mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-07-30 23:03:45 +09:00
09a54c009e
This patch enables the DM support for the SPI driver and the SPI NOR flash chips. Some MVEBU boards boot from SPI NOR, so adding the aliases and enabling CONFIG_DM_SEQ_ALIAS is needed here. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <dirk.eibach@gdsys.cc> Cc: Simon Glass <sjg@chromium.org>
421 lines
9.7 KiB
Plaintext
421 lines
9.7 KiB
Plaintext
/*
|
|
* Device Tree file for Marvell Armada 385 development board
|
|
* (RD-88F6820-GP)
|
|
*
|
|
* Copyright (C) 2014 Marvell
|
|
*
|
|
* Gregory CLEMENT <gregory.clement@free-electrons.com>
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without
|
|
* any warranty of any kind, whether express or implied.
|
|
*
|
|
* Or, alternatively,
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "armada-388.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/ {
|
|
model = "Marvell Armada 385 GP";
|
|
compatible = "marvell,a385-gp", "marvell,armada388", "marvell,armada380";
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
aliases {
|
|
spi0 = &spi0;
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x80000000>; /* 2 GB */
|
|
};
|
|
|
|
soc {
|
|
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
|
|
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
|
|
|
|
internal-regs {
|
|
spi@10600 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi0_pins>;
|
|
status = "okay";
|
|
u-boot,dm-pre-reloc;
|
|
|
|
spi-flash@0 {
|
|
u-boot,dm-pre-reloc;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "st,m25p128", "jedec,spi-nor";
|
|
reg = <0>; /* Chip select 0 */
|
|
spi-max-frequency = <50000000>;
|
|
m25p,fast-read;
|
|
};
|
|
};
|
|
|
|
i2c@11000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_pins>;
|
|
status = "okay";
|
|
clock-frequency = <100000>;
|
|
/*
|
|
* The EEPROM located at adresse 54 is needed
|
|
* for the boot - DO NOT ERASE IT -
|
|
*/
|
|
|
|
expander0: pca9555@20 {
|
|
compatible = "nxp,pca9555";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pca0_pins>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x20>;
|
|
};
|
|
|
|
expander1: pca9555@21 {
|
|
compatible = "nxp,pca9555";
|
|
pinctrl-names = "default";
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x21>;
|
|
};
|
|
|
|
};
|
|
|
|
serial@12000 {
|
|
/*
|
|
* Exported on the micro USB connector CON16
|
|
* through an FTDI
|
|
*/
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_pins>;
|
|
status = "okay";
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
/* GE1 CON15 */
|
|
ethernet@30000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ge1_rgmii_pins>;
|
|
status = "okay";
|
|
phy = <&phy1>;
|
|
phy-mode = "rgmii-id";
|
|
};
|
|
|
|
/* CON4 */
|
|
usb@58000 {
|
|
vcc-supply = <®_usb2_0_vbus>;
|
|
status = "okay";
|
|
};
|
|
|
|
/* GE0 CON1 */
|
|
ethernet@70000 {
|
|
pinctrl-names = "default";
|
|
/*
|
|
* The Reference Clock 0 is used to provide a
|
|
* clock to the PHY
|
|
*/
|
|
pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>;
|
|
status = "okay";
|
|
phy = <&phy0>;
|
|
phy-mode = "rgmii-id";
|
|
};
|
|
|
|
|
|
mdio@72004 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mdio_pins>;
|
|
|
|
phy0: ethernet-phy@1 {
|
|
reg = <1>;
|
|
};
|
|
|
|
phy1: ethernet-phy@0 {
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
sata@a8000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sata0_pins>, <&sata1_pins>;
|
|
status = "okay";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
sata0: sata-port@0 {
|
|
reg = <0>;
|
|
target-supply = <®_5v_sata0>;
|
|
};
|
|
|
|
sata1: sata-port@1 {
|
|
reg = <1>;
|
|
target-supply = <®_5v_sata1>;
|
|
};
|
|
};
|
|
|
|
sata@e0000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sata2_pins>, <&sata3_pins>;
|
|
status = "okay";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
sata2: sata-port@0 {
|
|
reg = <0>;
|
|
target-supply = <®_5v_sata2>;
|
|
};
|
|
|
|
sata3: sata-port@1 {
|
|
reg = <1>;
|
|
target-supply = <®_5v_sata3>;
|
|
};
|
|
};
|
|
|
|
sdhci@d8000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdhci_pins>;
|
|
cd-gpios = <&expander0 5 GPIO_ACTIVE_LOW>;
|
|
no-1-8-v;
|
|
wp-inverted;
|
|
bus-width = <8>;
|
|
status = "okay";
|
|
};
|
|
|
|
/* CON5 */
|
|
usb3@f0000 {
|
|
vcc-supply = <®_usb2_1_vbus>;
|
|
status = "okay";
|
|
};
|
|
|
|
/* CON7 */
|
|
usb3@f8000 {
|
|
vcc-supply = <®_usb3_vbus>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
pcie-controller {
|
|
status = "okay";
|
|
/*
|
|
* One PCIe units is accessible through
|
|
* standard PCIe slot on the board.
|
|
*/
|
|
pcie@1,0 {
|
|
/* Port 0, Lane 0 */
|
|
status = "okay";
|
|
};
|
|
|
|
/*
|
|
* The two other PCIe units are accessible
|
|
* through mini PCIe slot on the board.
|
|
*/
|
|
pcie@2,0 {
|
|
/* Port 1, Lane 0 */
|
|
status = "okay";
|
|
};
|
|
pcie@3,0 {
|
|
/* Port 2, Lane 0 */
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
gpio-fan {
|
|
compatible = "gpio-fan";
|
|
gpios = <&expander1 3 GPIO_ACTIVE_HIGH>;
|
|
gpio-fan,speed-map = < 0 0
|
|
3000 1>;
|
|
};
|
|
};
|
|
|
|
reg_usb3_vbus: usb3-vbus {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "usb3-vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
gpio = <&expander1 15 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
reg_usb2_0_vbus: v5-vbus0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "v5.0-vbus0";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
gpio = <&expander1 14 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
reg_usb2_1_vbus: v5-vbus1 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "v5.0-vbus1";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
reg_usb2_1_vbus: v5-vbus1 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "v5.0-vbus1";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
reg_sata0: pwr-sata0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pwr_en_sata0";
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
reg_5v_sata0: v5-sata0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "v5.0-sata0";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
vin-supply = <®_sata0>;
|
|
};
|
|
|
|
reg_12v_sata0: v12-sata0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "v12.0-sata0";
|
|
regulator-min-microvolt = <12000000>;
|
|
regulator-max-microvolt = <12000000>;
|
|
regulator-always-on;
|
|
vin-supply = <®_sata0>;
|
|
};
|
|
|
|
reg_sata1: pwr-sata1 {
|
|
regulator-name = "pwr_en_sata1";
|
|
compatible = "regulator-fixed";
|
|
regulator-min-microvolt = <12000000>;
|
|
regulator-max-microvolt = <12000000>;
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
gpio = <&expander0 3 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
reg_5v_sata1: v5-sata1 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "v5.0-sata1";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
vin-supply = <®_sata1>;
|
|
};
|
|
|
|
reg_12v_sata1: v12-sata1 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "v12.0-sata1";
|
|
regulator-min-microvolt = <12000000>;
|
|
regulator-max-microvolt = <12000000>;
|
|
regulator-always-on;
|
|
vin-supply = <®_sata1>;
|
|
};
|
|
|
|
reg_sata2: pwr-sata2 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pwr_en_sata2";
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
gpio = <&expander0 11 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
reg_5v_sata2: v5-sata2 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "v5.0-sata2";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
vin-supply = <®_sata2>;
|
|
};
|
|
|
|
reg_12v_sata2: v12-sata2 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "v12.0-sata2";
|
|
regulator-min-microvolt = <12000000>;
|
|
regulator-max-microvolt = <12000000>;
|
|
regulator-always-on;
|
|
vin-supply = <®_sata2>;
|
|
};
|
|
|
|
reg_sata3: pwr-sata3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pwr_en_sata3";
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
reg_5v_sata3: v5-sata3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "v5.0-sata3";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
vin-supply = <®_sata3>;
|
|
};
|
|
|
|
reg_12v_sata3: v12-sata3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "v12.0-sata3";
|
|
regulator-min-microvolt = <12000000>;
|
|
regulator-max-microvolt = <12000000>;
|
|
regulator-always-on;
|
|
vin-supply = <®_sata3>;
|
|
};
|
|
};
|
|
|
|
&pinctrl {
|
|
pca0_pins: pca0_pins {
|
|
marvell,pins = "mpp18";
|
|
marvell,function = "gpio";
|
|
};
|
|
};
|