mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-22 18:09:03 +09:00
290 lines
9.7 KiB
C
290 lines
9.7 KiB
C
/*
|
|
* Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/processor.h>
|
|
#include <spd_sdram.h>
|
|
|
|
#define BOOT_SMALL_FLASH 32 /* 00100000 */
|
|
#define FLASH_ONBD_N 2 /* 00000010 */
|
|
#define FLASH_SRAM_SEL 1 /* 00000001 */
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
long int fixed_sdram(void);
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
uint reg;
|
|
unsigned char *fpga_base = (unsigned char *)CFG_FPGA_BASE;
|
|
unsigned char status;
|
|
|
|
/*--------------------------------------------------------------------
|
|
* Setup the external bus controller/chip selects
|
|
*-------------------------------------------------------------------*/
|
|
mtdcr(ebccfga, xbcfg);
|
|
reg = mfdcr(ebccfgd);
|
|
mtdcr(ebccfgd, reg | 0x04000000); /* Set ATC */
|
|
|
|
mtebc(pb1ap, 0x02815480); /* NVRAM/RTC */
|
|
mtebc(pb1cr, 0x48018000); /* BA=0x480 1MB R/W 8-bit */
|
|
mtebc(pb7ap, 0x01015280); /* FPGA registers */
|
|
mtebc(pb7cr, 0x48318000); /* BA=0x483 1MB R/W 8-bit */
|
|
|
|
/* read FPGA_REG0 and set the bus controller */
|
|
status = *fpga_base;
|
|
if ((status & BOOT_SMALL_FLASH) && !(status & FLASH_ONBD_N)) {
|
|
mtebc(pb0ap, 0x9b015480); /* FLASH/SRAM */
|
|
mtebc(pb0cr, 0xfff18000); /* BAS=0xfff 1MB R/W 8-bit */
|
|
mtebc(pb2ap, 0x9b015480); /* 4MB FLASH */
|
|
mtebc(pb2cr, 0xff858000); /* BAS=0xff8 4MB R/W 8-bit */
|
|
} else {
|
|
mtebc(pb0ap, 0x9b015480); /* 4MB FLASH */
|
|
mtebc(pb0cr, 0xffc58000); /* BAS=0xffc 4MB R/W 8-bit */
|
|
|
|
/* set CS2 if FLASH_ONBD_N == 0 */
|
|
if (!(status & FLASH_ONBD_N)) {
|
|
mtebc(pb2ap, 0x9b015480); /* FLASH/SRAM */
|
|
mtebc(pb2cr, 0xff818000); /* BAS=0xff8 4MB R/W 8-bit */
|
|
}
|
|
}
|
|
|
|
/*--------------------------------------------------------------------
|
|
* Setup the interrupt controller polarities, triggers, etc.
|
|
*-------------------------------------------------------------------*/
|
|
mtdcr(uic0sr, 0xffffffff); /* clear all */
|
|
mtdcr(uic0er, 0x00000000); /* disable all */
|
|
mtdcr(uic0cr, 0x00000009); /* SMI & UIC1 crit are critical */
|
|
mtdcr(uic0pr, 0xfffffe13); /* per ref-board manual */
|
|
mtdcr(uic0tr, 0x01c00008); /* per ref-board manual */
|
|
mtdcr(uic0vr, 0x00000001); /* int31 highest, base=0x000 */
|
|
mtdcr(uic0sr, 0xffffffff); /* clear all */
|
|
|
|
mtdcr(uic1sr, 0xffffffff); /* clear all */
|
|
mtdcr(uic1er, 0x00000000); /* disable all */
|
|
mtdcr(uic1cr, 0x00000000); /* all non-critical */
|
|
mtdcr(uic1pr, 0xffffe0ff); /* per ref-board manual */
|
|
mtdcr(uic1tr, 0x00ffc000); /* per ref-board manual */
|
|
mtdcr(uic1vr, 0x00000001); /* int31 highest, base=0x000 */
|
|
mtdcr(uic1sr, 0xffffffff); /* clear all */
|
|
|
|
return 0;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
char *s = getenv("serial#");
|
|
|
|
printf("Board: Ebony - AMCC PPC440GP Evaluation Board");
|
|
if (s != NULL) {
|
|
puts(", serial# ");
|
|
puts(s);
|
|
}
|
|
putc('\n');
|
|
|
|
return (0);
|
|
}
|
|
|
|
long int initdram(int board_type)
|
|
{
|
|
long dram_size = 0;
|
|
|
|
#if defined(CONFIG_SPD_EEPROM)
|
|
dram_size = spd_sdram();
|
|
#else
|
|
dram_size = fixed_sdram();
|
|
#endif
|
|
return dram_size;
|
|
}
|
|
|
|
#if defined(CFG_DRAM_TEST)
|
|
int testdram(void)
|
|
{
|
|
uint *pstart = (uint *) 0x00000000;
|
|
uint *pend = (uint *) 0x08000000;
|
|
uint *p;
|
|
|
|
for (p = pstart; p < pend; p++)
|
|
*p = 0xaaaaaaaa;
|
|
|
|
for (p = pstart; p < pend; p++) {
|
|
if (*p != 0xaaaaaaaa) {
|
|
printf("SDRAM test fails at: %08x\n", (uint) p);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
for (p = pstart; p < pend; p++)
|
|
*p = 0x55555555;
|
|
|
|
for (p = pstart; p < pend; p++) {
|
|
if (*p != 0x55555555) {
|
|
printf("SDRAM test fails at: %08x\n", (uint) p);
|
|
return 1;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#if !defined(CONFIG_SPD_EEPROM)
|
|
/*************************************************************************
|
|
* fixed sdram init -- doesn't use serial presence detect.
|
|
*
|
|
* Assumes: 128 MB, non-ECC, non-registered
|
|
* PLB @ 133 MHz
|
|
*
|
|
************************************************************************/
|
|
long int fixed_sdram(void)
|
|
{
|
|
uint reg;
|
|
|
|
/*--------------------------------------------------------------------
|
|
* Setup some default
|
|
*------------------------------------------------------------------*/
|
|
mtsdram(mem_uabba, 0x00000000); /* ubba=0 (default) */
|
|
mtsdram(mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
|
|
mtsdram(mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */
|
|
mtsdram(mem_wddctr, 0x00000000); /* wrcp=0 dcd=0 */
|
|
mtsdram(mem_clktr, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */
|
|
|
|
/*--------------------------------------------------------------------
|
|
* Setup for board-specific specific mem
|
|
*------------------------------------------------------------------*/
|
|
/*
|
|
* Following for CAS Latency = 2.5 @ 133 MHz PLB
|
|
*/
|
|
mtsdram(mem_b0cr, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */
|
|
mtsdram(mem_tr0, 0x410a4012); /* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */
|
|
/* RA=10 RD=3 */
|
|
mtsdram(mem_tr1, 0x8080082f); /* SS=T2 SL=STAGE 3 CD=1 CT=0x02f */
|
|
mtsdram(mem_rtr, 0x08200000); /* Rate 15.625 ns @ 133 MHz PLB */
|
|
mtsdram(mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM */
|
|
udelay(400); /* Delay 200 usecs (min) */
|
|
|
|
/*--------------------------------------------------------------------
|
|
* Enable the controller, then wait for DCEN to complete
|
|
*------------------------------------------------------------------*/
|
|
mtsdram(mem_cfg0, 0x86000000); /* DCEN=1, PMUD=1, 64-bit */
|
|
for (;;) {
|
|
mfsdram(mem_mcsts, reg);
|
|
if (reg & 0x80000000)
|
|
break;
|
|
}
|
|
|
|
return (128 * 1024 * 1024); /* 128 MB */
|
|
}
|
|
#endif /* !defined(CONFIG_SPD_EEPROM) */
|
|
|
|
/*************************************************************************
|
|
* pci_pre_init
|
|
*
|
|
* This routine is called just prior to registering the hose and gives
|
|
* the board the opportunity to check things. Returning a value of zero
|
|
* indicates that things are bad & PCI initialization should be aborted.
|
|
*
|
|
* Different boards may wish to customize the pci controller structure
|
|
* (add regions, override default access routines, etc) or perform
|
|
* certain pre-initialization actions.
|
|
*
|
|
************************************************************************/
|
|
#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
|
|
int pci_pre_init(struct pci_controller *hose)
|
|
{
|
|
unsigned long strap;
|
|
|
|
/*--------------------------------------------------------------------------+
|
|
* The ebony board is always configured as the host & requires the
|
|
* PCI arbiter to be enabled.
|
|
*--------------------------------------------------------------------------*/
|
|
strap = mfdcr(cpc0_strp1);
|
|
if ((strap & 0x00100000) == 0) {
|
|
printf("PCI: CPC0_STRP1[PAE] not set.\n");
|
|
return 0;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
|
|
|
|
/*************************************************************************
|
|
* pci_target_init
|
|
*
|
|
* The bootstrap configuration provides default settings for the pci
|
|
* inbound map (PIM). But the bootstrap config choices are limited and
|
|
* may not be sufficient for a given board.
|
|
*
|
|
************************************************************************/
|
|
#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
|
|
void pci_target_init(struct pci_controller *hose)
|
|
{
|
|
/*--------------------------------------------------------------------------+
|
|
* Disable everything
|
|
*--------------------------------------------------------------------------*/
|
|
out32r(PCIX0_PIM0SA, 0); /* disable */
|
|
out32r(PCIX0_PIM1SA, 0); /* disable */
|
|
out32r(PCIX0_PIM2SA, 0); /* disable */
|
|
out32r(PCIX0_EROMBA, 0); /* disable expansion rom */
|
|
|
|
/*--------------------------------------------------------------------------+
|
|
* Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
|
|
* options to not support sizes such as 128/256 MB.
|
|
*--------------------------------------------------------------------------*/
|
|
out32r(PCIX0_PIM0LAL, CFG_SDRAM_BASE);
|
|
out32r(PCIX0_PIM0LAH, 0);
|
|
out32r(PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1);
|
|
|
|
out32r(PCIX0_BAR0, 0);
|
|
|
|
/*--------------------------------------------------------------------------+
|
|
* Program the board's subsystem id/vendor id
|
|
*--------------------------------------------------------------------------*/
|
|
out16r(PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID);
|
|
out16r(PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID);
|
|
|
|
out16r(PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY);
|
|
}
|
|
#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
|
|
|
|
/*************************************************************************
|
|
* is_pci_host
|
|
*
|
|
* This routine is called to determine if a pci scan should be
|
|
* performed. With various hardware environments (especially cPCI and
|
|
* PPMC) it's insufficient to depend on the state of the arbiter enable
|
|
* bit in the strap register, or generic host/adapter assumptions.
|
|
*
|
|
* Rather than hard-code a bad assumption in the general 440 code, the
|
|
* 440 pci code requires the board to decide at runtime.
|
|
*
|
|
* Return 0 for adapter mode, non-zero for host (monarch) mode.
|
|
*
|
|
*
|
|
************************************************************************/
|
|
#if defined(CONFIG_PCI)
|
|
int is_pci_host(struct pci_controller *hose)
|
|
{
|
|
/* The ebony board is always configured as host. */
|
|
return (1);
|
|
}
|
|
#endif /* defined(CONFIG_PCI) */
|