mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-15 06:33:45 +09:00
![Aneesh V](/assets/img/avatar_default.png)
Change the CONFIG_SYS_TEXT_BASE and the addresses of SDRAM buffers used by SPL(heap and BSS) keeping in mind the following requirements: 1. Make sure that SPL's heap and BSS doesn't come in the way of Linux kernel, which is typically loaded at 0x80008000. This will be important when SPL directly loads kernel. 2. Align the CONFIG_SYS_TEXT_BASE between TI internal U-Boot and mainline U-Boot. This avoids a lot of confusion and allows for the inter-operability of x-loader, SPL, internal U-Boot, mainline U-Boot etc. The internal U-Boot's address can not be changed to that of mainline U-Boot as internal U-Boot doesn't have relocation and 0x80100000 used by mainline U-Boot will clash with kernel 3. Assume only a minimum amount of memory that may be available on any practical OMAP4/5 board in future too. We are assuming a minimum of 128 MB of memory Signed-off-by: Aneesh V <aneesh@ti.com>
288 lines
7.7 KiB
C
288 lines
7.7 KiB
C
/*
|
|
* (C) Copyright 2010
|
|
* Texas Instruments Incorporated.
|
|
* Sricharan R <r.sricharan@ti.com>
|
|
*
|
|
* Derived from OMAP4 done by:
|
|
* Aneesh V <aneesh@ti.com>
|
|
*
|
|
* Configuration settings for the TI EVM5430 board.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
*/
|
|
#define CONFIG_ARMV7 /* This is an ARM V7 CPU core */
|
|
#define CONFIG_OMAP /* in a TI OMAP core */
|
|
#define CONFIG_OMAP54XX /* which is a 54XX */
|
|
#define CONFIG_OMAP5430 /* which is in a 5430 */
|
|
#define CONFIG_5430EVM /* working with EVM */
|
|
#define CONFIG_ARCH_CPU_INIT
|
|
|
|
/* Get CPU defs */
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/omap.h>
|
|
|
|
/* Display CPU and Board Info */
|
|
#define CONFIG_DISPLAY_CPUINFO
|
|
#define CONFIG_DISPLAY_BOARDINFO
|
|
|
|
/* Clock Defines */
|
|
#define V_OSCK 38400000 /* Clock output from T2 */
|
|
#define V_SCLK V_OSCK
|
|
|
|
#undef CONFIG_USE_IRQ /* no support for IRQs */
|
|
#define CONFIG_MISC_INIT_R
|
|
|
|
#define CONFIG_OF_LIBFDT
|
|
|
|
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
|
|
#define CONFIG_SETUP_MEMORY_TAGS
|
|
#define CONFIG_INITRD_TAG
|
|
|
|
/*
|
|
* Size of malloc() pool
|
|
* Total Size Environment - 128k
|
|
* Malloc - add 256k
|
|
*/
|
|
#define CONFIG_ENV_SIZE (128 << 10)
|
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (256 << 10))
|
|
/* Vector Base */
|
|
#define CONFIG_SYS_CA9_VECTOR_BASE SRAM_ROM_VECT_BASE
|
|
|
|
/*
|
|
* Hardware drivers
|
|
*/
|
|
|
|
/*
|
|
* serial port - NS16550 compatible
|
|
*/
|
|
#define V_NS16550_CLK 48000000
|
|
|
|
#define CONFIG_SYS_NS16550
|
|
#define CONFIG_SYS_NS16550_SERIAL
|
|
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
|
|
#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
|
|
#define CONFIG_CONS_INDEX 3
|
|
#define CONFIG_SYS_NS16550_COM3 UART3_BASE
|
|
|
|
#define CONFIG_BAUDRATE 115200
|
|
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
|
|
115200}
|
|
/* I2C */
|
|
#define CONFIG_HARD_I2C
|
|
#define CONFIG_SYS_I2C_SPEED 100000
|
|
#define CONFIG_SYS_I2C_SLAVE 1
|
|
#define CONFIG_DRIVER_OMAP34XX_I2C
|
|
#define CONFIG_I2C_MULTI_BUS
|
|
|
|
/* TWL6030 */
|
|
#define CONFIG_TWL6030_POWER
|
|
#define CONFIG_CMD_BAT
|
|
|
|
/* MMC */
|
|
#define CONFIG_GENERIC_MMC
|
|
#define CONFIG_MMC
|
|
#define CONFIG_OMAP_HSMMC
|
|
#define CONFIG_DOS_PARTITION
|
|
|
|
/* MMC ENV related defines */
|
|
#define CONFIG_ENV_IS_IN_MMC
|
|
#define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */
|
|
#define CONFIG_ENV_OFFSET 0xE0000
|
|
|
|
/* USB */
|
|
#define CONFIG_MUSB_UDC
|
|
#define CONFIG_USB_OMAP3
|
|
|
|
/* USB device configuration */
|
|
#define CONFIG_USB_DEVICE
|
|
#define CONFIG_USB_TTY
|
|
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
|
|
|
|
/* Flash */
|
|
#define CONFIG_SYS_NO_FLASH
|
|
|
|
/* Cache */
|
|
#define CONFIG_SYS_CACHELINE_SIZE 64
|
|
#define CONFIG_SYS_CACHELINE_SHIFT 6
|
|
|
|
/* commands to include */
|
|
#include <config_cmd_default.h>
|
|
|
|
/* Enabled commands */
|
|
#define CONFIG_CMD_EXT2 /* EXT2 Support */
|
|
#define CONFIG_CMD_FAT /* FAT support */
|
|
#define CONFIG_CMD_I2C /* I2C serial bus support */
|
|
#define CONFIG_CMD_MMC /* MMC support */
|
|
#define CONFIG_CMD_SAVEENV
|
|
|
|
/* Disabled commands */
|
|
#undef CONFIG_CMD_NET
|
|
#undef CONFIG_CMD_NFS
|
|
#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
|
|
#undef CONFIG_CMD_IMLS /* List all found images */
|
|
|
|
/*
|
|
* Environment setup
|
|
*/
|
|
|
|
#define CONFIG_BOOTDELAY 3
|
|
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"loadaddr=0x82000000\0" \
|
|
"console=ttyS2,115200n8\0" \
|
|
"usbtty=cdc_acm\0" \
|
|
"vram=16M\0" \
|
|
"mmcdev=0\0" \
|
|
"mmcroot=/dev/mmcblk0p2 rw\0" \
|
|
"mmcrootfstype=ext3 rootwait\0" \
|
|
"mmcargs=setenv bootargs console=${console} " \
|
|
"vram=${vram} " \
|
|
"root=${mmcroot} " \
|
|
"rootfstype=${mmcrootfstype}\0" \
|
|
"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
|
|
"bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
|
|
"source ${loadaddr}\0" \
|
|
"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
|
|
"mmcboot=echo Booting from mmc${mmcdev} ...; " \
|
|
"run mmcargs; " \
|
|
"bootm ${loadaddr}\0" \
|
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"if mmc rescan ${mmcdev}; then " \
|
|
"if run loadbootscript; then " \
|
|
"run bootscript; " \
|
|
"else " \
|
|
"if run loaduimage; then " \
|
|
"run mmcboot; " \
|
|
"fi; " \
|
|
"fi; " \
|
|
"fi"
|
|
|
|
#define CONFIG_AUTO_COMPLETE 1
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
|
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
|
|
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
|
|
#define CONFIG_SYS_PROMPT "OMAP5430 EVM # "
|
|
#define CONFIG_SYS_CBSIZE 256
|
|
/* Print Buffer Size */
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
|
|
sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
#define CONFIG_SYS_MAXARGS 16
|
|
/* Boot Argument Buffer Size */
|
|
#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
|
|
|
|
/*
|
|
* memtest setup
|
|
*/
|
|
#define CONFIG_SYS_MEMTEST_START 0x80000000
|
|
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (32 << 20))
|
|
|
|
/* Default load address */
|
|
#define CONFIG_SYS_LOAD_ADDR 0x80000000
|
|
|
|
/* Use General purpose timer 1 */
|
|
#define CONFIG_SYS_TIMERBASE GPT2_BASE
|
|
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
|
|
#define CONFIG_SYS_HZ 1000
|
|
|
|
/*
|
|
* Stack sizes
|
|
*
|
|
* The stack sizes are set up in start.S using the settings below
|
|
*/
|
|
#define CONFIG_STACKSIZE (128 << 10) /* Regular stack */
|
|
#ifdef CONFIG_USE_IRQ
|
|
#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack */
|
|
#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack */
|
|
#endif
|
|
|
|
/*
|
|
* SDRAM Memory Map
|
|
* Even though we use two CS all the memory
|
|
* is mapped to one contiguous block
|
|
*/
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE 0x80000000
|
|
#define CONFIG_SYS_INIT_RAM_ADDR 0x4030D800
|
|
#define CONFIG_SYS_INIT_RAM_SIZE 0x800
|
|
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
|
|
CONFIG_SYS_INIT_RAM_SIZE - \
|
|
GENERATED_GBL_DATA_SIZE)
|
|
|
|
#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
|
|
|
|
/* Defines for SDRAM init */
|
|
#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
|
|
#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
|
|
#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
|
|
#endif
|
|
|
|
/* Defines for SPL */
|
|
#define CONFIG_SPL
|
|
#define CONFIG_SPL_TEXT_BASE 0x40304350
|
|
#define CONFIG_SPL_MAX_SIZE 0x1E000 /* 120K */
|
|
#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
|
|
|
|
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
|
|
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
|
|
#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
|
|
#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
|
|
|
|
#define CONFIG_SPL_LIBCOMMON_SUPPORT
|
|
#define CONFIG_SPL_LIBDISK_SUPPORT
|
|
#define CONFIG_SPL_I2C_SUPPORT
|
|
#define CONFIG_SPL_MMC_SUPPORT
|
|
#define CONFIG_SPL_FAT_SUPPORT
|
|
#define CONFIG_SPL_LIBGENERIC_SUPPORT
|
|
#define CONFIG_SPL_SERIAL_SUPPORT
|
|
#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/omap-common/u-boot-spl.lds"
|
|
|
|
/*
|
|
* 64 bytes before this address should be set aside for u-boot.img's
|
|
* header. That is 80E7FFC0--0x80E80000 should not be used for any
|
|
* other needs.
|
|
*/
|
|
#define CONFIG_SYS_TEXT_BASE 0x80E80000
|
|
|
|
/*
|
|
* BSS and malloc area 64MB into memory to allow enough
|
|
* space for the kernel at the beginning of memory
|
|
*/
|
|
#define CONFIG_SPL_BSS_START_ADDR 0x84000000
|
|
#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */
|
|
#define CONFIG_SYS_SPL_MALLOC_START 0x84100000
|
|
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */
|
|
|
|
#endif /* __CONFIG_H */
|