Hans de Goede 1aac47bd1b sun6i: clock_set_pll5: Calculate k and m rather then hardcoding them ... Our old hardcoded k and m values are based on PLL5 being configured in steps of 48 MHz, which is correct for sun6i where the DRAM PLL runs at twice the DRAM CLK, which is usually configured in 24 MHz step. But on the A23 (sun8i) the PLL5 runs at half the DRAM CLK, so we require 12 MHz steps. This commit adjusts clock_set_pll5 to automatically select the best k and m depending on the requested clk rate. Suggested-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>		2015-01-14 14:56:37 +01:00
..
arm720t	kbuild: use SoC-specific CONFIG to descend into SoC directory	2014-11-23 06:49:02 -05:00
arm920t	kbuild: use SoC-specific CONFIG to descend into SoC directory	2014-11-23 06:49:02 -05:00
arm926ejs	mx25: Fix boot hang by avoiding vector relocation	2015-01-08 13:50:17 -05:00
arm946es	arm: move exception handling out of start.S files	2014-05-15 16:24:53 +02:00
arm1136	kbuild: use SoC-specific CONFIG to descend into SoC directory	2014-11-23 06:49:02 -05:00
arm1176	kbuild: use SoC-specific CONFIG to descend into SoC directory	2014-11-23 06:49:02 -05:00
armv7	sun6i: clock_set_pll5: Calculate k and m rather then hardcoding them	2015-01-14 14:56:37 +01:00
armv8	kbuild: use SoC-specific CONFIG to descend into SoC directory	2014-11-23 06:49:02 -05:00
at91-common	arm, spl, at91: add at91sam9260 and at91sam9g45 spl support	2014-11-17 08:47:17 -05:00
pxa	arm: move exception handling out of start.S files	2014-05-15 16:24:53 +02:00
sa1100	arm: move exception handling out of start.S files	2014-05-15 16:24:53 +02:00
tegra20-common	ARM: tegra: Provide PCIEXCLK reset ID	2014-12-18 13:19:20 -07:00
tegra30-common	ARM: tegra: Provide PCIEXCLK reset ID	2014-12-18 13:19:20 -07:00
tegra114-common	ARM: tegra: Tegra114 pinmux cleanup	2014-04-17 08:41:06 -07:00
tegra124-common	ARM: tegra: Implement XUSB pad controller	2014-12-18 13:19:20 -07:00
tegra-common	ARM: tegra: Implement XUSB pad controller	2014-12-18 13:19:20 -07:00
Makefile	kbuild: use boolean macros to select tegra*-common directory	2014-04-17 17:44:35 -04:00
u-boot-spl.lds	arm: spl: Add I2C linker list in generic .lds	2014-12-11 09:38:35 -08:00
u-boot.lds	ARM: HYP/non-sec: add separate section for secure code	2014-07-28 17:07:23 +02:00