Peng Fan 1f516faa45 ARM: imx6: disable bandgap self-bias after boot ... The self-bias circuit is used by the bandgap during startup. Once the bandgap has stabilized, the self-bias circuit should be disabled for best noise performance of analog blocks. Also this bit should be disabled before the chip enters STOP mode or when ever the regular bandgap is disabled. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ranjani Vaidyanathan <Ranjani.Vaidyanathan@freescale.com>		2015-02-17 10:42:53 +01:00
..
clock.h	arm:mx6sx add QSPI support	2014-12-31 14:52:32 +05:30
crm_regs.h	ARM: imx6: disable bandgap self-bias after boot	2015-02-17 10:42:53 +01:00
gpio.h	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
hab.h	imx6sx: Fix i.MX6SX HAB api function table offset	2014-10-01 09:10:28 +02:00
imx-regs.h	imx: mx6: Fixed AIPS3 base address issue	2015-02-10 12:48:49 +01:00
iomux.h	pcie_imx: Add mx6solox support	2014-09-09 17:24:49 +02:00
mx6-ddr.h	imx:mx6sx add dram io configure for mx6sx	2015-01-22 09:55:47 +01:00
mx6-pins.h	mx6sx: Add pin definitions	2014-07-10 15:29:16 +02:00
mx6dl_pins.h	i.MX6DL/S: add drive-strength back to pads DISP0_DAT2/DAT10	2014-07-10 15:23:56 +02:00
mx6dl-ddr.h	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
mx6q_pins.h	imx6 SION bit has to be on for the pins that are used as ENET_REF_CLK	2014-02-19 10:57:25 +01:00
mx6q-ddr.h	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
mx6sl_pins.h	imx:mx6slevk add board level support for usb	2014-11-14 20:56:58 +01:00
mx6sx_pins.h	mx6sx: Add pin definitions	2014-07-10 15:29:16 +02:00
mx6sx-ddr.h	mx6: Add support for the mx6solox variant	2014-07-10 15:29:16 +02:00
mxc_hdmi.h	Merge git://git.denx.de/u-boot-arm	2013-07-31 11:30:38 +02:00
sys_proto.h	imx: consolidate set_chipselect_size function	2014-11-20 10:30:19 +01:00