mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-22 01:48:52 +09:00
![Simon Glass](/assets/img/avatar_default.png)
Bring in required device tree files from Linux. Since mainline Linux is somewhat behind, use the files from the Chromium tree. We can re-sync once further code is acccepted upstream. Signed-off-by: Simon Glass <sjg@chromium.org>
156 lines
5.4 KiB
Plaintext
156 lines
5.4 KiB
Plaintext
Rockchip Dynamic Memory Controller Driver
|
|
Required properties:
|
|
- compatible: "rockchip,rk3288-dmc", "syscon"
|
|
- rockchip,cru: this driver should access cru regs, so need get cru here
|
|
- rockchip,grf: this driver should access grf regs, so need get grf here
|
|
- rockchip,pmu: this driver should access pmu regs, so need get pmu here
|
|
- rockchip,sgrf: this driver should access sgrf regs, so need get sgrf here
|
|
- rockchip,noc: this driver should access noc regs, so need get noc here
|
|
- reg: dynamic ram protocol controller(PCTL) address and phy controller(PHYCTL) address
|
|
- clock: must include clock specifiers corresponding to entries in the clock-names property.
|
|
- clock-output-names: from common clock binding to override the default output clock name
|
|
Must contain
|
|
pclk_ddrupctl0: support clock for access protocol controller registers of channel 0
|
|
pclk_publ0: support clock for access phy controller registers of channel 0
|
|
pclk_ddrupctl1: support clock for access protocol controller registers of channel 1
|
|
pclk_publ1: support clock for access phy controller registers of channel 1
|
|
arm_clk: for get arm frequency
|
|
-logic-supply: this driver should adjust VDD_LOGIC according to dmc frequency, so need get logic-supply here
|
|
-timings:
|
|
Must contain
|
|
rockchip,odt-disable-freq: if ddr clock frequency low than odt-disable-freq,this driver should disable DDR ODT
|
|
rockchip,dll-disable-freq: if ddr clock frequency low than dll-disable-freq,this driver should disable DDR DLL
|
|
rockchip,sr-enable-freq: if ddr clock frequency high than sr-enable-freq,this driver should enable the automatic self refresh function
|
|
rockchip,pd-enable-freq: if ddr clock frequency high than pd-enable-freq,this driver should enable the automatic power down function
|
|
rockchip,auto-self-refresh-cnt: Self Refresh idle period. Memories are placed into Self-Refresh mode if the NIF is idle in Access state for auto-self-refresh-cnt * 32 * n_clk cycles.The automatic self refresh function is disabled when auto-self-refresh-cnt=0.
|
|
rockchip,auto-power-down-cnt: Power-down idle period. Memories are placed into power-down mode if the NIF is idle for auto-power-down-cnt n_clk cycles.The automatic power down function is disabled when auto-power-down-cnt=0.
|
|
rockchip,ddr-speed-bin: DDR3 type,AC timing parameters from the memory data-sheet
|
|
0.DDR3_800D (5-5-5)
|
|
1.DDR3_800E (6-6-6)
|
|
2.DDR3_1066E (6-6-6)
|
|
3.DDR3_1066F (7-7-7)
|
|
4.DDR3_1066G (8-8-8)
|
|
5.DDR3_1333F (7-7-7)
|
|
6.DDR3_1333G (8-8-8)
|
|
7.DDR3_1333H (9-9-9)
|
|
8.DDR3_1333J (10-10-10)
|
|
9.DDR3_1600G (8-8-8)
|
|
10.DDR3_1600H (9-9-9)
|
|
11.DDR3_1600J (10-10-10)
|
|
12.DDR3_1600K (11-11-11)
|
|
13.DDR3_1866J (10-10-10)
|
|
14.DDR3_1866K (11-11-11)
|
|
15.DDR3_1866L (12-12-12)
|
|
16.DDR3_1866M (13-13-13)
|
|
17.DDR3_2133K (11-11-11)
|
|
18.DDR3_2133L (12-12-12)
|
|
19.DDR3_2133M (13-13-13)
|
|
20.DDR3_2133N (14-14-14)
|
|
21.DDR3_DEFAULT
|
|
rockchip,trcd: tRCD,AC timing parameters from the memory data-sheet
|
|
rockchip,trp: tRP,AC timing parameters from the memory data-sheet
|
|
-rockchip,num-channels: number of SDRAM channels (1 or 2)
|
|
-rockchip,pctl-timing: parameters for the SDRAM setup, in this order:
|
|
togcnt1u
|
|
tinit
|
|
trsth
|
|
togcnt100n
|
|
trefi
|
|
tmrd
|
|
trfc
|
|
trp
|
|
trtw
|
|
tal
|
|
tcl
|
|
tcwl
|
|
tras
|
|
trc
|
|
trcd
|
|
trrd
|
|
trtp
|
|
twr
|
|
twtr
|
|
texsr
|
|
txp
|
|
txpdll
|
|
tzqcs
|
|
tzqcsi
|
|
tdqs
|
|
tcksre
|
|
tcksrx
|
|
tcke
|
|
tmod
|
|
trstl
|
|
tzqcl
|
|
tmrr
|
|
tckesr
|
|
tdpd
|
|
-rockchip,phy-timing: PHY timing information in this order:
|
|
dtpr0
|
|
dtpr1
|
|
dtpr2
|
|
mr0..mr3
|
|
-rockchip,sdram-channel: SDRAM channel information, each 8 bits. Both channels
|
|
will be set up the same. The parameters are in this order:
|
|
rank
|
|
col
|
|
bk
|
|
bw
|
|
dbw
|
|
row_3_4
|
|
cs0_row
|
|
cs1_row
|
|
- rockchip,sdram-params: SDRAM base parameters, in this order:
|
|
NOC timing - value for ddrtiming register
|
|
NOC activate - value for activate register
|
|
ddrconf - value for ddrconf register
|
|
DDR frequency in MHz
|
|
DRAM type (3=DDR3, 6=LPDDR3)
|
|
stride - stride value for soc_con2 register
|
|
odt - 1 to enable DDR ODT, 0 to disable
|
|
|
|
Example:
|
|
dmc: dmc@ff610000 {
|
|
compatible = "rockchip,rk3288-dmc", "syscon";
|
|
rockchip,cru = <&cru>;
|
|
rockchip,grf = <&grf>;
|
|
rockchip,pmu = <&pmu>;
|
|
rockchip,sgrf = <&sgrf>;
|
|
rockchip,noc = <&noc>;
|
|
reg = <0xff610000 0x3fc
|
|
0xff620000 0x294
|
|
0xff630000 0x3fc
|
|
0xff640000 0x294>;
|
|
clocks = <&cru PCLK_DDRUPCTL0>, <&cru PCLK_PUBL0>,
|
|
<&cru PCLK_DDRUPCTL1>, <&cru PCLK_PUBL1>,
|
|
<&cru ARMCLK>;
|
|
clock-names = "pclk_ddrupctl0", "pclk_publ0",
|
|
"pclk_ddrupctl1", "pclk_publ1",
|
|
"arm_clk";
|
|
};
|
|
|
|
&dmc {
|
|
logic-supply = <&vdd_logic>;
|
|
timings {
|
|
rockchip,odt-disable-freq = <333000000>;
|
|
rockchip,dll-disable-freq = <333000000>;
|
|
rockchip,sr-enable-freq = <333000000>;
|
|
rockchip,pd-enable-freq = <666000000>;
|
|
rockchip,auto-self-refresh-cnt = <0>;
|
|
rockchip,auto-power-down-cnt = <64>;
|
|
rockchip,ddr-speed-bin = <21>;
|
|
rockchip,trcd = <10>;
|
|
rockchip,trp = <10>;
|
|
};
|
|
rockchip,num-channels = <2>;
|
|
rockchip,pctl-timing = <0x29a 0x1f4 0xc8 0x42 0x4e 0x4 0xea 0xa
|
|
0x5 0x0 0xa 0x7 0x19 0x24 0xa 0x7
|
|
0x5 0xa 0x5 0x200 0x5 0x10 0x40 0x0
|
|
0x1 0x7 0x7 0x4 0xc 0x43 0x100 0x0
|
|
0x5 0x0>;
|
|
rockchip,phy-timing = <0x48f9aab4 0xea0910 0x1002c200
|
|
0xa60 0x40 0x10 0x0>;
|
|
rockchip,sdram-channel = /bits/ 8 <0x1 0xa 0x3 0x2 0x1 0x0 0xf 0xf>;
|
|
rockchip,sdram-params = <0x30B25564 0x627 3 666000000 3 9 1>;
|
|
};
|