb;
|
|
struct omap2430_glue *glue;
|
|
int ret = -ENOMEM;
|
|
|
|
glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
|
|
if (!glue) {
|
|
dev_err(&pdev->dev, "failed to allocate glue context\n");
|
|
goto err0;
|
|
}
|
|
|
|
musb = platform_device_alloc("musb-hdrc", -1);
|
|
if (!musb) {
|
|
dev_err(&pdev->dev, "failed to allocate musb device\n");
|
|
goto err0;
|
|
}
|
|
|
|
musb->dev.parent = &pdev->dev;
|
|
musb->dev.dma_mask = &omap2430_dmamask;
|
|
musb->dev.coherent_dma_mask = omap2430_dmamask;
|
|
|
|
glue->dev = &pdev->dev;
|
|
glue->musb = musb;
|
|
glue->status = OMAP_MUSB_UNKNOWN;
|
|
|
|
pdata->platform_ops = &omap2430_ops;
|
|
|
|
platform_set_drvdata(pdev, glue);
|
|
|
|
/*
|
|
* REVISIT if we ever have two instances of the wrapper, we will be
|
|
* in big trouble
|
|
*/
|
|
_glue = glue;
|
|
|
|
INIT_WORK(&glue->omap_musb_mailbox_work, omap_musb_mailbox_work);
|
|
|
|
ret = platform_device_add_resources(musb, pdev->resource,
|
|
pdev->num_resources);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to add resources\n");
|
|
goto err1;
|
|
}
|
|
|
|
ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to add platform_data\n");
|
|
goto err1;
|
|
}
|
|
|
|
pm_runtime_enable(&pdev->dev);
|
|
|
|
ret = platform_device_add(musb);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to register musb device\n");
|
|
goto err1;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err1:
|
|
platform_device_put(musb);
|
|
|
|
err0:
|
|
return ret;
|
|
}
|
|
|
|
static int __devexit omap2430_remove(struct platform_device *pdev)
|
|
{
|
|
struct omap2430_glue *glue = platform_get_drvdata(pdev);
|
|
|
|
cancel_work_sync(&glue->omap_musb_mailbox_work);
|
|
platform_device_del(glue->musb);
|
|
platform_device_put(glue->musb);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static int omap2430_runtime_suspend(struct device *dev)
|
|
{
|
|
struct omap2430_glue *glue = dev_get_drvdata(dev);
|
|
struct musb *musb = glue_to_musb(glue);
|
|
|
|
if (musb) {
|
|
musb->context.otg_interfsel = musb_readl(musb->mregs,
|
|
OTG_INTERFSEL);
|
|
|
|
omap2430_low_level_exit(musb);
|
|
usb_phy_set_suspend(musb->xceiv, 1);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap2430_runtime_resume(struct device *dev)
|
|
{
|
|
struct omap2430_glue *glue = dev_get_drvdata(dev);
|
|
struct musb *musb = glue_to_musb(glue);
|
|
|
|
if (musb) {
|
|
omap2430_low_level_init(musb);
|
|
musb_writel(musb->mregs, OTG_INTERFSEL,
|
|
musb->context.otg_interfsel);
|
|
|
|
usb_phy_set_suspend(musb->xceiv, 0);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct dev_pm_ops omap2430_pm_ops = {
|
|
.runtime_suspend = omap2430_runtime_suspend,
|
|
.runtime_resume = omap2430_runtime_resume,
|
|
};
|
|
|
|
#define DEV_PM_OPS (&omap2430_pm_ops)
|
|
#else
|
|
#define DEV_PM_OPS NULL
|
|
#endif
|
|
|
|
static struct platform_driver omap2430_driver = {
|
|
.probe = omap2430_probe,
|
|
.remove = __devexit_p(omap2430_remove),
|
|
.driver = {
|
|
.name = "musb-omap2430",
|
|
.pm = DEV_PM_OPS,
|
|
},
|
|
};
|
|
|
|
MODULE_DESCRIPTION("OMAP2PLUS MUSB Glue Layer");
|
|
MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
|
|
MODULE_LICENSE("GPL v2");
|
|
|
|
static int __init omap2430_init(void)
|
|
{
|
|
return platform_driver_register(&omap2430_driver);
|
|
}
|
|
subsys_initcall(omap2430_init);
|
|
|
|
static void __exit omap2430_exit(void)
|
|
{
|
|
platform_driver_unregister(&omap2430_driver);
|
|
}
|
|
module_exit(omap2430_exit);
|
|
#endif
|