u-boot-brain/board/renesas/sh7753evb/sh7753evb.c
Joe Hershberger fb8977c5be net: Always build the string_to_enetaddr() helper
Part of the env cleanup moved this out of the environment code and into
the net code. However, this helper is sometimes needed even when the net
stack isn't included.

Move the helper to lib/net_utils.c like it's similarly-purposed
string_to_ip(). Also rename the moved function to similar naming.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reported-by: Ondrej Jirman <megous@megous.com>
2019-12-09 09:47:41 -06:00

326 lines
8.0 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2012 Renesas Solutions Corp.
*/
#include <common.h>
#include <env.h>
#include <init.h>
#include <malloc.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <asm/mmc.h>
#include <spi.h>
#include <spi_flash.h>
int checkboard(void)
{
puts("BOARD: SH7753 EVB\n");
return 0;
}
static void init_gpio(void)
{
struct gpio_regs *gpio = GPIO_BASE;
struct sermux_regs *sermux = SERMUX_BASE;
/* GPIO */
writew(0x0000, &gpio->pacr); /* GETHER */
writew(0x0001, &gpio->pbcr); /* INTC */
writew(0x0000, &gpio->pccr); /* PWMU, INTC */
writew(0x0000, &gpio->pdcr); /* SPI0 */
writew(0xeaff, &gpio->pecr); /* GPIO */
writew(0x0000, &gpio->pfcr); /* WDT */
writew(0x0004, &gpio->pgcr); /* SPI0, GETHER MDIO gate(PTG1) */
writew(0x0000, &gpio->phcr); /* SPI1 */
writew(0x0000, &gpio->picr); /* SDHI */
writew(0x0000, &gpio->pjcr); /* SCIF4 */
writew(0x0003, &gpio->pkcr); /* SerMux */
writew(0x0000, &gpio->plcr); /* SerMux */
writew(0x0000, &gpio->pmcr); /* RIIC */
writew(0x0000, &gpio->pncr); /* USB, SGPIO */
writew(0x0000, &gpio->pocr); /* SGPIO */
writew(0xd555, &gpio->pqcr); /* GPIO */
writew(0x0000, &gpio->prcr); /* RIIC */
writew(0x0000, &gpio->pscr); /* RIIC */
writew(0x0000, &gpio->ptcr); /* STATUS */
writeb(0x00, &gpio->pudr);
writew(0x5555, &gpio->pucr); /* Debug LED */
writew(0x0000, &gpio->pvcr); /* RSPI */
writew(0x0000, &gpio->pwcr); /* EVC */
writew(0x0000, &gpio->pxcr); /* LBSC */
writew(0x0000, &gpio->pycr); /* LBSC */
writew(0x0000, &gpio->pzcr); /* eMMC */
writew(0xfe00, &gpio->psel0);
writew(0x0000, &gpio->psel1);
writew(0x3000, &gpio->psel2);
writew(0xff00, &gpio->psel3);
writew(0x771f, &gpio->psel4);
writew(0x0ffc, &gpio->psel5);
writew(0x00ff, &gpio->psel6);
writew(0xfc00, &gpio->psel7);
writeb(0x10, &sermux->smr0); /* SMR0: SerMux mode 0 */
}
static void init_usb_phy(void)
{
struct usb_common_regs *common0 = USB0_COMMON_BASE;
struct usb_common_regs *common1 = USB1_COMMON_BASE;
struct usb0_phy_regs *phy = USB0_PHY_BASE;
struct usb1_port_regs *port = USB1_PORT_BASE;
struct usb1_alignment_regs *align = USB1_ALIGNMENT_BASE;
writew(0x0100, &phy->reset); /* set reset */
/* port0 = USB0, port1 = USB1 */
writew(0x0002, &phy->portsel);
writel(0x0001, &port->port1sel); /* port1 = Host */
writew(0x0111, &phy->reset); /* clear reset */
writew(0x4000, &common0->suspmode);
writew(0x4000, &common1->suspmode);
#if defined(__LITTLE_ENDIAN)
writel(0x00000000, &align->ehcidatac);
writel(0x00000000, &align->ohcidatac);
#endif
}
static void init_gether_mdio(void)
{
struct gpio_regs *gpio = GPIO_BASE;
writew(readw(&gpio->pgcr) | 0x0004, &gpio->pgcr);
writeb(readb(&gpio->pgdr) | 0x02, &gpio->pgdr); /* Use ET0-MDIO */
}
static void set_mac_to_sh_giga_eth_register(int channel, char *mac_string)
{
struct ether_mac_regs *ether;
unsigned char mac[6];
unsigned long val;
string_to_enetaddr(mac_string, mac);
if (!channel)
ether = GETHER0_MAC_BASE;
else
ether = GETHER1_MAC_BASE;
val = (mac[0] << 24) | (mac[1] << 16) | (mac[2] << 8) | mac[3];
writel(val, &ether->mahr);
val = (mac[4] << 8) | mac[5];
writel(val, &ether->malr);
}
#if defined(CONFIG_SH_32BIT)
/*****************************************************************
* This PMB must be set on this timing. The lowlevel_init is run on
* Area 0(phys 0x00000000), so we have to map it.
*
* The new PMB table is following:
* ent virt phys v sz c wt
* 0 0xa0000000 0x40000000 1 128M 0 1
* 1 0xa8000000 0x48000000 1 128M 0 1
* 2 0xb0000000 0x50000000 1 128M 0 1
* 3 0xb8000000 0x58000000 1 128M 0 1
* 4 0x80000000 0x40000000 1 128M 1 1
* 5 0x88000000 0x48000000 1 128M 1 1
* 6 0x90000000 0x50000000 1 128M 1 1
* 7 0x98000000 0x58000000 1 128M 1 1
*/
static void set_pmb_on_board_init(void)
{
struct mmu_regs *mmu = MMU_BASE;
/* clear ITLB */
writel(0x00000004, &mmu->mmucr);
/* delete PMB for SPIBOOT */
writel(0, PMB_ADDR_BASE(0));
writel(0, PMB_DATA_BASE(0));
/* add PMB for SDRAM(0x40000000 - 0x47ffffff) */
/* ppn ub v s1 s0 c wt */
writel(mk_pmb_addr_val(0xa0), PMB_ADDR_BASE(0));
writel(mk_pmb_data_val(0x40, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(0));
writel(mk_pmb_addr_val(0xb0), PMB_ADDR_BASE(2));
writel(mk_pmb_data_val(0x50, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(2));
writel(mk_pmb_addr_val(0xb8), PMB_ADDR_BASE(3));
writel(mk_pmb_data_val(0x58, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(3));
writel(mk_pmb_addr_val(0x80), PMB_ADDR_BASE(4));
writel(mk_pmb_data_val(0x40, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(4));
writel(mk_pmb_addr_val(0x90), PMB_ADDR_BASE(6));
writel(mk_pmb_data_val(0x50, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(6));
writel(mk_pmb_addr_val(0x98), PMB_ADDR_BASE(7));
writel(mk_pmb_data_val(0x58, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(7));
}
#endif
int board_init(void)
{
struct gether_control_regs *gether = GETHER_CONTROL_BASE;
init_gpio();
#if defined(CONFIG_SH_32BIT)
set_pmb_on_board_init();
#endif
/* Sets TXnDLY to B'010 */
writel(0x00000202, &gether->gbecont);
init_usb_phy();
init_gether_mdio();
return 0;
}
int board_mmc_init(bd_t *bis)
{
struct gpio_regs *gpio = GPIO_BASE;
writew(readw(&gpio->pgcr) | 0x0040, &gpio->pgcr);
writeb(readb(&gpio->pgdr) & ~0x08, &gpio->pgdr); /* Reset */
udelay(1);
writeb(readb(&gpio->pgdr) | 0x08, &gpio->pgdr); /* Release reset */
udelay(200);
return mmcif_mmc_init();
}
static int get_sh_eth_mac_raw(unsigned char *buf, int size)
{
#ifdef CONFIG_DEPRECATED
struct spi_flash *spi;
int ret;
spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3);
if (spi == NULL) {
printf("%s: spi_flash probe failed.\n", __func__);
return 1;
}
ret = spi_flash_read(spi, SH7753EVB_ETHERNET_MAC_BASE, size, buf);
if (ret) {
printf("%s: spi_flash read failed.\n", __func__);
spi_flash_free(spi);
return 1;
}
spi_flash_free(spi);
#endif
return 0;
}
static int get_sh_eth_mac(int channel, char *mac_string, unsigned char *buf)
{
memcpy(mac_string, &buf[channel * (SH7753EVB_ETHERNET_MAC_SIZE + 1)],
SH7753EVB_ETHERNET_MAC_SIZE);
mac_string[SH7753EVB_ETHERNET_MAC_SIZE] = 0x00; /* terminate */
return 0;
}
static void init_ethernet_mac(void)
{
char mac_string[64];
char env_string[64];
int i;
unsigned char *buf;
buf = malloc(256);
if (!buf) {
printf("%s: malloc failed.\n", __func__);
return;
}
get_sh_eth_mac_raw(buf, 256);
/* Gigabit Ethernet */
for (i = 0; i < SH7753EVB_ETHERNET_NUM_CH; i++) {
get_sh_eth_mac(i, mac_string, buf);
if (i == 0)
env_set("ethaddr", mac_string);
else {
sprintf(env_string, "eth%daddr", i);
env_set(env_string, mac_string);
}
set_mac_to_sh_giga_eth_register(i, mac_string);
}
free(buf);
}
int board_late_init(void)
{
init_ethernet_mac();
return 0;
}
#ifdef CONFIG_DEPRECATED
int do_write_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int i, ret;
char mac_string[256];
struct spi_flash *spi;
unsigned char *buf;
if (argc != 3) {
buf = malloc(256);
if (!buf) {
printf("%s: malloc failed.\n", __func__);
return 1;
}
get_sh_eth_mac_raw(buf, 256);
/* print current MAC address */
for (i = 0; i < SH7753EVB_ETHERNET_NUM_CH; i++) {
get_sh_eth_mac(i, mac_string, buf);
printf("GETHERC ch%d = %s\n", i, mac_string);
}
free(buf);
return 0;
}
/* new setting */
memset(mac_string, 0xff, sizeof(mac_string));
sprintf(mac_string, "%s\t%s",
argv[1], argv[2]);
/* write MAC data to SPI rom */
spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3);
if (!spi) {
printf("%s: spi_flash probe failed.\n", __func__);
return 1;
}
ret = spi_flash_erase(spi, SH7753EVB_ETHERNET_MAC_BASE_SPI,
SH7753EVB_SPI_SECTOR_SIZE);
if (ret) {
printf("%s: spi_flash erase failed.\n", __func__);
return 1;
}
ret = spi_flash_write(spi, SH7753EVB_ETHERNET_MAC_BASE_SPI,
sizeof(mac_string), mac_string);
if (ret) {
printf("%s: spi_flash write failed.\n", __func__);
spi_flash_free(spi);
return 1;
}
spi_flash_free(spi);
puts("The writing of the MAC address to SPI ROM was completed.\n");
return 0;
}
U_BOOT_CMD(
write_mac, 3, 1, do_write_mac,
"write MAC address for GETHERC",
"[GETHERC ch0] [GETHERC ch1]\n"
);
#endif