mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 17:08:52 +09:00
![Peng Fan](/assets/img/avatar_default.png)
1. Add DDR script for mx6qpsabreauto board. 2. On CPU3 board, enet RGMII tx clock is from internal PLL. Set the GPR5[9] and init the enet pll output to 125Mhz. 3. On CPU3 board, SW1ABC=VDDSOC_IN, SW2=VDDARM_IN. Build target: mx6qpsabreauto_config Boot Log: U-Boot 2015.07-rc2-00071-gfd985ff (Jun 29 2015 - 22:10:55 +0800) CPU: Freescale i.MX6QP rev1.0 996 MHz (running at 792 MHz) CPU: Automotive temperature grade (-40C to 125C) at 34C Reset cause: POR Board: MX6Q-Sabreauto revA I2C: ready DRAM: 2 GiB PMIC: PFUZE100 ID=0x10 Flash: 32 MiB NAND: 0 MiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment No panel detected: default to HDMI Display: HDMI (1024x768) In: serial Out: serial Err: serial Net: FEC [PRIME] Hit any key to stop autoboot: 0 Note: In this patch, we still add a new config mx6qpsabreauto_config, since SPL is not supported now, and IMX_CONFIG is needed at build time, so add this config. Future, when SPL is converted, this config can be removed. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Robin Gong <b38343@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
146 lines
3.9 KiB
INI
146 lines
3.9 KiB
INI
/*
|
|
* Copyright (C) 2015 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*
|
|
* Refer doc/README.imximage for more details about how-to configure
|
|
* and create imximage boot image
|
|
*
|
|
* The syntax is taken as close as possible with the kwbimage
|
|
*/
|
|
/* image version */
|
|
|
|
#define __ASSEMBLY__
|
|
#include <config.h>
|
|
|
|
IMAGE_VERSION 2
|
|
|
|
/*
|
|
* Boot Device : one of spi, sd, eimnor, nand, sata:
|
|
* spinor: flash_offset: 0x0400
|
|
* nand: flash_offset: 0x0400
|
|
* sata: flash_offset: 0x0400
|
|
* sd/mmc: flash_offset: 0x0400
|
|
* eimnor: flash_offset: 0x1000
|
|
*/
|
|
BOOT_FROM sd
|
|
|
|
/*
|
|
* Device Configuration Data (DCD)
|
|
*
|
|
* Each entry must have the format:
|
|
* Addr-type Address Value
|
|
*
|
|
* where:
|
|
* Addr-type register length (1,2 or 4 bytes)
|
|
* Address absolute address of the register
|
|
* value value to be stored in the register
|
|
*/
|
|
DATA 4 0x020e0798 0x000C0000
|
|
DATA 4 0x020e0758 0x00000000
|
|
DATA 4 0x020e0588 0x00000030
|
|
DATA 4 0x020e0594 0x00000030
|
|
DATA 4 0x020e056c 0x00000030
|
|
DATA 4 0x020e0578 0x00000030
|
|
DATA 4 0x020e074c 0x00000030
|
|
DATA 4 0x020e057c 0x00000030
|
|
DATA 4 0x020e058c 0x00000000
|
|
DATA 4 0x020e059c 0x00000030
|
|
DATA 4 0x020e05a0 0x00000030
|
|
DATA 4 0x020e078c 0x00000030
|
|
DATA 4 0x020e0750 0x00020000
|
|
DATA 4 0x020e05a8 0x00000030
|
|
DATA 4 0x020e05b0 0x00000030
|
|
DATA 4 0x020e0524 0x00000030
|
|
DATA 4 0x020e051c 0x00000030
|
|
DATA 4 0x020e0518 0x00000030
|
|
DATA 4 0x020e050c 0x00000030
|
|
DATA 4 0x020e05b8 0x00000030
|
|
DATA 4 0x020e05c0 0x00000030
|
|
DATA 4 0x020e0774 0x00020000
|
|
DATA 4 0x020e0784 0x00000030
|
|
DATA 4 0x020e0788 0x00000030
|
|
DATA 4 0x020e0794 0x00000030
|
|
DATA 4 0x020e079c 0x00000030
|
|
DATA 4 0x020e07a0 0x00000030
|
|
DATA 4 0x020e07a4 0x00000030
|
|
DATA 4 0x020e07a8 0x00000030
|
|
DATA 4 0x020e0748 0x00000030
|
|
DATA 4 0x020e05ac 0x00000030
|
|
DATA 4 0x020e05b4 0x00000030
|
|
DATA 4 0x020e0528 0x00000030
|
|
DATA 4 0x020e0520 0x00000030
|
|
DATA 4 0x020e0514 0x00000030
|
|
DATA 4 0x020e0510 0x00000030
|
|
DATA 4 0x020e05bc 0x00000030
|
|
DATA 4 0x020e05c4 0x00000030
|
|
DATA 4 0x021b0800 0xa1390003
|
|
DATA 4 0x021b080c 0x001b001e
|
|
DATA 4 0x021b0810 0x002e0029
|
|
DATA 4 0x021b480c 0x001b002a
|
|
DATA 4 0x021b4810 0x0019002c
|
|
DATA 4 0x021b083c 0x43240334
|
|
DATA 4 0x021b0840 0x0324031a
|
|
DATA 4 0x021b483c 0x43340344
|
|
DATA 4 0x021b4840 0x03280276
|
|
DATA 4 0x021b0848 0x44383A3E
|
|
DATA 4 0x021b4848 0x3C3C3846
|
|
DATA 4 0x021b0850 0x2e303230
|
|
DATA 4 0x021b4850 0x38283E34
|
|
DATA 4 0x021b081c 0x33333333
|
|
DATA 4 0x021b0820 0x33333333
|
|
DATA 4 0x021b0824 0x33333333
|
|
DATA 4 0x021b0828 0x33333333
|
|
DATA 4 0x021b481c 0x33333333
|
|
DATA 4 0x021b4820 0x33333333
|
|
DATA 4 0x021b4824 0x33333333
|
|
DATA 4 0x021b4828 0x33333333
|
|
DATA 4 0x021b08c0 0x24912492
|
|
DATA 4 0x021b48c0 0x24912492
|
|
DATA 4 0x021b08b8 0x00000800
|
|
DATA 4 0x021b48b8 0x00000800
|
|
DATA 4 0x021b0004 0x00020036
|
|
DATA 4 0x021b0008 0x09444040
|
|
DATA 4 0x021b000c 0x898E7955
|
|
DATA 4 0x021b0010 0xFF328F64
|
|
DATA 4 0x021b0014 0x01FF00DB
|
|
DATA 4 0x021b0018 0x00001740
|
|
DATA 4 0x021b001c 0x00008000
|
|
|
|
DATA 4 0x021b002c 0x000026d2
|
|
DATA 4 0x021b0030 0x008E1023
|
|
DATA 4 0x021b0040 0x00000047
|
|
DATA 4 0x021b0400 0x14420000
|
|
DATA 4 0x021b0000 0x841A0000
|
|
DATA 4 0x00bb0008 0x00000004
|
|
DATA 4 0x00bb000c 0x2891E41A
|
|
DATA 4 0x00bb0038 0x00000564
|
|
DATA 4 0x00bb0014 0x00000040
|
|
DATA 4 0x00bb0028 0x00000020
|
|
DATA 4 0x00bb002c 0x00000020
|
|
DATA 4 0x021b001c 0x04088032
|
|
DATA 4 0x021b001c 0x00008033
|
|
DATA 4 0x021b001c 0x00048031
|
|
DATA 4 0x021b001c 0x09408030
|
|
DATA 4 0x021b001c 0x04008040
|
|
DATA 4 0x021b0020 0x00005800
|
|
DATA 4 0x021b0818 0x00011117
|
|
DATA 4 0x021b4818 0x00011117
|
|
DATA 4 0x021b0004 0x00025576
|
|
DATA 4 0x021b0404 0x00011006
|
|
DATA 4 0x021b001c 0x00000000
|
|
/* set the default clock gate to save power */
|
|
DATA 4, 0x020c4068, 0x00C03F3F
|
|
DATA 4, 0x020c406c, 0x0030FC03
|
|
DATA 4, 0x020c4070, 0x0FFFC000
|
|
DATA 4, 0x020c4074, 0x3FF00000
|
|
DATA 4, 0x020c4078, 0xFFFFF300
|
|
DATA 4, 0x020c407c, 0x0F0000F3
|
|
DATA 4, 0x020c4080, 0x00000FFF
|
|
|
|
/* enable AXI cache for VDOA/VPU/IPU */
|
|
DATA 4, 0x020e0010, 0xF00000CF
|
|
/* set IPU AXI-id1 Qos=0x1 AXI-id0/2/3 Qos=0x7 */
|
|
DATA 4, 0x020e0018, 0x77177717
|
|
DATA 4, 0x020e001c, 0x77177717
|