u-boot-brain/drivers/mmc/mmc_private.h
Jean-Jacques Hiblot 863d10044a mmc: add mmc_poll_for_busy() and change the purpose of mmc_send_status()
mmc_send_status() is currently used to poll the card until it is ready, not
actually returning the status of the card.
Make it return the status and add another function to poll the card.

Also remove the 'extern' declaration in the mmc-private.h header to comply
with the coding standard.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-07-15 10:16:49 +08:00

139 lines
3.3 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2008,2010 Freescale Semiconductor, Inc
* Andy Fleming
*
* Based (loosely) on the Linux code
*/
#ifndef _MMC_PRIVATE_H_
#define _MMC_PRIVATE_H_
#include <mmc.h>
int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data);
int mmc_send_status(struct mmc *mmc, unsigned int *status);
int mmc_poll_for_busy(struct mmc *mmc, int timeout);
int mmc_set_blocklen(struct mmc *mmc, int len);
#ifdef CONFIG_FSL_ESDHC_ADAPTER_IDENT
void mmc_adapter_card_type_ident(void);
#endif
#if CONFIG_IS_ENABLED(BLK)
ulong mmc_bread(struct udevice *dev, lbaint_t start, lbaint_t blkcnt,
void *dst);
#else
ulong mmc_bread(struct blk_desc *block_dev, lbaint_t start, lbaint_t blkcnt,
void *dst);
#endif
#if CONFIG_IS_ENABLED(MMC_WRITE)
#if CONFIG_IS_ENABLED(BLK)
ulong mmc_bwrite(struct udevice *dev, lbaint_t start, lbaint_t blkcnt,
const void *src);
ulong mmc_berase(struct udevice *dev, lbaint_t start, lbaint_t blkcnt);
#else
ulong mmc_bwrite(struct blk_desc *block_dev, lbaint_t start, lbaint_t blkcnt,
const void *src);
ulong mmc_berase(struct blk_desc *block_dev, lbaint_t start, lbaint_t blkcnt);
#endif
#else /* CONFIG_SPL_MMC_WRITE is not defined */
/* declare dummies to reduce code size. */
#if CONFIG_IS_ENABLED(BLK)
static inline unsigned long mmc_berase(struct udevice *dev,
lbaint_t start, lbaint_t blkcnt)
{
return 0;
}
static inline ulong mmc_bwrite(struct udevice *dev, lbaint_t start,
lbaint_t blkcnt, const void *src)
{
return 0;
}
#else
static inline unsigned long mmc_berase(struct blk_desc *block_dev,
lbaint_t start, lbaint_t blkcnt)
{
return 0;
}
static inline ulong mmc_bwrite(struct blk_desc *block_dev, lbaint_t start,
lbaint_t blkcnt, const void *src)
{
return 0;
}
#endif
#endif /* CONFIG_SPL_BUILD */
#ifdef CONFIG_MMC_TRACE
void mmmc_trace_before_send(struct mmc *mmc, struct mmc_cmd *cmd);
void mmmc_trace_after_send(struct mmc *mmc, struct mmc_cmd *cmd, int ret);
void mmc_trace_state(struct mmc *mmc, struct mmc_cmd *cmd);
#else
static inline void mmmc_trace_before_send(struct mmc *mmc, struct mmc_cmd *cmd)
{
}
static inline void mmmc_trace_after_send(struct mmc *mmc, struct mmc_cmd *cmd,
int ret)
{
}
static inline void mmc_trace_state(struct mmc *mmc, struct mmc_cmd *cmd)
{
}
#endif
/**
* mmc_get_next_devnum() - Get the next available MMC device number
*
* @return next available device number (0 = first), or -ve on error
*/
int mmc_get_next_devnum(void);
/**
* mmc_do_preinit() - Get an MMC device ready for use
*/
void mmc_do_preinit(void);
/**
* mmc_list_init() - Set up the list of MMC devices
*/
void mmc_list_init(void);
/**
* mmc_list_add() - Add a new MMC device to the list of devices
*
* @mmc: Device to add
*/
void mmc_list_add(struct mmc *mmc);
/**
* mmc_switch_part() - Switch to a new MMC hardware partition
*
* @mmc: MMC device
* @part_num: Hardware partition number
* @return 0 if OK, -ve on error
*/
int mmc_switch_part(struct mmc *mmc, unsigned int part_num);
/**
* mmc_switch() - Issue and MMC switch mode command
*
* @mmc: MMC device
* @set: Unused
* @index: Cmdarg index
* @value: Cmdarg value
* @return 0 if OK, -ve on error
*/
int mmc_switch(struct mmc *mmc, u8 set, u8 index, u8 value);
#endif /* _MMC_PRIVATE_H_ */