mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-17 15:38:51 +09:00
![Jeremy Boone](/assets/img/avatar_default.png)
Ensure that the Infineon I2C and SPI TPM driver performs adequate validation of the length extracted from the TPM response header. This patch prevents integer underflow when the length was too small, which could lead to memory corruption. Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust>
639 lines
15 KiB
C
639 lines
15 KiB
C
/*
|
|
* Copyright (C) 2011 Infineon Technologies
|
|
*
|
|
* Authors:
|
|
* Peter Huewe <huewe.external@infineon.com>
|
|
*
|
|
* Description:
|
|
* Device driver for TCG/TCPA TPM (trusted platform module).
|
|
* Specifications at www.trustedcomputinggroup.org
|
|
*
|
|
* This device driver implements the TPM interface as defined in
|
|
* the TCG TPM Interface Spec version 1.2, revision 1.0 and the
|
|
* Infineon I2C Protocol Stack Specification v0.20.
|
|
*
|
|
* It is based on the Linux kernel driver tpm.c from Leendert van
|
|
* Dorn, Dave Safford, Reiner Sailer, and Kyleen Hall.
|
|
*
|
|
* Version: 2.1.1
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <fdtdec.h>
|
|
#include <i2c.h>
|
|
#include <tpm.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/compiler.h>
|
|
#include <linux/types.h>
|
|
#include <linux/unaligned/be_byteshift.h>
|
|
|
|
#include "tpm_tis.h"
|
|
#include "tpm_internal.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
enum i2c_chip_type {
|
|
SLB9635,
|
|
SLB9645,
|
|
UNKNOWN,
|
|
};
|
|
|
|
/* expected value for DIDVID register */
|
|
#define TPM_TIS_I2C_DID_VID_9635 0x000b15d1L
|
|
#define TPM_TIS_I2C_DID_VID_9645 0x001a15d1L
|
|
|
|
static const char * const chip_name[] = {
|
|
[SLB9635] = "slb9635tt",
|
|
[SLB9645] = "slb9645tt",
|
|
[UNKNOWN] = "unknown/fallback to slb9635",
|
|
};
|
|
|
|
#define TPM_ACCESS(l) (0x0000 | ((l) << 4))
|
|
#define TPM_STS(l) (0x0001 | ((l) << 4))
|
|
#define TPM_DATA_FIFO(l) (0x0005 | ((l) << 4))
|
|
#define TPM_DID_VID(l) (0x0006 | ((l) << 4))
|
|
|
|
/*
|
|
* tpm_tis_i2c_read() - read from TPM register
|
|
* @addr: register address to read from
|
|
* @buffer: provided by caller
|
|
* @len: number of bytes to read
|
|
*
|
|
* Read len bytes from TPM register and put them into
|
|
* buffer (little-endian format, i.e. first byte is put into buffer[0]).
|
|
*
|
|
* NOTE: TPM is big-endian for multi-byte values. Multi-byte
|
|
* values have to be swapped.
|
|
*
|
|
* Return -EIO on error, 0 on success.
|
|
*/
|
|
static int tpm_tis_i2c_read(struct udevice *dev, u8 addr, u8 *buffer,
|
|
size_t len)
|
|
{
|
|
struct tpm_chip *chip = dev_get_priv(dev);
|
|
int rc;
|
|
int count;
|
|
uint32_t addrbuf = addr;
|
|
|
|
if ((chip->chip_type == SLB9635) || (chip->chip_type == UNKNOWN)) {
|
|
/* slb9635 protocol should work in both cases */
|
|
for (count = 0; count < MAX_COUNT; count++) {
|
|
rc = dm_i2c_write(dev, 0, (uchar *)&addrbuf, 1);
|
|
if (rc == 0)
|
|
break; /* Success, break to skip sleep */
|
|
udelay(SLEEP_DURATION_US);
|
|
}
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* After the TPM has successfully received the register address
|
|
* it needs some time, thus we're sleeping here again, before
|
|
* retrieving the data
|
|
*/
|
|
for (count = 0; count < MAX_COUNT; count++) {
|
|
udelay(SLEEP_DURATION_US);
|
|
rc = dm_i2c_read(dev, 0, buffer, len);
|
|
if (rc == 0)
|
|
break; /* success, break to skip sleep */
|
|
}
|
|
} else {
|
|
/*
|
|
* Use a combined read for newer chips.
|
|
* Unfortunately the smbus functions are not suitable due to
|
|
* the 32 byte limit of the smbus.
|
|
* Retries should usually not be needed, but are kept just to
|
|
* be safe on the safe side.
|
|
*/
|
|
for (count = 0; count < MAX_COUNT; count++) {
|
|
rc = dm_i2c_read(dev, addr, buffer, len);
|
|
if (rc == 0)
|
|
break; /* break here to skip sleep */
|
|
udelay(SLEEP_DURATION_US);
|
|
}
|
|
}
|
|
|
|
/* Take care of 'guard time' */
|
|
udelay(SLEEP_DURATION_US);
|
|
if (rc)
|
|
return rc;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tpm_tis_i2c_write_generic(struct udevice *dev, u8 addr,
|
|
const u8 *buffer, size_t len,
|
|
unsigned int sleep_time_us, u8 max_count)
|
|
{
|
|
struct tpm_chip_priv *priv = dev_get_uclass_priv(dev);
|
|
struct tpm_chip *chip = dev_get_priv(dev);
|
|
int rc = 0;
|
|
int count;
|
|
|
|
if (chip->chip_type == SLB9635) {
|
|
/* Prepare send buffer to include the address */
|
|
priv->buf[0] = addr;
|
|
memcpy(&(priv->buf[1]), buffer, len);
|
|
buffer = priv->buf;
|
|
len++;
|
|
addr = 0;
|
|
}
|
|
|
|
for (count = 0; count < max_count; count++) {
|
|
rc = dm_i2c_write(dev, addr, buffer, len);
|
|
if (rc == 0)
|
|
break; /* Success, break to skip sleep */
|
|
udelay(sleep_time_us);
|
|
}
|
|
|
|
/* take care of 'guard time' */
|
|
udelay(sleep_time_us);
|
|
if (rc)
|
|
return rc;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* tpm_tis_i2c_write() - write to TPM register
|
|
* @addr: register address to write to
|
|
* @buffer: containing data to be written
|
|
* @len: number of bytes to write
|
|
*
|
|
* Write len bytes from provided buffer to TPM register (little
|
|
* endian format, i.e. buffer[0] is written as first byte).
|
|
*
|
|
* NOTE: TPM is big-endian for multi-byte values. Multi-byte
|
|
* values have to be swapped.
|
|
*
|
|
* NOTE: use this function instead of the tpm_tis_i2c_write_generic function.
|
|
*
|
|
* Return -EIO on error, 0 on success
|
|
*/
|
|
static int tpm_tis_i2c_write(struct udevice *dev, u8 addr, const u8 *buffer,
|
|
size_t len)
|
|
{
|
|
return tpm_tis_i2c_write_generic(dev, addr, buffer, len,
|
|
SLEEP_DURATION_US, MAX_COUNT);
|
|
}
|
|
|
|
/*
|
|
* This function is needed especially for the cleanup situation after
|
|
* sending TPM_READY
|
|
*/
|
|
static int tpm_tis_i2c_write_long(struct udevice *dev, u8 addr, u8 *buffer,
|
|
size_t len)
|
|
{
|
|
return tpm_tis_i2c_write_generic(dev, addr, buffer, len,
|
|
SLEEP_DURATION_LONG_US,
|
|
MAX_COUNT_LONG);
|
|
}
|
|
|
|
static int tpm_tis_i2c_check_locality(struct udevice *dev, int loc)
|
|
{
|
|
const u8 mask = TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID;
|
|
struct tpm_chip *chip = dev_get_priv(dev);
|
|
u8 buf;
|
|
int rc;
|
|
|
|
rc = tpm_tis_i2c_read(dev, TPM_ACCESS(loc), &buf, 1);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
if ((buf & mask) == mask) {
|
|
chip->locality = loc;
|
|
return loc;
|
|
}
|
|
|
|
return -ENOENT;
|
|
}
|
|
|
|
static void tpm_tis_i2c_release_locality(struct udevice *dev, int loc,
|
|
int force)
|
|
{
|
|
const u8 mask = TPM_ACCESS_REQUEST_PENDING | TPM_ACCESS_VALID;
|
|
u8 buf;
|
|
|
|
if (tpm_tis_i2c_read(dev, TPM_ACCESS(loc), &buf, 1) < 0)
|
|
return;
|
|
|
|
if (force || (buf & mask) == mask) {
|
|
buf = TPM_ACCESS_ACTIVE_LOCALITY;
|
|
tpm_tis_i2c_write(dev, TPM_ACCESS(loc), &buf, 1);
|
|
}
|
|
}
|
|
|
|
static int tpm_tis_i2c_request_locality(struct udevice *dev, int loc)
|
|
{
|
|
struct tpm_chip *chip = dev_get_priv(dev);
|
|
unsigned long start, stop;
|
|
u8 buf = TPM_ACCESS_REQUEST_USE;
|
|
int rc;
|
|
|
|
rc = tpm_tis_i2c_check_locality(dev, loc);
|
|
if (rc >= 0) {
|
|
debug("%s: Already have locality\n", __func__);
|
|
return loc; /* We already have the locality */
|
|
} else if (rc != -ENOENT) {
|
|
debug("%s: Failed to get locality: %d\n", __func__, rc);
|
|
return rc;
|
|
}
|
|
|
|
rc = tpm_tis_i2c_write(dev, TPM_ACCESS(loc), &buf, 1);
|
|
if (rc) {
|
|
debug("%s: Failed to write to TPM: %d\n", __func__, rc);
|
|
return rc;
|
|
}
|
|
|
|
/* Wait for burstcount */
|
|
start = get_timer(0);
|
|
stop = chip->timeout_a;
|
|
do {
|
|
rc = tpm_tis_i2c_check_locality(dev, loc);
|
|
if (rc >= 0) {
|
|
debug("%s: Have locality\n", __func__);
|
|
return loc;
|
|
} else if (rc != -ENOENT) {
|
|
debug("%s: Failed to get locality: %d\n", __func__, rc);
|
|
return rc;
|
|
}
|
|
mdelay(TPM_TIMEOUT_MS);
|
|
} while (get_timer(start) < stop);
|
|
debug("%s: Timeout getting locality: %d\n", __func__, rc);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static u8 tpm_tis_i2c_status(struct udevice *dev)
|
|
{
|
|
struct tpm_chip *chip = dev_get_priv(dev);
|
|
/* NOTE: Since i2c read may fail, return 0 in this case --> time-out */
|
|
u8 buf;
|
|
|
|
if (tpm_tis_i2c_read(dev, TPM_STS(chip->locality), &buf, 1) < 0)
|
|
return 0;
|
|
else
|
|
return buf;
|
|
}
|
|
|
|
static int tpm_tis_i2c_ready(struct udevice *dev)
|
|
{
|
|
struct tpm_chip *chip = dev_get_priv(dev);
|
|
int rc;
|
|
|
|
/* This causes the current command to be aborted */
|
|
u8 buf = TPM_STS_COMMAND_READY;
|
|
|
|
debug("%s\n", __func__);
|
|
rc = tpm_tis_i2c_write_long(dev, TPM_STS(chip->locality), &buf, 1);
|
|
if (rc)
|
|
debug("%s: rc=%d\n", __func__, rc);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static ssize_t tpm_tis_i2c_get_burstcount(struct udevice *dev)
|
|
{
|
|
struct tpm_chip *chip = dev_get_priv(dev);
|
|
unsigned long start, stop;
|
|
ssize_t burstcnt;
|
|
u8 addr, buf[3];
|
|
|
|
/* Wait for burstcount */
|
|
/* XXX: Which timeout value? Spec has 2 answers (c & d) */
|
|
start = get_timer(0);
|
|
stop = chip->timeout_d;
|
|
do {
|
|
/* Note: STS is little endian */
|
|
addr = TPM_STS(chip->locality) + 1;
|
|
if (tpm_tis_i2c_read(dev, addr, buf, 3) < 0)
|
|
burstcnt = 0;
|
|
else
|
|
burstcnt = (buf[2] << 16) + (buf[1] << 8) + buf[0];
|
|
|
|
if (burstcnt)
|
|
return burstcnt;
|
|
mdelay(TPM_TIMEOUT_MS);
|
|
} while (get_timer(start) < stop);
|
|
|
|
return -EBUSY;
|
|
}
|
|
|
|
static int tpm_tis_i2c_wait_for_stat(struct udevice *dev, u8 mask,
|
|
unsigned long timeout, int *status)
|
|
{
|
|
unsigned long start, stop;
|
|
|
|
/* Check current status */
|
|
*status = tpm_tis_i2c_status(dev);
|
|
if ((*status & mask) == mask)
|
|
return 0;
|
|
|
|
start = get_timer(0);
|
|
stop = timeout;
|
|
do {
|
|
mdelay(TPM_TIMEOUT_MS);
|
|
*status = tpm_tis_i2c_status(dev);
|
|
if ((*status & mask) == mask)
|
|
return 0;
|
|
} while (get_timer(start) < stop);
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int tpm_tis_i2c_recv_data(struct udevice *dev, u8 *buf, size_t count)
|
|
{
|
|
struct tpm_chip *chip = dev_get_priv(dev);
|
|
size_t size = 0;
|
|
ssize_t burstcnt;
|
|
int rc;
|
|
|
|
while (size < count) {
|
|
burstcnt = tpm_tis_i2c_get_burstcount(dev);
|
|
|
|
/* burstcount < 0 -> tpm is busy */
|
|
if (burstcnt < 0)
|
|
return burstcnt;
|
|
|
|
/* Limit received data to max left */
|
|
if (burstcnt > (count - size))
|
|
burstcnt = count - size;
|
|
|
|
rc = tpm_tis_i2c_read(dev, TPM_DATA_FIFO(chip->locality),
|
|
&(buf[size]), burstcnt);
|
|
if (rc == 0)
|
|
size += burstcnt;
|
|
}
|
|
|
|
return size;
|
|
}
|
|
|
|
static int tpm_tis_i2c_recv(struct udevice *dev, u8 *buf, size_t count)
|
|
{
|
|
struct tpm_chip *chip = dev_get_priv(dev);
|
|
int size = 0;
|
|
int status;
|
|
unsigned int expected;
|
|
int rc;
|
|
|
|
status = tpm_tis_i2c_status(dev);
|
|
if (status == TPM_STS_COMMAND_READY)
|
|
return -EINTR;
|
|
if ((status & (TPM_STS_DATA_AVAIL | TPM_STS_VALID)) !=
|
|
(TPM_STS_DATA_AVAIL | TPM_STS_VALID))
|
|
return -EAGAIN;
|
|
|
|
debug("...got it;\n");
|
|
|
|
/* Read first 10 bytes, including tag, paramsize, and result */
|
|
size = tpm_tis_i2c_recv_data(dev, buf, TPM_HEADER_SIZE);
|
|
if (size < TPM_HEADER_SIZE) {
|
|
debug("Unable to read header\n");
|
|
return size < 0 ? size : -EIO;
|
|
}
|
|
|
|
expected = get_unaligned_be32(buf + TPM_RSP_SIZE_BYTE);
|
|
if ((size_t)expected > count || (size_t)expected < TPM_HEADER_SIZE) {
|
|
debug("Error size=%x, expected=%x, count=%x\n", size, expected,
|
|
count);
|
|
return -ENOSPC;
|
|
}
|
|
|
|
size += tpm_tis_i2c_recv_data(dev, &buf[TPM_HEADER_SIZE],
|
|
expected - TPM_HEADER_SIZE);
|
|
if (size < expected) {
|
|
debug("Unable to read remainder of result\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
rc = tpm_tis_i2c_wait_for_stat(dev, TPM_STS_VALID, chip->timeout_c,
|
|
&status);
|
|
if (rc)
|
|
return rc;
|
|
if (status & TPM_STS_DATA_AVAIL) { /* Retry? */
|
|
debug("Error left over data\n");
|
|
return -EIO;
|
|
}
|
|
|
|
return size;
|
|
}
|
|
|
|
static int tpm_tis_i2c_send(struct udevice *dev, const u8 *buf, size_t len)
|
|
{
|
|
struct tpm_chip *chip = dev_get_priv(dev);
|
|
int rc, status;
|
|
size_t burstcnt;
|
|
size_t count = 0;
|
|
int retry = 0;
|
|
u8 sts = TPM_STS_GO;
|
|
|
|
debug("%s: len=%d\n", __func__, len);
|
|
if (len > TPM_DEV_BUFSIZE)
|
|
return -E2BIG; /* Command is too long for our tpm, sorry */
|
|
|
|
if (tpm_tis_i2c_request_locality(dev, 0) < 0)
|
|
return -EBUSY;
|
|
|
|
status = tpm_tis_i2c_status(dev);
|
|
if ((status & TPM_STS_COMMAND_READY) == 0) {
|
|
rc = tpm_tis_i2c_ready(dev);
|
|
if (rc)
|
|
return rc;
|
|
rc = tpm_tis_i2c_wait_for_stat(dev, TPM_STS_COMMAND_READY,
|
|
chip->timeout_b, &status);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
|
|
burstcnt = tpm_tis_i2c_get_burstcount(dev);
|
|
|
|
/* burstcount < 0 -> tpm is busy */
|
|
if (burstcnt < 0)
|
|
return burstcnt;
|
|
|
|
while (count < len) {
|
|
udelay(300);
|
|
if (burstcnt > len - count)
|
|
burstcnt = len - count;
|
|
|
|
#ifdef CONFIG_TPM_TIS_I2C_BURST_LIMITATION
|
|
if (retry && burstcnt > CONFIG_TPM_TIS_I2C_BURST_LIMITATION_LEN)
|
|
burstcnt = CONFIG_TPM_TIS_I2C_BURST_LIMITATION_LEN;
|
|
#endif /* CONFIG_TPM_TIS_I2C_BURST_LIMITATION */
|
|
|
|
rc = tpm_tis_i2c_write(dev, TPM_DATA_FIFO(chip->locality),
|
|
&(buf[count]), burstcnt);
|
|
if (rc == 0)
|
|
count += burstcnt;
|
|
else {
|
|
debug("%s: error\n", __func__);
|
|
if (retry++ > 10)
|
|
return -EIO;
|
|
rc = tpm_tis_i2c_wait_for_stat(dev, TPM_STS_VALID,
|
|
chip->timeout_c,
|
|
&status);
|
|
if (rc)
|
|
return rc;
|
|
|
|
if ((status & TPM_STS_DATA_EXPECT) == 0)
|
|
return -EIO;
|
|
}
|
|
}
|
|
|
|
/* Go and do it */
|
|
rc = tpm_tis_i2c_write(dev, TPM_STS(chip->locality), &sts, 1);
|
|
if (rc < 0)
|
|
return rc;
|
|
debug("%s: done, rc=%d\n", __func__, rc);
|
|
|
|
return len;
|
|
}
|
|
|
|
static int tpm_tis_i2c_cleanup(struct udevice *dev)
|
|
{
|
|
struct tpm_chip *chip = dev_get_priv(dev);
|
|
|
|
tpm_tis_i2c_ready(dev);
|
|
/*
|
|
* The TPM needs some time to clean up here,
|
|
* so we sleep rather than keeping the bus busy
|
|
*/
|
|
mdelay(2);
|
|
tpm_tis_i2c_release_locality(dev, chip->locality, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tpm_tis_i2c_init(struct udevice *dev)
|
|
{
|
|
struct tpm_chip *chip = dev_get_priv(dev);
|
|
u32 vendor;
|
|
u32 expected_did_vid;
|
|
int rc;
|
|
|
|
chip->is_open = 1;
|
|
|
|
/* Default timeouts - these could move to the device tree */
|
|
chip->timeout_a = TIS_SHORT_TIMEOUT_MS;
|
|
chip->timeout_b = TIS_LONG_TIMEOUT_MS;
|
|
chip->timeout_c = TIS_SHORT_TIMEOUT_MS;
|
|
chip->timeout_d = TIS_SHORT_TIMEOUT_MS;
|
|
|
|
rc = tpm_tis_i2c_request_locality(dev, 0);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* Read four bytes from DID_VID register */
|
|
if (tpm_tis_i2c_read(dev, TPM_DID_VID(0), (uchar *)&vendor, 4) < 0) {
|
|
tpm_tis_i2c_release_locality(dev, 0, 1);
|
|
return -EIO;
|
|
}
|
|
|
|
if (chip->chip_type == SLB9635) {
|
|
vendor = be32_to_cpu(vendor);
|
|
expected_did_vid = TPM_TIS_I2C_DID_VID_9635;
|
|
} else {
|
|
/* device id and byte order has changed for newer i2c tpms */
|
|
expected_did_vid = TPM_TIS_I2C_DID_VID_9645;
|
|
}
|
|
|
|
if (chip->chip_type != UNKNOWN && vendor != expected_did_vid) {
|
|
pr_err("Vendor id did not match! ID was %08x\n", vendor);
|
|
return -ENODEV;
|
|
}
|
|
|
|
chip->vend_dev = vendor;
|
|
debug("1.2 TPM (chip type %s device-id 0x%X)\n",
|
|
chip_name[chip->chip_type], vendor >> 16);
|
|
|
|
/*
|
|
* A timeout query to TPM can be placed here.
|
|
* Standard timeout values are used so far
|
|
*/
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tpm_tis_i2c_open(struct udevice *dev)
|
|
{
|
|
struct tpm_chip *chip = dev_get_priv(dev);
|
|
int rc;
|
|
|
|
debug("%s: start\n", __func__);
|
|
if (chip->is_open)
|
|
return -EBUSY;
|
|
rc = tpm_tis_i2c_init(dev);
|
|
if (rc < 0)
|
|
chip->is_open = 0;
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int tpm_tis_i2c_close(struct udevice *dev)
|
|
{
|
|
struct tpm_chip *chip = dev_get_priv(dev);
|
|
|
|
if (chip->is_open) {
|
|
tpm_tis_i2c_release_locality(dev, chip->locality, 1);
|
|
chip->is_open = 0;
|
|
chip->vend_dev = 0;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tpm_tis_get_desc(struct udevice *dev, char *buf, int size)
|
|
{
|
|
struct tpm_chip *chip = dev_get_priv(dev);
|
|
|
|
if (size < 50)
|
|
return -ENOSPC;
|
|
|
|
return snprintf(buf, size, "1.2 TPM (%s, chip type %s device-id 0x%x)",
|
|
chip->is_open ? "open" : "closed",
|
|
chip_name[chip->chip_type],
|
|
chip->vend_dev >> 16);
|
|
}
|
|
|
|
static int tpm_tis_i2c_probe(struct udevice *dev)
|
|
{
|
|
struct tpm_chip_priv *uc_priv = dev_get_uclass_priv(dev);
|
|
struct tpm_chip *chip = dev_get_priv(dev);
|
|
|
|
chip->chip_type = dev_get_driver_data(dev);
|
|
|
|
/* TODO: These need to be checked and tuned */
|
|
uc_priv->duration_ms[TPM_SHORT] = TIS_SHORT_TIMEOUT_MS;
|
|
uc_priv->duration_ms[TPM_MEDIUM] = TIS_LONG_TIMEOUT_MS;
|
|
uc_priv->duration_ms[TPM_LONG] = TIS_LONG_TIMEOUT_MS;
|
|
uc_priv->retry_time_ms = TPM_TIMEOUT_MS;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct tpm_ops tpm_tis_i2c_ops = {
|
|
.open = tpm_tis_i2c_open,
|
|
.close = tpm_tis_i2c_close,
|
|
.get_desc = tpm_tis_get_desc,
|
|
.send = tpm_tis_i2c_send,
|
|
.recv = tpm_tis_i2c_recv,
|
|
.cleanup = tpm_tis_i2c_cleanup,
|
|
};
|
|
|
|
static const struct udevice_id tpm_tis_i2c_ids[] = {
|
|
{ .compatible = "infineon,slb9635tt", .data = SLB9635 },
|
|
{ .compatible = "infineon,slb9645tt", .data = SLB9645 },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(tpm_tis_i2c) = {
|
|
.name = "tpm_tis_infineon",
|
|
.id = UCLASS_TPM,
|
|
.of_match = tpm_tis_i2c_ids,
|
|
.ops = &tpm_tis_i2c_ops,
|
|
.probe = tpm_tis_i2c_probe,
|
|
.priv_auto_alloc_size = sizeof(struct tpm_chip),
|
|
};
|