mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 17:08:52 +09:00
![York Sun](/assets/img/avatar_default.png)
MC and debug server are not board-specific. Move reserving memory to SoC file, using the new board_reserve_ram_top function. Reduce debug server memory by 2MB to make room for secure memory. In the system with MC and debug server, the top of u-boot memory is not the end of memory. PRAM is not used for this reservation. Signed-off-by: York Sun <yorksun@freescale.com>
305 lines
5.6 KiB
C
305 lines
5.6 KiB
C
/*
|
|
* Copyright 2015 Freescale Semiconductor
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
#include <common.h>
|
|
#include <malloc.h>
|
|
#include <errno.h>
|
|
#include <netdev.h>
|
|
#include <fsl_ifc.h>
|
|
#include <fsl_ddr.h>
|
|
#include <asm/io.h>
|
|
#include <hwconfig.h>
|
|
#include <fdt_support.h>
|
|
#include <libfdt.h>
|
|
#include <fsl_debug_server.h>
|
|
#include <fsl-mc/fsl_mc.h>
|
|
#include <environment.h>
|
|
#include <i2c.h>
|
|
#include <asm/arch/soc.h>
|
|
|
|
#include "../common/qixis.h"
|
|
#include "ls2080ardb_qixis.h"
|
|
|
|
#define PIN_MUX_SEL_SDHC 0x00
|
|
#define PIN_MUX_SEL_DSPI 0x0a
|
|
|
|
#define SET_SDHC_MUX_SEL(reg, value) ((reg & 0xf0) | value)
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
enum {
|
|
MUX_TYPE_SDHC,
|
|
MUX_TYPE_DSPI,
|
|
};
|
|
|
|
unsigned long long get_qixis_addr(void)
|
|
{
|
|
unsigned long long addr;
|
|
|
|
if (gd->flags & GD_FLG_RELOC)
|
|
addr = QIXIS_BASE_PHYS;
|
|
else
|
|
addr = QIXIS_BASE_PHYS_EARLY;
|
|
|
|
/*
|
|
* IFC address under 256MB is mapped to 0x30000000, any address above
|
|
* is mapped to 0x5_10000000 up to 4GB.
|
|
*/
|
|
addr = addr > 0x10000000 ? addr + 0x500000000ULL : addr + 0x30000000;
|
|
|
|
return addr;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
u8 sw;
|
|
char buf[15];
|
|
|
|
cpu_name(buf);
|
|
printf("Board: %s-RDB, ", buf);
|
|
|
|
sw = QIXIS_READ(arch);
|
|
printf("Board Arch: V%d, ", sw >> 4);
|
|
printf("Board version: %c, boot from ", (sw & 0xf) + 'A');
|
|
|
|
sw = QIXIS_READ(brdcfg[0]);
|
|
sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
|
|
|
|
if (sw < 0x8)
|
|
printf("vBank: %d\n", sw);
|
|
else if (sw == 0x9)
|
|
puts("NAND\n");
|
|
else
|
|
printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
|
|
|
|
printf("FPGA: v%d.%d\n", QIXIS_READ(scver), QIXIS_READ(tagdata));
|
|
|
|
puts("SERDES1 Reference : ");
|
|
printf("Clock1 = 156.25MHz ");
|
|
printf("Clock2 = 156.25MHz");
|
|
|
|
puts("\nSERDES2 Reference : ");
|
|
printf("Clock1 = 100MHz ");
|
|
printf("Clock2 = 100MHz\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
unsigned long get_board_sys_clk(void)
|
|
{
|
|
u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
|
|
|
|
switch (sysclk_conf & 0x0F) {
|
|
case QIXIS_SYSCLK_83:
|
|
return 83333333;
|
|
case QIXIS_SYSCLK_100:
|
|
return 100000000;
|
|
case QIXIS_SYSCLK_125:
|
|
return 125000000;
|
|
case QIXIS_SYSCLK_133:
|
|
return 133333333;
|
|
case QIXIS_SYSCLK_150:
|
|
return 150000000;
|
|
case QIXIS_SYSCLK_160:
|
|
return 160000000;
|
|
case QIXIS_SYSCLK_166:
|
|
return 166666666;
|
|
}
|
|
return 66666666;
|
|
}
|
|
|
|
int select_i2c_ch_pca9547(u8 ch)
|
|
{
|
|
int ret;
|
|
|
|
ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
|
|
if (ret) {
|
|
puts("PCA: failed to select proper channel\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int config_board_mux(int ctrl_type)
|
|
{
|
|
u8 reg5;
|
|
|
|
reg5 = QIXIS_READ(brdcfg[5]);
|
|
|
|
switch (ctrl_type) {
|
|
case MUX_TYPE_SDHC:
|
|
reg5 = SET_SDHC_MUX_SEL(reg5, PIN_MUX_SEL_SDHC);
|
|
break;
|
|
case MUX_TYPE_DSPI:
|
|
reg5 = SET_SDHC_MUX_SEL(reg5, PIN_MUX_SEL_DSPI);
|
|
break;
|
|
default:
|
|
printf("Wrong mux interface type\n");
|
|
return -1;
|
|
}
|
|
|
|
QIXIS_WRITE(brdcfg[5], reg5);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
char *env_hwconfig;
|
|
u32 __iomem *dcfg_ccsr = (u32 __iomem *)DCFG_BASE;
|
|
u32 val;
|
|
|
|
init_final_memctl_regs();
|
|
|
|
val = in_le32(dcfg_ccsr + DCFG_RCWSR13 / 4);
|
|
|
|
env_hwconfig = getenv("hwconfig");
|
|
|
|
if (hwconfig_f("dspi", env_hwconfig) &&
|
|
DCFG_RCWSR13_DSPI == (val & (u32)(0xf << 8)))
|
|
config_board_mux(MUX_TYPE_DSPI);
|
|
else
|
|
config_board_mux(MUX_TYPE_SDHC);
|
|
|
|
#ifdef CONFIG_ENV_IS_NOWHERE
|
|
gd->env_addr = (ulong)&default_environment[0];
|
|
#endif
|
|
select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
|
|
|
|
QIXIS_WRITE(rst_ctl, QIXIS_RST_CTL_RESET_EN);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
fsl_lsch3_early_init_f();
|
|
return 0;
|
|
}
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
if (hwconfig("sdhc"))
|
|
config_board_mux(MUX_TYPE_SDHC);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void detail_board_ddr_info(void)
|
|
{
|
|
puts("\nDDR ");
|
|
print_size(gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size, "");
|
|
print_ddr_info(0);
|
|
#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
|
|
if (gd->bd->bi_dram[2].size) {
|
|
puts("\nDP-DDR ");
|
|
print_size(gd->bd->bi_dram[2].size, "");
|
|
print_ddr_info(CONFIG_DP_DDR_CTRL);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
int dram_init(void)
|
|
{
|
|
gd->ram_size = initdram(0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_ARCH_MISC_INIT)
|
|
int arch_misc_init(void)
|
|
{
|
|
#ifdef CONFIG_FSL_DEBUG_SERVER
|
|
debug_server_init();
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_FSL_MC_ENET
|
|
void fdt_fixup_board_enet(void *fdt)
|
|
{
|
|
int offset;
|
|
|
|
offset = fdt_path_offset(fdt, "/fsl-mc");
|
|
|
|
if (offset < 0)
|
|
offset = fdt_path_offset(fdt, "/fsl,dprc@0");
|
|
|
|
if (offset < 0) {
|
|
printf("%s: ERROR: fsl-mc node not found in device tree (error %d)\n",
|
|
__func__, offset);
|
|
return;
|
|
}
|
|
|
|
if (get_mc_boot_status() == 0)
|
|
fdt_status_okay(fdt, offset);
|
|
else
|
|
fdt_status_fail(fdt, offset);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_OF_BOARD_SETUP
|
|
int ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
int err;
|
|
u64 base[CONFIG_NR_DRAM_BANKS];
|
|
u64 size[CONFIG_NR_DRAM_BANKS];
|
|
|
|
ft_cpu_setup(blob, bd);
|
|
|
|
/* fixup DT for the two GPP DDR banks */
|
|
base[0] = gd->bd->bi_dram[0].start;
|
|
size[0] = gd->bd->bi_dram[0].size;
|
|
base[1] = gd->bd->bi_dram[1].start;
|
|
size[1] = gd->bd->bi_dram[1].size;
|
|
|
|
fdt_fixup_memory_banks(blob, base, size, 2);
|
|
|
|
#ifdef CONFIG_FSL_MC_ENET
|
|
fdt_fixup_board_enet(blob);
|
|
err = fsl_mc_ldpaa_exit(bd);
|
|
if (err)
|
|
return err;
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
void qixis_dump_switch(void)
|
|
{
|
|
int i, nr_of_cfgsw;
|
|
|
|
QIXIS_WRITE(cms[0], 0x00);
|
|
nr_of_cfgsw = QIXIS_READ(cms[1]);
|
|
|
|
puts("DIP switch settings dump:\n");
|
|
for (i = 1; i <= nr_of_cfgsw; i++) {
|
|
QIXIS_WRITE(cms[0], i);
|
|
printf("SW%d = (0x%02x)\n", i, QIXIS_READ(cms[1]));
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Board rev C and earlier has duplicated I2C addresses for 2nd controller.
|
|
* Both slots has 0x54, resulting 2nd slot unusable.
|
|
*/
|
|
void update_spd_address(unsigned int ctrl_num,
|
|
unsigned int slot,
|
|
unsigned int *addr)
|
|
{
|
|
u8 sw;
|
|
|
|
sw = QIXIS_READ(arch);
|
|
if ((sw & 0xf) < 0x3) {
|
|
if (ctrl_num == 1 && slot == 0)
|
|
*addr = SPD_EEPROM_ADDRESS4;
|
|
else if (ctrl_num == 1 && slot == 1)
|
|
*addr = SPD_EEPROM_ADDRESS3;
|
|
}
|
|
}
|