mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-22 01:48:52 +09:00
![Faiz Abbas](/assets/img/avatar_default.png)
The dra7xx series of SOCs contain a temperature sensor and an associated analog-to-digital converter (ADC) which produces an output which is proportional to the SOC temperature. Add support for this temperature sensor. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
36 lines
1.1 KiB
Plaintext
36 lines
1.1 KiB
Plaintext
* Texas Instrument dra7xx SCM bandgap bindings
|
|
|
|
In the System Control Module, SoC supplies a voltage reference
|
|
and a temperature sensor feature that are gathered in the band
|
|
gap voltage and temperature sensor (VBGAPTS) module. The band
|
|
gap provides current and voltage reference for its internal
|
|
circuits and other analog IP blocks. The analog-to-digital
|
|
converter (ADC) produces an output value that is proportional
|
|
to the silicon temperature.
|
|
|
|
Required properties:
|
|
- compatible : Should be:
|
|
- "ti,dra752-bandgap"
|
|
- interrupts : this entry should indicate which interrupt line
|
|
the talert signal is routed to;
|
|
- regs : this is specific to each bandgap version, because
|
|
the mapping may change from soc to soc, apart from depending
|
|
on available features.
|
|
|
|
Optional:
|
|
- gpios : this entry should be used to inform which GPIO
|
|
line the tshut signal is routed to. The informed GPIO will
|
|
be treated as an IRQ;
|
|
|
|
Example:
|
|
bandgap {
|
|
reg = <0x4a0021e0 0xc
|
|
0x4a00232c 0xc
|
|
0x4a002380 0x2c
|
|
0x4a0023C0 0x3c
|
|
0x4a002564 0x8
|
|
0x4a002574 0x50>;
|
|
compatible = "ti,dra752-bandgap";
|
|
interrupts = <0 126 4>; /* talert */
|
|
};
|