u-boot-brain/include/configs/k2g_evm.h
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

102 lines
3.0 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Configuration header file for TI's k2g-evm
*
* (C) Copyright 2015
* Texas Instruments Incorporated, <www.ti.com>
*/
#ifndef __CONFIG_K2G_EVM_H
#define __CONFIG_K2G_EVM_H
#include <environment/ti/mmc.h>
#include <environment/ti/spi.h>
/* Platform type */
#define CONFIG_SOC_K2G
/* U-Boot general configuration */
#define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \
DEFAULT_MMC_TI_ARGS \
DEFAULT_PMMC_BOOT_ENV \
DEFAULT_FW_INITRAMFS_BOOT_ENV \
DEFAULT_FIT_TI_ARGS \
"boot=mmc\0" \
"console=ttyS0,115200n8\0" \
"bootpart=0:2\0" \
"bootdir=/boot\0" \
"rd_spec=-\0" \
"args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \
"root=ubi0:rootfs rootflags=sync rw ubi.mtd=ubifs,2048\0" \
"findfdt="\
"if test $board_name = 66AK2GGP; then " \
"setenv name_fdt keystone-k2g-evm.dtb; " \
"else if test $board_name = 66AK2GG1; then " \
"setenv name_fdt keystone-k2g-evm.dtb; " \
"else if test $board_name = 66AK2GIC; then " \
"setenv name_fdt keystone-k2g-ice.dtb; " \
"else if test $name_fdt = undefined; then " \
"echo WARNING: Could not determine device tree to use;"\
"fi;fi;fi;fi; setenv fdtfile ${name_fdt}\0" \
"name_mon=skern-k2g.bin\0" \
"name_ubi=k2g-evm-ubifs.ubi\0" \
"name_uboot=u-boot-spi-k2g-evm.gph\0" \
"init_mmc=run args_all args_mmc\0" \
"init_fw_rd_mmc=load mmc ${bootpart} ${rdaddr} " \
"${bootdir}/${name_fw_rd}; run set_rd_spec\0" \
"soc_variant=k2g\0" \
"get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt}\0"\
"get_kern_mmc=load mmc ${bootpart} ${loadaddr} " \
"${bootdir}/${name_kern}\0" \
"get_mon_mmc=load mmc ${bootpart} ${addr_mon} ${bootdir}/${name_mon}\0"\
"name_fs=arago-base-tisdk-image-k2g-evm.cpio\0"
#ifndef CONFIG_TI_SECURE_DEVICE
#define CONFIG_BOOTCOMMAND \
"run findfdt; " \
"run envboot; " \
"run init_${boot}; " \
"run get_mon_${boot} run_mon; " \
"run set_name_pmmc get_pmmc_${boot} run_pmmc; " \
"run get_kern_${boot}; " \
"run init_fw_rd_${boot}; " \
"run get_fdt_${boot}; " \
"run run_kern"
#else
#define CONFIG_BOOTCOMMAND \
"run findfdt; " \
"run envboot; " \
"run run_mon_hs; " \
"run init_${boot}; " \
"run get_fit_${boot}; " \
"bootm ${fit_loadaddr}#${name_fdt}"
#endif
/* SPL SPI Loader Configuration */
#define CONFIG_SPL_TEXT_BASE 0x0c0a0000
/* NAND Configuration */
#define CONFIG_SYS_NAND_PAGE_2K
/* Network */
#define CONFIG_KSNET_NETCP_V1_5
#define CONFIG_KSNET_CPSW_NUM_PORTS 2
#define CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE
#define PHY_ANEG_TIMEOUT 10000 /* PHY needs longer aneg time */
#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB */
#define CONFIG_SF_DEFAULT_BUS 1
#define CONFIG_SF_DEFAULT_CS 0
#ifndef CONFIG_SPL_BUILD
#define CONFIG_CADENCE_QSPI
#define CONFIG_CQSPI_REF_CLK 384000000
#endif
#define SPI_MTD_PARTS KEYSTONE_SPI1_MTD_PARTS
#include <configs/ti_armv7_keystone2.h>
#endif /* __CONFIG_K2G_EVM_H */