mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-06-09 23:36:03 +09:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
141 lines
3.9 KiB
C
141 lines
3.9 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Common configuration settings for IGEP technology based boards
|
|
*
|
|
* (C) Copyright 2012
|
|
* ISEE 2007 SL, <www.iseebcn.com>
|
|
*/
|
|
|
|
#ifndef __IGEP00X0_H
|
|
#define __IGEP00X0_H
|
|
|
|
#define CONFIG_NR_DRAM_BANKS 2
|
|
|
|
#include <configs/ti_omap3_common.h>
|
|
|
|
/*
|
|
* We are only ever GP parts and will utilize all of the "downloaded image"
|
|
* area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
|
|
*/
|
|
#undef CONFIG_SPL_TEXT_BASE
|
|
#define CONFIG_SPL_TEXT_BASE 0x40200000
|
|
|
|
#define CONFIG_MISC_INIT_R
|
|
|
|
#define CONFIG_REVISION_TAG 1
|
|
|
|
/* GPIO banks */
|
|
#define CONFIG_OMAP3_GPIO_2 /* GPIO32..63 is in GPIO bank 2 */
|
|
#define CONFIG_OMAP3_GPIO_4 /* GPIO96..127 is in GPIO bank 4 */
|
|
|
|
/* TPS65950 */
|
|
#define PBIASLITEVMODE1 (1 << 8)
|
|
|
|
/* LED */
|
|
#define IGEP0020_GPIO_LED 27
|
|
#define IGEP0030_GPIO_LED 16
|
|
|
|
/* Board and revision detection GPIOs */
|
|
#define IGEP0030_USB_TRANSCEIVER_RESET 54
|
|
#define GPIO_IGEP00X0_BOARD_DETECTION 28
|
|
#define GPIO_IGEP00X0_REVISION_DETECTION 129
|
|
|
|
/* USB device configuration */
|
|
#define CONFIG_USB_DEVICE 1
|
|
#define CONFIG_USB_TTY 1
|
|
|
|
/* Change these to suit your needs */
|
|
#define CONFIG_USBD_VENDORID 0x0451
|
|
#define CONFIG_USBD_PRODUCTID 0x5678
|
|
#define CONFIG_USBD_MANUFACTURER "Texas Instruments"
|
|
#define CONFIG_USBD_PRODUCT_NAME "IGEP"
|
|
|
|
#ifndef CONFIG_SPL_BUILD
|
|
|
|
/* Environment */
|
|
#define ENV_DEVICE_SETTINGS \
|
|
"stdin=serial\0" \
|
|
"stdout=serial\0" \
|
|
"stderr=serial\0"
|
|
|
|
#define MEM_LAYOUT_SETTINGS \
|
|
DEFAULT_LINUX_BOOT_ENV \
|
|
"scriptaddr=0x87E00000\0" \
|
|
"pxefile_addr_r=0x87F00000\0"
|
|
|
|
#define BOOT_TARGET_DEVICES(func) \
|
|
func(MMC, mmc, 0)
|
|
|
|
#include <config_distro_bootcmd.h>
|
|
|
|
#define ENV_FINDFDT \
|
|
"findfdt="\
|
|
"if test ${board_name} = igep0020; then " \
|
|
"if test ${board_rev} = F; then " \
|
|
"setenv fdtfile omap3-igep0020-rev-f.dtb; " \
|
|
"else " \
|
|
"setenv fdtfile omap3-igep0020.dtb; fi; fi; " \
|
|
"if test ${board_name} = igep0030; then " \
|
|
"if test ${board_rev} = G; then " \
|
|
"setenv fdtfile omap3-igep0030-rev-g.dtb; " \
|
|
"else " \
|
|
"setenv fdtfile omap3-igep0030.dtb; fi; fi; " \
|
|
"if test ${fdtfile} = ''; then " \
|
|
"echo WARNING: Could not determine device tree to use; fi; \0"
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
ENV_FINDFDT \
|
|
ENV_DEVICE_SETTINGS \
|
|
MEM_LAYOUT_SETTINGS \
|
|
BOOTENV
|
|
|
|
#endif
|
|
|
|
#define CONFIG_MTD_PARTITIONS
|
|
#define CONFIG_SYS_MTDPARTS_RUNTIME
|
|
|
|
/* OneNAND config */
|
|
#define CONFIG_USE_ONENAND_BOARD_INIT
|
|
#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
|
|
#define CONFIG_SYS_ONENAND_BLOCK_SIZE (128*1024)
|
|
|
|
/* NAND config */
|
|
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
|
|
#define CONFIG_SYS_NAND_PAGE_COUNT 64
|
|
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
|
|
#define CONFIG_SYS_NAND_OOBSIZE 64
|
|
#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
|
|
#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
|
|
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
|
|
10, 11, 12, 13, 14, 15, 16, 17, \
|
|
18, 19, 20, 21, 22, 23, 24, 25, \
|
|
26, 27, 28, 29, 30, 31, 32, 33, \
|
|
34, 35, 36, 37, 38, 39, 40, 41, \
|
|
42, 43, 44, 45, 46, 47, 48, 49, \
|
|
50, 51, 52, 53, 54, 55, 56, 57, }
|
|
#define CONFIG_SYS_NAND_ECCSIZE 512
|
|
#define CONFIG_SYS_NAND_ECCBYTES 14
|
|
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
|
|
|
|
/* UBI configuration */
|
|
#define CONFIG_SPL_UBI 1
|
|
#define CONFIG_SPL_UBI_MAX_VOL_LEBS 256
|
|
#define CONFIG_SPL_UBI_MAX_PEB_SIZE (256*1024)
|
|
#define CONFIG_SPL_UBI_MAX_PEBS 4096
|
|
#define CONFIG_SPL_UBI_VOL_IDS 8
|
|
#define CONFIG_SPL_UBI_LOAD_MONITOR_ID 0
|
|
#define CONFIG_SPL_UBI_LOAD_KERNEL_ID 3
|
|
#define CONFIG_SPL_UBI_LOAD_ARGS_ID 4
|
|
#define CONFIG_SPL_UBI_PEB_OFFSET 4
|
|
#define CONFIG_SPL_UBI_VID_OFFSET 512
|
|
#define CONFIG_SPL_UBI_LEB_START 2048
|
|
#define CONFIG_SPL_UBI_INFO_ADDR 0x88080000
|
|
|
|
/* environment organization */
|
|
#define CONFIG_ENV_UBI_PART "UBI"
|
|
#define CONFIG_ENV_UBI_VOLUME "config"
|
|
#define CONFIG_ENV_UBI_VOLUME_REDUND "config_r"
|
|
#define CONFIG_ENV_SIZE (32*1024)
|
|
|
|
#endif /* __IGEP00X0_H */
|