mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-22 01:48:52 +09:00
![Patrick Delaunay](/assets/img/avatar_default.png)
HSE and LSE bypass shall support both analog and digital signals. This patch add a way to select digital bypas case in the device tree and set the associated bit DIGBYP in RCC_BDCR and RCC_OCEN register during clock tree initialization. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
229 lines
5.4 KiB
Plaintext
229 lines
5.4 KiB
Plaintext
STMicroelectronics STM32MP1 clock tree initialization
|
|
=====================================================
|
|
|
|
The STM32MP clock tree initialization is based on device tree information
|
|
for RCC IP and on fixed clocks.
|
|
|
|
-------------------------------
|
|
RCC CLOCK = st,stm32mp1-rcc-clk
|
|
-------------------------------
|
|
|
|
The RCC IP is both a reset and a clock controller but this documentation only
|
|
describes the fields added for clock tree initialization which are not present
|
|
in Linux binding.
|
|
|
|
Please refer to ../mfd/st,stm32-rcc.txt for all the other properties common
|
|
with Linux.
|
|
|
|
Required properties:
|
|
|
|
- compatible: Should be "st,stm32mp1-rcc-clk"
|
|
|
|
- st,clksrc : The clock source in this order
|
|
|
|
for STM32MP15x: 9 clock sources are requested
|
|
MPU AXI MCU PLL12 PLL3 PLL4 RTC MCO1 MCO2
|
|
|
|
with value equals to RCC clock specifier as defined in
|
|
dt-bindings/clock/stm32mp1-clksrc.h: CLK_<NAME>_<SOURCE>
|
|
|
|
- st,clkdiv : The div parameters in this order
|
|
for STM32MP15x: 11 dividers value are requested
|
|
MPU AXI MCU APB1 APB2 APB3 APB4 APB5 RTC MCO1 MCO2
|
|
|
|
with DIV coding defined in RCC associated register RCC_xxxDIVR
|
|
|
|
most the case, it is:
|
|
0x0: not divided
|
|
0x1: division by 2
|
|
0x2: division by 4
|
|
0x3: division by 8
|
|
...
|
|
|
|
but for RTC MCO1 MCO2, the coding is different:
|
|
0x0: not divided
|
|
0x1: division by 2
|
|
0x2: division by 3
|
|
0x3: division by 4
|
|
...
|
|
|
|
Optional Properties:
|
|
- st,pll
|
|
PLL children node for PLL1 to PLL4 : (see ref manual for details)
|
|
with associated index 0 to 3 (st,pll@0 to st,pll@4)
|
|
PLLx is off when the associated node is absent
|
|
|
|
- Sub-nodes:
|
|
|
|
- cfg: The parameters for PLL configuration in this order:
|
|
DIVM DIVN DIVP DIVQ DIVR Output
|
|
|
|
with DIV value as defined in RCC spec:
|
|
0x0: bypass (division by 1)
|
|
0x1: division by 2
|
|
0x2: division by 3
|
|
0x3: division by 4
|
|
...
|
|
|
|
and Output = bitfield for each output value = 1:ON/0:OFF
|
|
BIT(0) => output P : DIVPEN
|
|
BIT(1) => output Q : DIVQEN
|
|
BIT(2) => output R : DIVREN
|
|
NB : macro PQR(p,q,r) can be used to build this value
|
|
with p,p,r = 0 or 1
|
|
|
|
- frac : Fractional part of the multiplication factor
|
|
(optional, PLL is in integer mode when absent)
|
|
|
|
- csg : Clock Spreading Generator (optional)
|
|
with parameters in this order:
|
|
MOD_PER INC_STEP SSCG_MODE
|
|
|
|
* MOD_PER: Modulation Period Adjustment
|
|
* INC_STEP: Modulation Depth Adjustment
|
|
* SSCG_MODE: Spread spectrum clock generator mode
|
|
you can use associated defines from stm32mp1-clksrc.h
|
|
* SSCG_MODE_CENTER_SPREAD = 0
|
|
* SSCG_MODE_DOWN_SPREAD = 1
|
|
|
|
|
|
- st,pkcs : used to configure the peripherals kernel clock selection
|
|
containing a list of peripheral kernel clock source identifier as defined
|
|
in the file dt-bindings/clock/stm32mp1-clksrc.h
|
|
|
|
Example:
|
|
|
|
rcc: rcc@50000000 {
|
|
compatible = "syscon", "simple-mfd";
|
|
|
|
reg = <0x50000000 0x1000>;
|
|
|
|
rcc_clk: rcc-clk@50000000 {
|
|
#clock-cells = <1>;
|
|
compatible = "st,stm32mp1-rcc-clk";
|
|
|
|
st,clksrc = < CLK_MPU_PLL1P
|
|
CLK_AXI_PLL2P
|
|
CLK_MCU_HSI
|
|
CLK_PLL12_HSE
|
|
CLK_PLL3_HSE
|
|
CLK_PLL4_HSE
|
|
CLK_RTC_HSE
|
|
CLK_MCO1_DISABLED
|
|
CLK_MCO2_DISABLED
|
|
>;
|
|
|
|
st,clkdiv = <
|
|
1 /*MPU*/
|
|
0 /*AXI*/
|
|
0 /*MCU*/
|
|
1 /*APB1*/
|
|
1 /*APB2*/
|
|
1 /*APB3*/
|
|
1 /*APB4*/
|
|
5 /*APB5*/
|
|
23 /*RTC*/
|
|
0 /*MCO1*/
|
|
0 /*MCO2*/
|
|
>;
|
|
|
|
st,pll@0 {
|
|
cfg = < 1 53 0 0 0 1 >;
|
|
frac = < 0x810 >;
|
|
};
|
|
st,pll@1 {
|
|
cfg = < 1 43 1 0 0 PQR(0,1,1)>;
|
|
csg = <10 20 1>;
|
|
};
|
|
st,pll@2 {
|
|
cfg = < 2 85 3 13 3 0>;
|
|
csg = <10 20 SSCG_MODE_CENTER_SPREAD>;
|
|
};
|
|
st,pll@3 {
|
|
cfg = < 2 78 4 7 9 3>;
|
|
};
|
|
st,pkcs = <
|
|
CLK_STGEN_HSE
|
|
CLK_CKPER_HSI
|
|
CLK_USBPHY_PLL2P
|
|
CLK_DSI_PLL2Q
|
|
>;
|
|
};
|
|
};
|
|
|
|
--------------------------
|
|
other clocks = fixed-clock
|
|
--------------------------
|
|
The clock tree is also based on 5 fixed-clock in clocks node
|
|
used to define the state of associated ST32MP1 oscillators:
|
|
- clk-lsi
|
|
- clk-lse
|
|
- clk-hsi
|
|
- clk-hse
|
|
- clk-csi
|
|
|
|
At boot the clock tree initialization will
|
|
- enable the oscillator present in device tree
|
|
- disable HSI oscillator if the node is absent (always activated by bootrom)
|
|
|
|
Optional properties :
|
|
|
|
a) for external oscillator: "clk-lse", "clk-hse"
|
|
|
|
4 optional fields are managed
|
|
- "st,bypass" Configure the oscillator bypass mode (HSEBYP, LSEBYP)
|
|
- "st,digbypass" Configure the bypass mode as full-swing digital signal
|
|
(DIGBYP)
|
|
- "st,css" Activate the clock security system (HSECSSON, LSECSSON)
|
|
- "st,drive" (only for LSE) value of the drive for the oscillator
|
|
(see LSEDRV_ define in the file dt-bindings/clock/stm32mp1-clksrc.h)
|
|
|
|
Example board file:
|
|
|
|
/ {
|
|
clocks {
|
|
clk_hse: clk-hse {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <64000000>;
|
|
st,bypass;
|
|
};
|
|
|
|
clk_lse: clk-lse {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <32768>;
|
|
st,css;
|
|
st,drive = <LSEDRV_LOWEST>;
|
|
};
|
|
};
|
|
|
|
b) for internal oscillator: "clk-hsi"
|
|
|
|
internally HSI clock is fixed to 64MHz for STM32MP157 soc
|
|
in device tree clk-hsi is the clock after HSIDIV (ck_hsi in RCC doc)
|
|
So this clock frequency is used to compute the expected HSI_DIV
|
|
for the clock tree initialisation
|
|
|
|
ex: for HSIDIV = /1
|
|
|
|
/ {
|
|
clocks {
|
|
clk_hsi: clk-hsi {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <64000000>;
|
|
};
|
|
};
|
|
|
|
ex: for HSIDIV = /2
|
|
|
|
/ {
|
|
clocks {
|
|
clk_hsi: clk-hsi {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <32000000>;
|
|
};
|
|
};
|