mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-29 21:38:52 +09:00
![Poddar, Sourav](/assets/img/avatar_default.png)
Currently, flash quad bit is set in "spi_flash_validate_params" and later at the end in the same api, we write 0 to status register for few flashes, thereby overriding the quad bit set. This fix moves the quad bit setting outside this api in "spi_flash_probe_slave" Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
392 lines
9.6 KiB
C
392 lines
9.6 KiB
C
/*
|
|
* SPI flash probing
|
|
*
|
|
* Copyright (C) 2008 Atmel Corporation
|
|
* Copyright (C) 2010 Reinhard Meyer, EMK Elektronik
|
|
* Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <fdtdec.h>
|
|
#include <malloc.h>
|
|
#include <spi.h>
|
|
#include <spi_flash.h>
|
|
#include <asm/io.h>
|
|
|
|
#include "sf_internal.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/* Read commands array */
|
|
static u8 spi_read_cmds_array[] = {
|
|
CMD_READ_ARRAY_SLOW,
|
|
CMD_READ_DUAL_OUTPUT_FAST,
|
|
CMD_READ_DUAL_IO_FAST,
|
|
CMD_READ_QUAD_OUTPUT_FAST,
|
|
CMD_READ_QUAD_IO_FAST,
|
|
};
|
|
|
|
#ifdef CONFIG_SPI_FLASH_MACRONIX
|
|
static int spi_flash_set_qeb_mxic(struct spi_flash *flash)
|
|
{
|
|
u8 qeb_status;
|
|
int ret;
|
|
|
|
ret = spi_flash_cmd_read_status(flash, &qeb_status);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (qeb_status & STATUS_QEB_MXIC) {
|
|
debug("SF: mxic: QEB is already set\n");
|
|
} else {
|
|
ret = spi_flash_cmd_write_status(flash, STATUS_QEB_MXIC);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND)
|
|
static int spi_flash_set_qeb_winspan(struct spi_flash *flash)
|
|
{
|
|
u8 qeb_status;
|
|
int ret;
|
|
|
|
ret = spi_flash_cmd_read_config(flash, &qeb_status);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (qeb_status & STATUS_QEB_WINSPAN) {
|
|
debug("SF: winspan: QEB is already set\n");
|
|
} else {
|
|
ret = spi_flash_cmd_write_config(flash, STATUS_QEB_WINSPAN);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
static int spi_flash_set_qeb(struct spi_flash *flash, u8 idcode0)
|
|
{
|
|
switch (idcode0) {
|
|
#ifdef CONFIG_SPI_FLASH_MACRONIX
|
|
case SPI_FLASH_CFI_MFR_MACRONIX:
|
|
return spi_flash_set_qeb_mxic(flash);
|
|
#endif
|
|
#if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND)
|
|
case SPI_FLASH_CFI_MFR_SPANSION:
|
|
case SPI_FLASH_CFI_MFR_WINBOND:
|
|
return spi_flash_set_qeb_winspan(flash);
|
|
#endif
|
|
#ifdef CONFIG_SPI_FLASH_STMICRO
|
|
case SPI_FLASH_CFI_MFR_STMICRO:
|
|
debug("SF: QEB is volatile for %02x flash\n", idcode0);
|
|
return 0;
|
|
#endif
|
|
default:
|
|
printf("SF: Need set QEB func for %02x flash\n", idcode0);
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi,
|
|
u8 *idcode)
|
|
{
|
|
const struct spi_flash_params *params;
|
|
struct spi_flash *flash;
|
|
u8 cmd;
|
|
u16 jedec = idcode[1] << 8 | idcode[2];
|
|
u16 ext_jedec = idcode[3] << 8 | idcode[4];
|
|
|
|
params = spi_flash_params_table;
|
|
for (; params->name != NULL; params++) {
|
|
if ((params->jedec >> 16) == idcode[0]) {
|
|
if ((params->jedec & 0xFFFF) == jedec) {
|
|
if (params->ext_jedec == 0)
|
|
break;
|
|
else if (params->ext_jedec == ext_jedec)
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (!params->name) {
|
|
printf("SF: Unsupported flash IDs: ");
|
|
printf("manuf %02x, jedec %04x, ext_jedec %04x\n",
|
|
idcode[0], jedec, ext_jedec);
|
|
return NULL;
|
|
}
|
|
|
|
flash = calloc(1, sizeof(*flash));
|
|
if (!flash) {
|
|
debug("SF: Failed to allocate spi_flash\n");
|
|
return NULL;
|
|
}
|
|
|
|
/* Assign spi data */
|
|
flash->spi = spi;
|
|
flash->name = params->name;
|
|
flash->memory_map = spi->memory_map;
|
|
flash->dual_flash = flash->spi->option;
|
|
|
|
/* Assign spi_flash ops */
|
|
flash->write = spi_flash_cmd_write_ops;
|
|
#ifdef CONFIG_SPI_FLASH_SST
|
|
if (params->flags & SST_WP)
|
|
flash->write = sst_write_wp;
|
|
#endif
|
|
flash->erase = spi_flash_cmd_erase_ops;
|
|
flash->read = spi_flash_cmd_read_ops;
|
|
|
|
/* Compute the flash size */
|
|
flash->shift = (flash->dual_flash & SF_DUAL_PARALLEL_FLASH) ? 1 : 0;
|
|
/*
|
|
* The Spansion S25FL032P and S25FL064P have 256b pages, yet use the
|
|
* 0x4d00 Extended JEDEC code. The rest of the Spansion flashes with
|
|
* the 0x4d00 Extended JEDEC code have 512b pages. All of the others
|
|
* have 256b pages.
|
|
*/
|
|
if (ext_jedec == 0x4d00) {
|
|
if ((jedec == 0x0215) || (jedec == 0x216))
|
|
flash->page_size = 256;
|
|
else
|
|
flash->page_size = 512;
|
|
} else {
|
|
flash->page_size = 256;
|
|
}
|
|
flash->page_size <<= flash->shift;
|
|
flash->sector_size = params->sector_size << flash->shift;
|
|
flash->size = flash->sector_size * params->nr_sectors << flash->shift;
|
|
#ifdef CONFIG_SF_DUAL_FLASH
|
|
if (flash->dual_flash & SF_DUAL_STACKED_FLASH)
|
|
flash->size <<= 1;
|
|
#endif
|
|
|
|
/* Compute erase sector and command */
|
|
if (params->flags & SECT_4K) {
|
|
flash->erase_cmd = CMD_ERASE_4K;
|
|
flash->erase_size = 4096 << flash->shift;
|
|
} else if (params->flags & SECT_32K) {
|
|
flash->erase_cmd = CMD_ERASE_32K;
|
|
flash->erase_size = 32768 << flash->shift;
|
|
} else {
|
|
flash->erase_cmd = CMD_ERASE_64K;
|
|
flash->erase_size = flash->sector_size;
|
|
}
|
|
|
|
/* Look for the fastest read cmd */
|
|
cmd = fls(params->e_rd_cmd & flash->spi->op_mode_rx);
|
|
if (cmd) {
|
|
cmd = spi_read_cmds_array[cmd - 1];
|
|
flash->read_cmd = cmd;
|
|
} else {
|
|
/* Go for default supported read cmd */
|
|
flash->read_cmd = CMD_READ_ARRAY_FAST;
|
|
}
|
|
|
|
/* Not require to look for fastest only two write cmds yet */
|
|
if (params->flags & WR_QPP && flash->spi->op_mode_tx & SPI_OPM_TX_QPP)
|
|
flash->write_cmd = CMD_QUAD_PAGE_PROGRAM;
|
|
else
|
|
/* Go for default supported write cmd */
|
|
flash->write_cmd = CMD_PAGE_PROGRAM;
|
|
|
|
/* Read dummy_byte: dummy byte is determined based on the
|
|
* dummy cycles of a particular command.
|
|
* Fast commands - dummy_byte = dummy_cycles/8
|
|
* I/O commands- dummy_byte = (dummy_cycles * no.of lines)/8
|
|
* For I/O commands except cmd[0] everything goes on no.of lines
|
|
* based on particular command but incase of fast commands except
|
|
* data all go on single line irrespective of command.
|
|
*/
|
|
switch (flash->read_cmd) {
|
|
case CMD_READ_QUAD_IO_FAST:
|
|
flash->dummy_byte = 2;
|
|
break;
|
|
case CMD_READ_ARRAY_SLOW:
|
|
flash->dummy_byte = 0;
|
|
break;
|
|
default:
|
|
flash->dummy_byte = 1;
|
|
}
|
|
|
|
/* Poll cmd selection */
|
|
flash->poll_cmd = CMD_READ_STATUS;
|
|
#ifdef CONFIG_SPI_FLASH_STMICRO
|
|
if (params->flags & E_FSR)
|
|
flash->poll_cmd = CMD_FLAG_STATUS;
|
|
#endif
|
|
|
|
/* Configure the BAR - discover bank cmds and read current bank */
|
|
#ifdef CONFIG_SPI_FLASH_BAR
|
|
u8 curr_bank = 0;
|
|
if (flash->size > SPI_FLASH_16MB_BOUN) {
|
|
flash->bank_read_cmd = (idcode[0] == 0x01) ?
|
|
CMD_BANKADDR_BRRD : CMD_EXTNADDR_RDEAR;
|
|
flash->bank_write_cmd = (idcode[0] == 0x01) ?
|
|
CMD_BANKADDR_BRWR : CMD_EXTNADDR_WREAR;
|
|
|
|
if (spi_flash_read_common(flash, &flash->bank_read_cmd, 1,
|
|
&curr_bank, 1)) {
|
|
debug("SF: fail to read bank addr register\n");
|
|
return NULL;
|
|
}
|
|
flash->bank_curr = curr_bank;
|
|
} else {
|
|
flash->bank_curr = curr_bank;
|
|
}
|
|
#endif
|
|
|
|
/* Flash powers up read-only, so clear BP# bits */
|
|
#if defined(CONFIG_SPI_FLASH_ATMEL) || \
|
|
defined(CONFIG_SPI_FLASH_MACRONIX) || \
|
|
defined(CONFIG_SPI_FLASH_SST)
|
|
spi_flash_cmd_write_status(flash, 0);
|
|
#endif
|
|
|
|
return flash;
|
|
}
|
|
|
|
#ifdef CONFIG_OF_CONTROL
|
|
int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash)
|
|
{
|
|
fdt_addr_t addr;
|
|
fdt_size_t size;
|
|
int node;
|
|
|
|
/* If there is no node, do nothing */
|
|
node = fdtdec_next_compatible(blob, 0, COMPAT_GENERIC_SPI_FLASH);
|
|
if (node < 0)
|
|
return 0;
|
|
|
|
addr = fdtdec_get_addr_size(blob, node, "memory-map", &size);
|
|
if (addr == FDT_ADDR_T_NONE) {
|
|
debug("%s: Cannot decode address\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
if (flash->size != size) {
|
|
debug("%s: Memory map must cover entire device\n", __func__);
|
|
return -1;
|
|
}
|
|
flash->memory_map = map_sysmem(addr, size);
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_OF_CONTROL */
|
|
|
|
static struct spi_flash *spi_flash_probe_slave(struct spi_slave *spi)
|
|
{
|
|
struct spi_flash *flash = NULL;
|
|
u8 idcode[5];
|
|
int ret;
|
|
|
|
/* Setup spi_slave */
|
|
if (!spi) {
|
|
printf("SF: Failed to set up slave\n");
|
|
return NULL;
|
|
}
|
|
|
|
/* Claim spi bus */
|
|
ret = spi_claim_bus(spi);
|
|
if (ret) {
|
|
debug("SF: Failed to claim SPI bus: %d\n", ret);
|
|
goto err_claim_bus;
|
|
}
|
|
|
|
/* Read the ID codes */
|
|
ret = spi_flash_cmd(spi, CMD_READ_ID, idcode, sizeof(idcode));
|
|
if (ret) {
|
|
printf("SF: Failed to get idcodes\n");
|
|
goto err_read_id;
|
|
}
|
|
|
|
#ifdef DEBUG
|
|
printf("SF: Got idcodes\n");
|
|
print_buffer(0, idcode, 1, sizeof(idcode), 0);
|
|
#endif
|
|
|
|
/* Validate params from spi_flash_params table */
|
|
flash = spi_flash_validate_params(spi, idcode);
|
|
if (!flash)
|
|
goto err_read_id;
|
|
|
|
/* Set the quad enable bit - only for quad commands */
|
|
if ((flash->read_cmd == CMD_READ_QUAD_OUTPUT_FAST) ||
|
|
(flash->read_cmd == CMD_READ_QUAD_IO_FAST) ||
|
|
(flash->write_cmd == CMD_QUAD_PAGE_PROGRAM)) {
|
|
if (spi_flash_set_qeb(flash, idcode[0])) {
|
|
debug("SF: Fail to set QEB for %02x\n", idcode[0]);
|
|
return NULL;
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_OF_CONTROL
|
|
if (spi_flash_decode_fdt(gd->fdt_blob, flash)) {
|
|
debug("SF: FDT decode error\n");
|
|
goto err_read_id;
|
|
}
|
|
#endif
|
|
#ifndef CONFIG_SPL_BUILD
|
|
printf("SF: Detected %s with page size ", flash->name);
|
|
print_size(flash->page_size, ", erase size ");
|
|
print_size(flash->erase_size, ", total ");
|
|
print_size(flash->size, "");
|
|
if (flash->memory_map)
|
|
printf(", mapped at %p", flash->memory_map);
|
|
puts("\n");
|
|
#endif
|
|
#ifndef CONFIG_SPI_FLASH_BAR
|
|
if (((flash->dual_flash == SF_SINGLE_FLASH) &&
|
|
(flash->size > SPI_FLASH_16MB_BOUN)) ||
|
|
((flash->dual_flash > SF_SINGLE_FLASH) &&
|
|
(flash->size > SPI_FLASH_16MB_BOUN << 1))) {
|
|
puts("SF: Warning - Only lower 16MiB accessible,");
|
|
puts(" Full access #define CONFIG_SPI_FLASH_BAR\n");
|
|
}
|
|
#endif
|
|
|
|
/* Release spi bus */
|
|
spi_release_bus(spi);
|
|
|
|
return flash;
|
|
|
|
err_read_id:
|
|
spi_release_bus(spi);
|
|
err_claim_bus:
|
|
spi_free_slave(spi);
|
|
return NULL;
|
|
}
|
|
|
|
struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
|
|
unsigned int max_hz, unsigned int spi_mode)
|
|
{
|
|
struct spi_slave *spi;
|
|
|
|
spi = spi_setup_slave(bus, cs, max_hz, spi_mode);
|
|
return spi_flash_probe_slave(spi);
|
|
}
|
|
|
|
#ifdef CONFIG_OF_SPI_FLASH
|
|
struct spi_flash *spi_flash_probe_fdt(const void *blob, int slave_node,
|
|
int spi_node)
|
|
{
|
|
struct spi_slave *spi;
|
|
|
|
spi = spi_setup_slave_fdt(blob, slave_node, spi_node);
|
|
return spi_flash_probe_slave(spi);
|
|
}
|
|
#endif
|
|
|
|
void spi_flash_free(struct spi_flash *flash)
|
|
{
|
|
spi_free_slave(flash->spi);
|
|
free(flash);
|
|
}
|