mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-18 16:08:53 +09:00
![Shaohui Xie](/assets/img/avatar_default.png)
XFI does not work stable on current board, it's due to heat sink issue, to make it work stable the board needs additional heat sink, enable two XFI lanes only. Right now we do not have such an erratum for the issue, so use a define CONFIG_SYS_FSL_B4860QDS_XFI_ERR to identify it. The workaround will only be used in XFI protocols and only if the hwconfig indicates that XFI is prefered. A new VSC3308 config function is used instead of re-use the original function, to avoid making the function complex and ugly. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
277 lines
7.5 KiB
C
277 lines
7.5 KiB
C
/*
|
|
* Copyright 2012 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include "vsc3316_3308.h"
|
|
|
|
#define REVISION_ID_REG 0x7E
|
|
#define INTERFACE_MODE_REG 0x79
|
|
#define CURRENT_PAGE_REGISTER 0x7F
|
|
#define CONNECTION_CONFIG_PAGE 0x00
|
|
#define INPUT_STATE_REG 0x13
|
|
#define GLOBAL_INPUT_ISE1 0x51
|
|
#define GLOBAL_INPUT_ISE2 0x52
|
|
#define GLOBAL_INPUT_GAIN 0x53
|
|
#define GLOBAL_INPUT_LOS 0x55
|
|
#define GLOBAL_OUTPUT_PE1 0x56
|
|
#define GLOBAL_OUTPUT_PE2 0x57
|
|
#define GLOBAL_OUTPUT_LEVEL 0x58
|
|
#define GLOBAL_OUTPUT_TERMINATION 0x5A
|
|
#define GLOBAL_CORE_CNTRL 0x5D
|
|
#define OUTPUT_MODE_PAGE 0x23
|
|
#define CORE_CONTROL_PAGE 0x25
|
|
#define CORE_CONFIG_REG 0x75
|
|
|
|
int vsc_if_enable(unsigned int vsc_addr)
|
|
{
|
|
u8 data;
|
|
|
|
debug("VSC:Configuring VSC at I2C address 0x%2x"
|
|
" for 2-wire interface\n", vsc_addr);
|
|
|
|
/* enable 2-wire Serial InterFace (I2C) */
|
|
data = 0x02;
|
|
return i2c_write(vsc_addr, INTERFACE_MODE_REG, 1, &data, 1);
|
|
}
|
|
|
|
int vsc3316_config(unsigned int vsc_addr, int8_t con_arr[][2],
|
|
unsigned int num_con)
|
|
{
|
|
unsigned int i;
|
|
u8 rev_id = 0;
|
|
int ret;
|
|
|
|
debug("VSC:Initializing VSC3316 at I2C address 0x%2x"
|
|
" for Tx\n", vsc_addr);
|
|
|
|
ret = i2c_read(vsc_addr, REVISION_ID_REG, 1, &rev_id, 1);
|
|
if (ret < 0) {
|
|
printf("VSC:0x%x could not read REV_ID from device.\n",
|
|
vsc_addr);
|
|
return ret;
|
|
}
|
|
|
|
if (rev_id != 0xab) {
|
|
printf("VSC: device at address 0x%x is not VSC3316/3308.\n",
|
|
vsc_addr);
|
|
return -ENODEV;
|
|
}
|
|
|
|
ret = vsc_if_enable(vsc_addr);
|
|
if (ret) {
|
|
printf("VSC:0x%x could not configured for 2-wire I/F.\n",
|
|
vsc_addr);
|
|
return ret;
|
|
}
|
|
|
|
/* config connections - page 0x00 */
|
|
i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, CONNECTION_CONFIG_PAGE);
|
|
|
|
/* Making crosspoint connections, by connecting required
|
|
* input to output */
|
|
for (i = 0; i < num_con ; i++)
|
|
i2c_reg_write(vsc_addr, con_arr[i][1], con_arr[i][0]);
|
|
|
|
/* input state - page 0x13 */
|
|
i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, INPUT_STATE_REG);
|
|
/* Configuring the required input of the switch */
|
|
for (i = 0; i < num_con ; i++)
|
|
i2c_reg_write(vsc_addr, con_arr[i][0], 0x80);
|
|
|
|
/* Setting Global Input LOS threshold value */
|
|
i2c_reg_write(vsc_addr, GLOBAL_INPUT_LOS, 0x60);
|
|
|
|
/* config output mode - page 0x23 */
|
|
i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, OUTPUT_MODE_PAGE);
|
|
/* Turn ON the Output driver correspond to required output*/
|
|
for (i = 0; i < num_con ; i++)
|
|
i2c_reg_write(vsc_addr, con_arr[i][1], 0);
|
|
|
|
/* configure global core control register, Turn on Global core power */
|
|
i2c_reg_write(vsc_addr, GLOBAL_CORE_CNTRL, 0);
|
|
|
|
vsc_wp_config(vsc_addr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_SYS_FSL_B4860QDS_XFI_ERR
|
|
int vsc3308_config_adjust(unsigned int vsc_addr, const int8_t con_arr[][2],
|
|
unsigned int num_con)
|
|
{
|
|
unsigned int i;
|
|
u8 rev_id = 0;
|
|
int ret;
|
|
|
|
debug("VSC:Initializing VSC3308 at I2C address 0x%x for Tx\n",
|
|
vsc_addr);
|
|
|
|
ret = i2c_read(vsc_addr, REVISION_ID_REG, 1, &rev_id, 1);
|
|
if (ret < 0) {
|
|
printf("VSC:0x%x could not read REV_ID from device.\n",
|
|
vsc_addr);
|
|
return ret;
|
|
}
|
|
|
|
if (rev_id != 0xab) {
|
|
printf("VSC: device at address 0x%x is not VSC3316/3308.\n",
|
|
vsc_addr);
|
|
return -ENODEV;
|
|
}
|
|
|
|
ret = vsc_if_enable(vsc_addr);
|
|
if (ret) {
|
|
printf("VSC:0x%x could not configured for 2-wire I/F.\n",
|
|
vsc_addr);
|
|
return ret;
|
|
}
|
|
|
|
/* config connections - page 0x00 */
|
|
i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, CONNECTION_CONFIG_PAGE);
|
|
|
|
/* Configure Global Input ISE */
|
|
i2c_reg_write(vsc_addr, GLOBAL_INPUT_ISE1, 0);
|
|
i2c_reg_write(vsc_addr, GLOBAL_INPUT_ISE2, 0);
|
|
|
|
/* Configure Tx/Rx Global Output PE1 */
|
|
i2c_reg_write(vsc_addr, GLOBAL_OUTPUT_PE1, 0);
|
|
|
|
/* Configure Tx/Rx Global Output PE2 */
|
|
i2c_reg_write(vsc_addr, GLOBAL_OUTPUT_PE2, 0);
|
|
|
|
/* Configure Tx/Rx Global Input GAIN */
|
|
i2c_reg_write(vsc_addr, GLOBAL_INPUT_GAIN, 0x3F);
|
|
|
|
/* Setting Global Input LOS threshold value */
|
|
i2c_reg_write(vsc_addr, GLOBAL_INPUT_LOS, 0xE0);
|
|
|
|
/* Setting Global output termination */
|
|
i2c_reg_write(vsc_addr, GLOBAL_OUTPUT_TERMINATION, 0);
|
|
|
|
/* Configure Tx/Rx Global Output level */
|
|
if (vsc_addr == VSC3308_TX_ADDRESS)
|
|
i2c_reg_write(vsc_addr, GLOBAL_OUTPUT_LEVEL, 4);
|
|
else
|
|
i2c_reg_write(vsc_addr, GLOBAL_OUTPUT_LEVEL, 2);
|
|
|
|
/* Making crosspoint connections, by connecting required
|
|
* input to output */
|
|
for (i = 0; i < num_con ; i++)
|
|
i2c_reg_write(vsc_addr, con_arr[i][1], con_arr[i][0]);
|
|
|
|
/* input state - page 0x13 */
|
|
i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, INPUT_STATE_REG);
|
|
/* Turning off all the required input of the switch */
|
|
for (i = 0; i < num_con; i++)
|
|
i2c_reg_write(vsc_addr, con_arr[i][0], 1);
|
|
|
|
/* only turn on specific Tx/Rx requested by the XFI erratum */
|
|
if (vsc_addr == VSC3308_TX_ADDRESS) {
|
|
i2c_reg_write(vsc_addr, 2, 0);
|
|
i2c_reg_write(vsc_addr, 3, 0);
|
|
} else {
|
|
i2c_reg_write(vsc_addr, 0, 0);
|
|
i2c_reg_write(vsc_addr, 1, 0);
|
|
}
|
|
|
|
/* config output mode - page 0x23 */
|
|
i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, OUTPUT_MODE_PAGE);
|
|
/* Turn off the Output driver correspond to required output*/
|
|
for (i = 0; i < num_con ; i++)
|
|
i2c_reg_write(vsc_addr, con_arr[i][1], 1);
|
|
|
|
/* only turn on specific Tx/Rx requested by the XFI erratum */
|
|
if (vsc_addr == VSC3308_TX_ADDRESS) {
|
|
i2c_reg_write(vsc_addr, 0, 0);
|
|
i2c_reg_write(vsc_addr, 1, 0);
|
|
} else {
|
|
i2c_reg_write(vsc_addr, 3, 0);
|
|
i2c_reg_write(vsc_addr, 4, 0);
|
|
}
|
|
|
|
/* configure global core control register, Turn on Global core power */
|
|
i2c_reg_write(vsc_addr, GLOBAL_CORE_CNTRL, 0);
|
|
|
|
vsc_wp_config(vsc_addr);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
int vsc3308_config(unsigned int vsc_addr, const int8_t con_arr[][2],
|
|
unsigned int num_con)
|
|
{
|
|
unsigned int i;
|
|
u8 rev_id = 0;
|
|
int ret;
|
|
|
|
debug("VSC:Initializing VSC3308 at I2C address 0x%x"
|
|
" for Tx\n", vsc_addr);
|
|
|
|
ret = i2c_read(vsc_addr, REVISION_ID_REG, 1, &rev_id, 1);
|
|
if (ret < 0) {
|
|
printf("VSC:0x%x could not read REV_ID from device.\n",
|
|
vsc_addr);
|
|
return ret;
|
|
}
|
|
|
|
if (rev_id != 0xab) {
|
|
printf("VSC: device at address 0x%x is not VSC3316/3308.\n",
|
|
vsc_addr);
|
|
return -ENODEV;
|
|
}
|
|
|
|
ret = vsc_if_enable(vsc_addr);
|
|
if (ret) {
|
|
printf("VSC:0x%x could not configured for 2-wire I/F.\n",
|
|
vsc_addr);
|
|
return ret;
|
|
}
|
|
|
|
/* config connections - page 0x00 */
|
|
i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, CONNECTION_CONFIG_PAGE);
|
|
|
|
/* Making crosspoint connections, by connecting required
|
|
* input to output */
|
|
for (i = 0; i < num_con ; i++)
|
|
i2c_reg_write(vsc_addr, con_arr[i][1], con_arr[i][0]);
|
|
|
|
/*Configure Global Input ISE and gain */
|
|
i2c_reg_write(vsc_addr, GLOBAL_INPUT_ISE1, 0x12);
|
|
i2c_reg_write(vsc_addr, GLOBAL_INPUT_ISE2, 0x12);
|
|
|
|
/* input state - page 0x13 */
|
|
i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, INPUT_STATE_REG);
|
|
/* Turning ON the required input of the switch */
|
|
for (i = 0; i < num_con ; i++)
|
|
i2c_reg_write(vsc_addr, con_arr[i][0], 0);
|
|
|
|
/* Setting Global Input LOS threshold value */
|
|
i2c_reg_write(vsc_addr, GLOBAL_INPUT_LOS, 0x60);
|
|
|
|
/* config output mode - page 0x23 */
|
|
i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, OUTPUT_MODE_PAGE);
|
|
/* Turn ON the Output driver correspond to required output*/
|
|
for (i = 0; i < num_con ; i++)
|
|
i2c_reg_write(vsc_addr, con_arr[i][1], 0);
|
|
|
|
/* configure global core control register, Turn on Global core power */
|
|
i2c_reg_write(vsc_addr, GLOBAL_CORE_CNTRL, 0);
|
|
|
|
vsc_wp_config(vsc_addr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void vsc_wp_config(unsigned int vsc_addr)
|
|
{
|
|
debug("VSC:Configuring VSC at address:0x%x for WP\n", vsc_addr);
|
|
|
|
/* For new crosspoint configuration to occur, WP bit of
|
|
* CORE_CONFIG_REG should be set 1 and then reset to 0 */
|
|
i2c_reg_write(vsc_addr, CORE_CONFIG_REG, 0x01);
|
|
i2c_reg_write(vsc_addr, CORE_CONFIG_REG, 0x0);
|
|
}
|