mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-16 23:18:51 +09:00
![Stefan Roese](/assets/img/avatar_default.png)
This patch adds the documentation for the memory-down parameters of the Intel FSP. To configure a board without SPD DDR DIMM but with onboard DDR chips. The values are taken from the coreboot header: src/soc/intel/fsp_baytrail/chip.h (git ID da1a70ea from 2016-01-16 as reference). Signed-off-by: Stefan Roese <sr@denx.de> Cc: Andrew Bradford <andrew.bradford@kodakalaris.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
188 lines
3.9 KiB
Plaintext
188 lines
3.9 KiB
Plaintext
Intel Bay Trail FSP UPD Binding
|
|
===============================
|
|
|
|
The device tree node which describes the overriding of the Intel Bay Trail FSP
|
|
UPD data for configuring the SoC.
|
|
|
|
All properties can be found within the `upd-region` struct in
|
|
arch/x86/include/asm/arch-baytrail/fsp/fsp_vpd.h, under the same names, and in
|
|
Intel's FSP Binary Configuration Tool for Bay Trail. This list of properties is
|
|
matched up to Intel's E3800 FSPv4 release.
|
|
|
|
# Boolean properties:
|
|
|
|
- fsp,enable-sdio
|
|
- fsp,enable-sdcard
|
|
- fsp,enable-hsuart0
|
|
- fsp,enable-hsuart1
|
|
- fsp,enable-spi
|
|
- fsp,enable-sata
|
|
- fsp,enable-azalia
|
|
- fsp,enable-xhci
|
|
- fsp,enable-lpe
|
|
- fsp,lpss-sio-enable-pci-mode
|
|
- fsp,enable-dma0
|
|
- fsp,enable-dma1
|
|
- fsp,enable-i2-c0
|
|
- fsp,enable-i2-c1
|
|
- fsp,enable-i2-c2
|
|
- fsp,enable-i2-c3
|
|
- fsp,enable-i2-c4
|
|
- fsp,enable-i2-c5
|
|
- fsp,enable-i2-c6
|
|
- fsp,enable-pwm0
|
|
- fsp,enable-pwm1
|
|
- fsp,enable-hsi
|
|
- fsp,mrc-debug-msg
|
|
- fsp,isp-enable
|
|
- fsp,scc-enable-pci-mode
|
|
- fsp,igd-render-standby
|
|
- fsp,txe-uma-enable
|
|
- fsp,emmc45-ddr50-enabled
|
|
- fsp,emmc45-hs200-enabled
|
|
- fsp,enable-igd
|
|
- fsp,enable-memory-down
|
|
|
|
If you set "fsp,enable-memory-down" you are strongly encouraged to provide an
|
|
"fsp,memory-down-params{};" to specify how your memory is configured. If you do
|
|
not set "fsp,enable-memory-down", then the DIMM SPD information will be
|
|
discovered by the FSP and used to setup main memory.
|
|
|
|
|
|
# Integer properties:
|
|
|
|
- fsp,mrc-init-tseg-size
|
|
- fsp,mrc-init-mmio-size
|
|
- fsp,mrc-init-spd-addr1
|
|
- fsp,mrc-init-spd-addr2
|
|
- fsp,emmc-boot-mode
|
|
- fsp,sata-mode
|
|
- fsp,igd-dvmt50-pre-alloc
|
|
- fsp,aperture-size
|
|
- fsp,gtt-size
|
|
- fsp,serial-debug-port-address
|
|
- fsp,serial-debug-port-type
|
|
- fsp,os-selection
|
|
- fsp,emmc45-retune-timer-value
|
|
|
|
- fsp,memory-down-params {
|
|
|
|
# Boolean properties:
|
|
|
|
- fsp,dimm-0-enable
|
|
- fsp,dimm-1-enable
|
|
|
|
# Integer properties:
|
|
|
|
- fsp,dram-speed:
|
|
0x0: "800 MHz"
|
|
0x1: "1066 MHz"
|
|
0x2: "1333 MHz"
|
|
0x3: "1600 MHz"
|
|
|
|
- fsp,dram-type
|
|
0x0: "DDR3"
|
|
0x1: "DDR3L"
|
|
0x2: "DDR3U"
|
|
0x4: "LPDDR2"
|
|
0x5: "LPDDR3"
|
|
0x6: "DDR4"
|
|
|
|
- fsp,dimm-width
|
|
0x0: "x8"
|
|
0x1: "x16"
|
|
0x2: "x32"
|
|
|
|
- fsp,dimm-density
|
|
0x0: "1 Gbit"
|
|
0x1: "2 Gbit"
|
|
0x2: "4 Gbit"
|
|
0x3: "8 Gbit"
|
|
|
|
- fsp,dimm-bus-width
|
|
0x0: "8 bits"
|
|
0x1: "16 bits"
|
|
0x2: "32 bits"
|
|
0x3: "64 bits"
|
|
|
|
- fsp,dimm-sides
|
|
0x0: "1 rank"
|
|
0x1: "2 ranks"
|
|
|
|
- fsp,dimm-tcl
|
|
- fsp,dimm-trpt-rcd
|
|
- fsp,dimm-twr
|
|
- fsp,dimm-twtr
|
|
- fsp,dimm-trrd
|
|
- fsp,dimm-trtp
|
|
- fsp,dimm-tfaw
|
|
};
|
|
|
|
|
|
Example (from MinnowMax Dual Core):
|
|
-----------------------------------
|
|
|
|
/ {
|
|
...
|
|
|
|
fsp {
|
|
compatible = "intel,baytrail-fsp";
|
|
fsp,mrc-init-tseg-size = <0>;
|
|
fsp,mrc-init-mmio-size = <0x800>;
|
|
fsp,mrc-init-spd-addr1 = <0xa0>;
|
|
fsp,mrc-init-spd-addr2 = <0xa2>;
|
|
fsp,emmc-boot-mode = <2>;
|
|
fsp,enable-sdio;
|
|
fsp,enable-sdcard;
|
|
fsp,enable-hsuart1;
|
|
fsp,enable-spi;
|
|
fsp,enable-sata;
|
|
fsp,sata-mode = <1>;
|
|
fsp,enable-xhci;
|
|
fsp,enable-lpe;
|
|
fsp,lpss-sio-enable-pci-mode;
|
|
fsp,enable-dma0;
|
|
fsp,enable-dma1;
|
|
fsp,enable-i2c0;
|
|
fsp,enable-i2c1;
|
|
fsp,enable-i2c2;
|
|
fsp,enable-i2c3;
|
|
fsp,enable-i2c4;
|
|
fsp,enable-i2c5;
|
|
fsp,enable-i2c6;
|
|
fsp,enable-pwm0;
|
|
fsp,enable-pwm1;
|
|
fsp,igd-dvmt50-pre-alloc = <2>;
|
|
fsp,aperture-size = <2>;
|
|
fsp,gtt-size = <2>;
|
|
fsp,serial-debug-port-address = <0x3f8>;
|
|
fsp,serial-debug-port-type = <1>;
|
|
fsp,mrc-debug-msg;
|
|
fsp,scc-enable-pci-mode;
|
|
fsp,os-selection = <4>;
|
|
fsp,emmc45-ddr50-enabled;
|
|
fsp,emmc45-retune-timer-value = <8>;
|
|
fsp,enable-igd;
|
|
fsp,enable-memory-down;
|
|
fsp,memory-down-params {
|
|
compatible = "intel,baytrail-fsp-mdp";
|
|
fsp,dram-speed = <1>;
|
|
fsp,dram-type = <1>;
|
|
fsp,dimm-0-enable;
|
|
fsp,dimm-width = <1>;
|
|
fsp,dimm-density = <2>;
|
|
fsp,dimm-bus-width = <3>;
|
|
fsp,dimm-sides = <0>;
|
|
fsp,dimm-tcl = <0xb>;
|
|
fsp,dimm-trpt-rcd = <0xb>;
|
|
fsp,dimm-twr = <0xc>;
|
|
fsp,dimm-twtr = <6>;
|
|
fsp,dimm-trrd = <6>;
|
|
fsp,dimm-trtp = <6>;
|
|
fsp,dimm-tfaw = <0x14>;
|
|
};
|
|
};
|
|
|
|
...
|
|
};
|