mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 08:58:52 +09:00
![Vasili Galka](/assets/img/avatar_default.png)
From comparison of current logic and the logic that was prior to commitaba27ac
, we see that first parameter of FPGA_GET_REG() shall be the FPGA index and not channel number. The re-factoring in commitaba27ac
accidentally changed that. Cc: Stefan Roese <sr@denx.de> Acked-by: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Vasili Galka <vvv444@gmail.com>
387 lines
8.4 KiB
C
387 lines
8.4 KiB
C
/*
|
|
* (C) Copyright 2010
|
|
* Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
|
|
*
|
|
* based on kilauea.c
|
|
* by Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/ppc4xx.h>
|
|
#include <asm/ppc405.h>
|
|
#include <libfdt.h>
|
|
#include <fdt_support.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/io.h>
|
|
#include <asm/errno.h>
|
|
#include <asm/ppc4xx-gpio.h>
|
|
#include <flash.h>
|
|
|
|
#include <pca9698.h>
|
|
|
|
#include "405ex.h"
|
|
#include <gdsys_fpga.h>
|
|
|
|
#include <miiphy.h>
|
|
#include <i2c.h>
|
|
#include <dtt.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define PHYREG_CONTROL 0
|
|
#define PHYREG_PAGE_ADDRESS 22
|
|
#define PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1 16
|
|
#define PHYREG_PG2_COPPER_SPECIFIC_CONTROL_2 26
|
|
#define PHYREG_PG2_MAC_SPECIFIC_STATUS_1 17
|
|
#define PHYREG_PG2_MAC_SPECIFIC_CONTROL 21
|
|
|
|
#define LATCH0_BASE (CONFIG_SYS_LATCH_BASE)
|
|
#define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100)
|
|
#define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200)
|
|
#define LATCH3_BASE (CONFIG_SYS_LATCH_BASE + 0x300)
|
|
|
|
enum {
|
|
UNITTYPE_CCD_SWITCH = 1,
|
|
};
|
|
|
|
enum {
|
|
HWVER_100 = 0,
|
|
HWVER_110 = 1,
|
|
};
|
|
|
|
struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR;
|
|
|
|
static inline void blank_string(int size)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < size; i++)
|
|
putc('\b');
|
|
for (i = 0; i < size; i++)
|
|
putc(' ');
|
|
for (i = 0; i < size; i++)
|
|
putc('\b');
|
|
}
|
|
|
|
/*
|
|
* Board early initialization function
|
|
*/
|
|
int misc_init_r(void)
|
|
{
|
|
/* startup fans */
|
|
dtt_init();
|
|
|
|
#ifdef CONFIG_ENV_IS_IN_FLASH
|
|
/* Monitor protection ON by default */
|
|
flash_protect(FLAG_PROTECT_SET,
|
|
-CONFIG_SYS_MONITOR_LEN,
|
|
0xffffffff,
|
|
&flash_info[0]);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void print_fpga_info(unsigned dev)
|
|
{
|
|
u16 versions;
|
|
u16 fpga_version;
|
|
u16 fpga_features;
|
|
int fpga_state = get_fpga_state(dev);
|
|
|
|
unsigned unit_type;
|
|
unsigned hardware_version;
|
|
unsigned feature_channels;
|
|
unsigned feature_expansion;
|
|
|
|
FPGA_GET_REG(dev, versions, &versions);
|
|
FPGA_GET_REG(dev, fpga_version, &fpga_version);
|
|
FPGA_GET_REG(dev, fpga_features, &fpga_features);
|
|
|
|
printf("FPGA%d: ", dev);
|
|
if (fpga_state & FPGA_STATE_PLATFORM)
|
|
printf("(legacy) ");
|
|
|
|
if (fpga_state & FPGA_STATE_DONE_FAILED) {
|
|
printf(" done timed out\n");
|
|
return;
|
|
}
|
|
|
|
if (fpga_state & FPGA_STATE_REFLECTION_FAILED) {
|
|
printf(" refelectione test failed\n");
|
|
return;
|
|
}
|
|
|
|
unit_type = (versions & 0xf000) >> 12;
|
|
hardware_version = versions & 0x000f;
|
|
feature_channels = fpga_features & 0x007f;
|
|
feature_expansion = fpga_features & (1<<15);
|
|
|
|
switch (unit_type) {
|
|
case UNITTYPE_CCD_SWITCH:
|
|
printf("CCD-Switch");
|
|
break;
|
|
|
|
default:
|
|
printf("UnitType %d(not supported)", unit_type);
|
|
break;
|
|
}
|
|
|
|
switch (hardware_version) {
|
|
case HWVER_100:
|
|
printf(" HW-Ver 1.00\n");
|
|
break;
|
|
|
|
case HWVER_110:
|
|
printf(" HW-Ver 1.10\n");
|
|
break;
|
|
|
|
default:
|
|
printf(" HW-Ver %d(not supported)\n",
|
|
hardware_version);
|
|
break;
|
|
}
|
|
|
|
printf(" FPGA V %d.%02d, features:",
|
|
fpga_version / 100, fpga_version % 100);
|
|
|
|
printf(" %d channel(s)", feature_channels);
|
|
|
|
printf(", expansion %ssupported\n", feature_expansion ? "" : "un");
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
char *s = getenv("serial#");
|
|
|
|
printf("Board: CATCenter Io64\n");
|
|
|
|
if (s != NULL) {
|
|
puts(", serial# ");
|
|
puts(s);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int configure_gbit_phy(char *bus, unsigned char addr)
|
|
{
|
|
unsigned short value;
|
|
|
|
/* select page 0 */
|
|
if (miiphy_write(bus, addr, PHYREG_PAGE_ADDRESS, 0x0000))
|
|
goto err_out;
|
|
/* switch to powerdown */
|
|
if (miiphy_read(bus, addr, PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1,
|
|
&value))
|
|
goto err_out;
|
|
if (miiphy_write(bus, addr, PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1,
|
|
value | 0x0004))
|
|
goto err_out;
|
|
/* select page 2 */
|
|
if (miiphy_write(bus, addr, PHYREG_PAGE_ADDRESS, 0x0002))
|
|
goto err_out;
|
|
/* disable SGMII autonegotiation */
|
|
if (miiphy_write(bus, addr, PHYREG_PG2_MAC_SPECIFIC_CONTROL, 48))
|
|
goto err_out;
|
|
/* select page 0 */
|
|
if (miiphy_write(bus, addr, PHYREG_PAGE_ADDRESS, 0x0000))
|
|
goto err_out;
|
|
/* switch from powerdown to normal operation */
|
|
if (miiphy_read(bus, addr, PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1,
|
|
&value))
|
|
goto err_out;
|
|
if (miiphy_write(bus, addr, PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1,
|
|
value & ~0x0004))
|
|
goto err_out;
|
|
/* reset phy so settings take effect */
|
|
if (miiphy_write(bus, addr, PHYREG_CONTROL, 0x9140))
|
|
goto err_out;
|
|
|
|
return 0;
|
|
|
|
err_out:
|
|
printf("Error writing to the PHY addr=%02x\n", addr);
|
|
return -1;
|
|
}
|
|
|
|
int verify_gbit_phy(char *bus, unsigned char addr)
|
|
{
|
|
unsigned short value;
|
|
|
|
/* select page 2 */
|
|
if (miiphy_write(bus, addr, PHYREG_PAGE_ADDRESS, 0x0002))
|
|
goto err_out;
|
|
/* verify SGMII link status */
|
|
if (miiphy_read(bus, addr, PHYREG_PG2_MAC_SPECIFIC_STATUS_1, &value))
|
|
goto err_out;
|
|
if (!(value & (1 << 10)))
|
|
return -2;
|
|
|
|
return 0;
|
|
|
|
err_out:
|
|
printf("Error writing to the PHY addr=%02x\n", addr);
|
|
return -1;
|
|
}
|
|
|
|
int last_stage_init(void)
|
|
{
|
|
unsigned int k;
|
|
unsigned int fpga;
|
|
int failed = 0;
|
|
char str_phys[] = "Setup PHYs -";
|
|
char str_serdes[] = "Start SERDES blocks";
|
|
char str_channels[] = "Start FPGA channels";
|
|
char str_locks[] = "Verify SERDES locks";
|
|
char str_hicb[] = "Verify HICB status";
|
|
char str_status[] = "Verify PHY status -";
|
|
char slash[] = "\\|/-\\|/-";
|
|
|
|
print_fpga_info(0);
|
|
print_fpga_info(1);
|
|
|
|
/* setup Gbit PHYs */
|
|
puts("TRANS: ");
|
|
puts(str_phys);
|
|
miiphy_register(CONFIG_SYS_GBIT_MII_BUSNAME,
|
|
bb_miiphy_read, bb_miiphy_write);
|
|
|
|
for (k = 0; k < 32; ++k) {
|
|
configure_gbit_phy(CONFIG_SYS_GBIT_MII_BUSNAME, k);
|
|
putc('\b');
|
|
putc(slash[k % 8]);
|
|
}
|
|
|
|
miiphy_register(CONFIG_SYS_GBIT_MII1_BUSNAME,
|
|
bb_miiphy_read, bb_miiphy_write);
|
|
|
|
for (k = 0; k < 32; ++k) {
|
|
configure_gbit_phy(CONFIG_SYS_GBIT_MII1_BUSNAME, k);
|
|
putc('\b');
|
|
putc(slash[k % 8]);
|
|
}
|
|
blank_string(strlen(str_phys));
|
|
|
|
/* take fpga serdes blocks out of reset */
|
|
puts(str_serdes);
|
|
udelay(500000);
|
|
FPGA_SET_REG(0, quad_serdes_reset, 0);
|
|
FPGA_SET_REG(1, quad_serdes_reset, 0);
|
|
blank_string(strlen(str_serdes));
|
|
|
|
/* take channels out of reset */
|
|
puts(str_channels);
|
|
udelay(500000);
|
|
for (fpga = 0; fpga < 2; ++fpga) {
|
|
for (k = 0; k < 32; ++k)
|
|
FPGA_SET_REG(fpga, ch[k].config_int, 0);
|
|
}
|
|
blank_string(strlen(str_channels));
|
|
|
|
/* verify channels serdes lock */
|
|
puts(str_locks);
|
|
udelay(500000);
|
|
for (fpga = 0; fpga < 2; ++fpga) {
|
|
for (k = 0; k < 32; ++k) {
|
|
u16 status;
|
|
FPGA_GET_REG(fpga, ch[k].status_int, &status);
|
|
if (!(status & (1 << 4))) {
|
|
failed = 1;
|
|
printf("fpga %d channel %d: no serdes lock\n",
|
|
fpga, k);
|
|
}
|
|
/* reset events */
|
|
FPGA_SET_REG(fpga, ch[k].status_int, 0);
|
|
}
|
|
}
|
|
blank_string(strlen(str_locks));
|
|
|
|
/* verify hicb_status */
|
|
puts(str_hicb);
|
|
for (fpga = 0; fpga < 2; ++fpga) {
|
|
for (k = 0; k < 32; ++k) {
|
|
u16 status;
|
|
FPGA_GET_REG(fpga, hicb_ch[k].status_int, &status);
|
|
if (status)
|
|
printf("fpga %d hicb %d: hicb status %04x\n",
|
|
fpga, k, status);
|
|
/* reset events */
|
|
FPGA_SET_REG(fpga, hicb_ch[k].status_int, 0);
|
|
}
|
|
}
|
|
blank_string(strlen(str_hicb));
|
|
|
|
/* verify phy status */
|
|
puts(str_status);
|
|
for (k = 0; k < 32; ++k) {
|
|
if (verify_gbit_phy(CONFIG_SYS_GBIT_MII_BUSNAME, k)) {
|
|
printf("verify baseboard phy %d failed\n", k);
|
|
failed = 1;
|
|
}
|
|
putc('\b');
|
|
putc(slash[k % 8]);
|
|
}
|
|
for (k = 0; k < 32; ++k) {
|
|
if (verify_gbit_phy(CONFIG_SYS_GBIT_MII1_BUSNAME, k)) {
|
|
printf("verify extensionboard phy %d failed\n", k);
|
|
failed = 1;
|
|
}
|
|
putc('\b');
|
|
putc(slash[k % 8]);
|
|
}
|
|
blank_string(strlen(str_status));
|
|
|
|
printf("Starting 64 channels %s\n", failed ? "failed" : "ok");
|
|
|
|
return 0;
|
|
}
|
|
|
|
void gd405ex_init(void)
|
|
{
|
|
unsigned int k;
|
|
|
|
if (i2c_probe(0x22)) { /* i2c_probe returns 0 on success */
|
|
for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k)
|
|
gd->arch.fpga_state[k] |= FPGA_STATE_PLATFORM;
|
|
} else {
|
|
pca9698_direction_output(0x22, 39, 1);
|
|
}
|
|
}
|
|
|
|
void gd405ex_set_fpga_reset(unsigned state)
|
|
{
|
|
int legacy = get_fpga_state(0) & FPGA_STATE_PLATFORM;
|
|
|
|
if (legacy) {
|
|
if (state) {
|
|
out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET);
|
|
out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET);
|
|
} else {
|
|
out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT);
|
|
out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT);
|
|
}
|
|
} else {
|
|
pca9698_set_value(0x22, 39, state ? 0 : 1);
|
|
}
|
|
}
|
|
|
|
void gd405ex_setup_hw(void)
|
|
{
|
|
gpio_write_bit(CONFIG_SYS_GPIO_STARTUP_FINISHED_N, 0);
|
|
gpio_write_bit(CONFIG_SYS_GPIO_STARTUP_FINISHED, 1);
|
|
}
|
|
|
|
int gd405ex_get_fpga_done(unsigned fpga)
|
|
{
|
|
int legacy = get_fpga_state(0) & FPGA_STATE_PLATFORM;
|
|
|
|
if (legacy)
|
|
return in_le16((void *)LATCH3_BASE)
|
|
& CONFIG_SYS_FPGA_DONE(fpga);
|
|
else
|
|
return pca9698_get_value(0x22, fpga ? 9 : 8);
|
|
}
|