mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-31 22:39:08 +09:00
![Timur Tabi](/assets/img/avatar_default.png)
The localbus controller node in the device tree is typically a root node, even though the controller is part of CCSR. If we were to put the lbc node under the SOC node, then the 'ranges' property in the lbc node would translate through the 'ranges' property of the parent SOC node, and we don't want that. Since the lbc is a separate node, it's possible for the 'reg' property to be wrong. This happened with the original version of p1022ds.dts, which used a 32-bit value in the 'reg' address, instead of a 36-bit address. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
781 lines
21 KiB
C
781 lines
21 KiB
C
/*
|
|
* Copyright 2007-2011 Freescale Semiconductor, Inc.
|
|
*
|
|
* (C) Copyright 2000
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <libfdt.h>
|
|
#include <fdt_support.h>
|
|
#include <asm/processor.h>
|
|
#include <linux/ctype.h>
|
|
#include <asm/io.h>
|
|
#include <asm/fsl_portals.h>
|
|
#ifdef CONFIG_FSL_ESDHC
|
|
#include <fsl_esdhc.h>
|
|
#endif
|
|
#include "../../../../drivers/qe/qe.h" /* For struct qe_firmware */
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
extern void ft_qe_setup(void *blob);
|
|
extern void ft_fixup_num_cores(void *blob);
|
|
extern void ft_srio_setup(void *blob);
|
|
|
|
#ifdef CONFIG_MP
|
|
#include "mp.h"
|
|
|
|
void ft_fixup_cpu(void *blob, u64 memory_limit)
|
|
{
|
|
int off;
|
|
ulong spin_tbl_addr = get_spin_phys_addr();
|
|
u32 bootpg = determine_mp_bootpg();
|
|
u32 id = get_my_id();
|
|
const char *enable_method;
|
|
|
|
off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
|
|
while (off != -FDT_ERR_NOTFOUND) {
|
|
u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
|
|
|
|
if (reg) {
|
|
u64 val = *reg * SIZE_BOOT_ENTRY + spin_tbl_addr;
|
|
val = cpu_to_fdt32(val);
|
|
if (*reg == id) {
|
|
fdt_setprop_string(blob, off, "status",
|
|
"okay");
|
|
} else {
|
|
fdt_setprop_string(blob, off, "status",
|
|
"disabled");
|
|
}
|
|
|
|
if (hold_cores_in_reset(0)) {
|
|
#ifdef CONFIG_FSL_CORENET
|
|
/* Cores held in reset, use BRR to release */
|
|
enable_method = "fsl,brr-holdoff";
|
|
#else
|
|
/* Cores held in reset, use EEBPCR to release */
|
|
enable_method = "fsl,eebpcr-holdoff";
|
|
#endif
|
|
} else {
|
|
/* Cores out of reset and in a spin-loop */
|
|
enable_method = "spin-table";
|
|
|
|
fdt_setprop(blob, off, "cpu-release-addr",
|
|
&val, sizeof(val));
|
|
}
|
|
|
|
fdt_setprop_string(blob, off, "enable-method",
|
|
enable_method);
|
|
} else {
|
|
printf ("cpu NULL\n");
|
|
}
|
|
off = fdt_node_offset_by_prop_value(blob, off,
|
|
"device_type", "cpu", 4);
|
|
}
|
|
|
|
/* Reserve the boot page so OSes dont use it */
|
|
if ((u64)bootpg < memory_limit) {
|
|
off = fdt_add_mem_rsv(blob, bootpg, (u64)4096);
|
|
if (off < 0)
|
|
printf("%s: %s\n", __FUNCTION__, fdt_strerror(off));
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_FSL_CPC
|
|
static inline void ft_fixup_l3cache(void *blob, int off)
|
|
{
|
|
u32 line_size, num_ways, size, num_sets;
|
|
cpc_corenet_t *cpc = (void *)CONFIG_SYS_FSL_CPC_ADDR;
|
|
u32 cfg0 = in_be32(&cpc->cpccfg0);
|
|
|
|
size = CPC_CFG0_SZ_K(cfg0) * 1024 * CONFIG_SYS_NUM_CPC;
|
|
num_ways = CPC_CFG0_NUM_WAYS(cfg0);
|
|
line_size = CPC_CFG0_LINE_SZ(cfg0);
|
|
num_sets = size / (line_size * num_ways);
|
|
|
|
fdt_setprop(blob, off, "cache-unified", NULL, 0);
|
|
fdt_setprop_cell(blob, off, "cache-block-size", line_size);
|
|
fdt_setprop_cell(blob, off, "cache-size", size);
|
|
fdt_setprop_cell(blob, off, "cache-sets", num_sets);
|
|
fdt_setprop_cell(blob, off, "cache-level", 3);
|
|
#ifdef CONFIG_SYS_CACHE_STASHING
|
|
fdt_setprop_cell(blob, off, "cache-stash-id", 1);
|
|
#endif
|
|
}
|
|
#else
|
|
#define ft_fixup_l3cache(x, y)
|
|
#endif
|
|
|
|
#if defined(CONFIG_L2_CACHE)
|
|
/* return size in kilobytes */
|
|
static inline u32 l2cache_size(void)
|
|
{
|
|
volatile ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
|
|
volatile u32 l2siz_field = (l2cache->l2ctl >> 28) & 0x3;
|
|
u32 ver = SVR_SOC_VER(get_svr());
|
|
|
|
switch (l2siz_field) {
|
|
case 0x0:
|
|
break;
|
|
case 0x1:
|
|
if (ver == SVR_8540 || ver == SVR_8560 ||
|
|
ver == SVR_8541 || ver == SVR_8541_E ||
|
|
ver == SVR_8555 || ver == SVR_8555_E)
|
|
return 128;
|
|
else
|
|
return 256;
|
|
break;
|
|
case 0x2:
|
|
if (ver == SVR_8540 || ver == SVR_8560 ||
|
|
ver == SVR_8541 || ver == SVR_8541_E ||
|
|
ver == SVR_8555 || ver == SVR_8555_E)
|
|
return 256;
|
|
else
|
|
return 512;
|
|
break;
|
|
case 0x3:
|
|
return 1024;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline void ft_fixup_l2cache(void *blob)
|
|
{
|
|
int len, off;
|
|
u32 *ph;
|
|
struct cpu_type *cpu = identify_cpu(SVR_SOC_VER(get_svr()));
|
|
|
|
const u32 line_size = 32;
|
|
const u32 num_ways = 8;
|
|
const u32 size = l2cache_size() * 1024;
|
|
const u32 num_sets = size / (line_size * num_ways);
|
|
|
|
off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
|
|
if (off < 0) {
|
|
debug("no cpu node fount\n");
|
|
return;
|
|
}
|
|
|
|
ph = (u32 *)fdt_getprop(blob, off, "next-level-cache", 0);
|
|
|
|
if (ph == NULL) {
|
|
debug("no next-level-cache property\n");
|
|
return ;
|
|
}
|
|
|
|
off = fdt_node_offset_by_phandle(blob, *ph);
|
|
if (off < 0) {
|
|
printf("%s: %s\n", __func__, fdt_strerror(off));
|
|
return ;
|
|
}
|
|
|
|
if (cpu) {
|
|
char buf[40];
|
|
|
|
if (isdigit(cpu->name[0])) {
|
|
/* MPCxxxx, where xxxx == 4-digit number */
|
|
len = sprintf(buf, "fsl,mpc%s-l2-cache-controller",
|
|
cpu->name) + 1;
|
|
} else {
|
|
/* Pxxxx or Txxxx, where xxxx == 4-digit number */
|
|
len = sprintf(buf, "fsl,%c%s-l2-cache-controller",
|
|
tolower(cpu->name[0]), cpu->name + 1) + 1;
|
|
}
|
|
|
|
/*
|
|
* append "cache" after the NULL character that the previous
|
|
* sprintf wrote. This is how a device tree stores multiple
|
|
* strings in a property.
|
|
*/
|
|
len += sprintf(buf + len, "cache") + 1;
|
|
|
|
fdt_setprop(blob, off, "compatible", buf, len);
|
|
}
|
|
fdt_setprop(blob, off, "cache-unified", NULL, 0);
|
|
fdt_setprop_cell(blob, off, "cache-block-size", line_size);
|
|
fdt_setprop_cell(blob, off, "cache-size", size);
|
|
fdt_setprop_cell(blob, off, "cache-sets", num_sets);
|
|
fdt_setprop_cell(blob, off, "cache-level", 2);
|
|
|
|
/* we dont bother w/L3 since no platform of this type has one */
|
|
}
|
|
#elif defined(CONFIG_BACKSIDE_L2_CACHE)
|
|
static inline void ft_fixup_l2cache(void *blob)
|
|
{
|
|
int off, l2_off, l3_off = -1;
|
|
u32 *ph;
|
|
u32 l2cfg0 = mfspr(SPRN_L2CFG0);
|
|
u32 size, line_size, num_ways, num_sets;
|
|
int has_l2 = 1;
|
|
|
|
/* P2040/P2040E has no L2, so dont set any L2 props */
|
|
if ((SVR_SOC_VER(get_svr()) == SVR_P2040) ||
|
|
(SVR_SOC_VER(get_svr()) == SVR_P2040_E))
|
|
has_l2 = 0;
|
|
|
|
size = (l2cfg0 & 0x3fff) * 64 * 1024;
|
|
num_ways = ((l2cfg0 >> 14) & 0x1f) + 1;
|
|
line_size = (((l2cfg0 >> 23) & 0x3) + 1) * 32;
|
|
num_sets = size / (line_size * num_ways);
|
|
|
|
off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
|
|
|
|
while (off != -FDT_ERR_NOTFOUND) {
|
|
ph = (u32 *)fdt_getprop(blob, off, "next-level-cache", 0);
|
|
|
|
if (ph == NULL) {
|
|
debug("no next-level-cache property\n");
|
|
goto next;
|
|
}
|
|
|
|
l2_off = fdt_node_offset_by_phandle(blob, *ph);
|
|
if (l2_off < 0) {
|
|
printf("%s: %s\n", __func__, fdt_strerror(off));
|
|
goto next;
|
|
}
|
|
|
|
if (has_l2) {
|
|
#ifdef CONFIG_SYS_CACHE_STASHING
|
|
u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
|
|
if (reg)
|
|
fdt_setprop_cell(blob, l2_off, "cache-stash-id",
|
|
(*reg * 2) + 32 + 1);
|
|
#endif
|
|
|
|
fdt_setprop(blob, l2_off, "cache-unified", NULL, 0);
|
|
fdt_setprop_cell(blob, l2_off, "cache-block-size",
|
|
line_size);
|
|
fdt_setprop_cell(blob, l2_off, "cache-size", size);
|
|
fdt_setprop_cell(blob, l2_off, "cache-sets", num_sets);
|
|
fdt_setprop_cell(blob, l2_off, "cache-level", 2);
|
|
fdt_setprop(blob, l2_off, "compatible", "cache", 6);
|
|
}
|
|
|
|
if (l3_off < 0) {
|
|
ph = (u32 *)fdt_getprop(blob, l2_off, "next-level-cache", 0);
|
|
|
|
if (ph == NULL) {
|
|
debug("no next-level-cache property\n");
|
|
goto next;
|
|
}
|
|
l3_off = *ph;
|
|
}
|
|
next:
|
|
off = fdt_node_offset_by_prop_value(blob, off,
|
|
"device_type", "cpu", 4);
|
|
}
|
|
if (l3_off > 0) {
|
|
l3_off = fdt_node_offset_by_phandle(blob, l3_off);
|
|
if (l3_off < 0) {
|
|
printf("%s: %s\n", __func__, fdt_strerror(off));
|
|
return ;
|
|
}
|
|
ft_fixup_l3cache(blob, l3_off);
|
|
}
|
|
}
|
|
#else
|
|
#define ft_fixup_l2cache(x)
|
|
#endif
|
|
|
|
static inline void ft_fixup_cache(void *blob)
|
|
{
|
|
int off;
|
|
|
|
off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
|
|
|
|
while (off != -FDT_ERR_NOTFOUND) {
|
|
u32 l1cfg0 = mfspr(SPRN_L1CFG0);
|
|
u32 l1cfg1 = mfspr(SPRN_L1CFG1);
|
|
u32 isize, iline_size, inum_sets, inum_ways;
|
|
u32 dsize, dline_size, dnum_sets, dnum_ways;
|
|
|
|
/* d-side config */
|
|
dsize = (l1cfg0 & 0x7ff) * 1024;
|
|
dnum_ways = ((l1cfg0 >> 11) & 0xff) + 1;
|
|
dline_size = (((l1cfg0 >> 23) & 0x3) + 1) * 32;
|
|
dnum_sets = dsize / (dline_size * dnum_ways);
|
|
|
|
fdt_setprop_cell(blob, off, "d-cache-block-size", dline_size);
|
|
fdt_setprop_cell(blob, off, "d-cache-size", dsize);
|
|
fdt_setprop_cell(blob, off, "d-cache-sets", dnum_sets);
|
|
|
|
#ifdef CONFIG_SYS_CACHE_STASHING
|
|
{
|
|
u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
|
|
if (reg)
|
|
fdt_setprop_cell(blob, off, "cache-stash-id",
|
|
(*reg * 2) + 32 + 0);
|
|
}
|
|
#endif
|
|
|
|
/* i-side config */
|
|
isize = (l1cfg1 & 0x7ff) * 1024;
|
|
inum_ways = ((l1cfg1 >> 11) & 0xff) + 1;
|
|
iline_size = (((l1cfg1 >> 23) & 0x3) + 1) * 32;
|
|
inum_sets = isize / (iline_size * inum_ways);
|
|
|
|
fdt_setprop_cell(blob, off, "i-cache-block-size", iline_size);
|
|
fdt_setprop_cell(blob, off, "i-cache-size", isize);
|
|
fdt_setprop_cell(blob, off, "i-cache-sets", inum_sets);
|
|
|
|
off = fdt_node_offset_by_prop_value(blob, off,
|
|
"device_type", "cpu", 4);
|
|
}
|
|
|
|
ft_fixup_l2cache(blob);
|
|
}
|
|
|
|
|
|
void fdt_add_enet_stashing(void *fdt)
|
|
{
|
|
do_fixup_by_compat(fdt, "gianfar", "bd-stash", NULL, 0, 1);
|
|
|
|
do_fixup_by_compat_u32(fdt, "gianfar", "rx-stash-len", 96, 1);
|
|
|
|
do_fixup_by_compat_u32(fdt, "gianfar", "rx-stash-idx", 0, 1);
|
|
do_fixup_by_compat(fdt, "fsl,etsec2", "bd-stash", NULL, 0, 1);
|
|
do_fixup_by_compat_u32(fdt, "fsl,etsec2", "rx-stash-len", 96, 1);
|
|
do_fixup_by_compat_u32(fdt, "fsl,etsec2", "rx-stash-idx", 0, 1);
|
|
}
|
|
|
|
#if defined(CONFIG_SYS_DPAA_FMAN) || defined(CONFIG_SYS_DPAA_PME)
|
|
#ifdef CONFIG_SYS_DPAA_FMAN
|
|
static void ft_fixup_clks(void *blob, const char *compat, u32 offset,
|
|
unsigned long freq)
|
|
{
|
|
phys_addr_t phys = offset + CONFIG_SYS_CCSRBAR_PHYS;
|
|
int off = fdt_node_offset_by_compat_reg(blob, compat, phys);
|
|
|
|
if (off >= 0) {
|
|
off = fdt_setprop_cell(blob, off, "clock-frequency", freq);
|
|
if (off > 0)
|
|
printf("WARNING enable to set clock-frequency "
|
|
"for %s: %s\n", compat, fdt_strerror(off));
|
|
}
|
|
}
|
|
#endif
|
|
|
|
static void ft_fixup_dpaa_clks(void *blob)
|
|
{
|
|
sys_info_t sysinfo;
|
|
|
|
get_sys_info(&sysinfo);
|
|
#ifdef CONFIG_SYS_DPAA_FMAN
|
|
ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM1_OFFSET,
|
|
sysinfo.freqFMan[0]);
|
|
|
|
#if (CONFIG_SYS_NUM_FMAN == 2)
|
|
ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM2_OFFSET,
|
|
sysinfo.freqFMan[1]);
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_DPAA_PME
|
|
do_fixup_by_compat_u32(blob, "fsl,pme",
|
|
"clock-frequency", sysinfo.freqPME, 1);
|
|
#endif
|
|
}
|
|
#else
|
|
#define ft_fixup_dpaa_clks(x)
|
|
#endif
|
|
|
|
#ifdef CONFIG_QE
|
|
static void ft_fixup_qe_snum(void *blob)
|
|
{
|
|
unsigned int svr;
|
|
|
|
svr = mfspr(SPRN_SVR);
|
|
if (SVR_SOC_VER(svr) == SVR_8569_E) {
|
|
if(IS_SVR_REV(svr, 1, 0))
|
|
do_fixup_by_compat_u32(blob, "fsl,qe",
|
|
"fsl,qe-num-snums", 46, 1);
|
|
else
|
|
do_fixup_by_compat_u32(blob, "fsl,qe",
|
|
"fsl,qe-num-snums", 76, 1);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* fdt_fixup_fman_firmware -- insert the Fman firmware into the device tree
|
|
*
|
|
* The binding for an Fman firmware node is documented in
|
|
* Documentation/powerpc/dts-bindings/fsl/dpaa/fman.txt. This node contains
|
|
* the actual Fman firmware binary data. The operating system is expected to
|
|
* be able to parse the binary data to determine any attributes it needs.
|
|
*/
|
|
#ifdef CONFIG_SYS_DPAA_FMAN
|
|
void fdt_fixup_fman_firmware(void *blob)
|
|
{
|
|
int rc, fmnode, fwnode = -1;
|
|
uint32_t phandle;
|
|
struct qe_firmware *fmanfw;
|
|
const struct qe_header *hdr;
|
|
unsigned int length;
|
|
uint32_t crc;
|
|
const char *p;
|
|
|
|
/* The first Fman we find will contain the actual firmware. */
|
|
fmnode = fdt_node_offset_by_compatible(blob, -1, "fsl,fman");
|
|
if (fmnode < 0)
|
|
/* Exit silently if there are no Fman devices */
|
|
return;
|
|
|
|
/* If we already have a firmware node, then also exit silently. */
|
|
if (fdt_node_offset_by_compatible(blob, -1, "fsl,fman-firmware") > 0)
|
|
return;
|
|
|
|
/* If the environment variable is not set, then exit silently */
|
|
p = getenv("fman_ucode");
|
|
if (!p)
|
|
return;
|
|
|
|
fmanfw = (struct qe_firmware *) simple_strtoul(p, NULL, 0);
|
|
if (!fmanfw)
|
|
return;
|
|
|
|
hdr = &fmanfw->header;
|
|
length = be32_to_cpu(hdr->length);
|
|
|
|
/* Verify the firmware. */
|
|
if ((hdr->magic[0] != 'Q') || (hdr->magic[1] != 'E') ||
|
|
(hdr->magic[2] != 'F')) {
|
|
printf("Data at %p is not an Fman firmware\n", fmanfw);
|
|
return;
|
|
}
|
|
|
|
if (length > CONFIG_SYS_QE_FMAN_FW_LENGTH) {
|
|
printf("Fman firmware at %p is too large (size=%u)\n",
|
|
fmanfw, length);
|
|
return;
|
|
}
|
|
|
|
length -= sizeof(u32); /* Subtract the size of the CRC */
|
|
crc = be32_to_cpu(*(u32 *)((void *)fmanfw + length));
|
|
if (crc != crc32_no_comp(0, (void *)fmanfw, length)) {
|
|
printf("Fman firmware at %p has invalid CRC\n", fmanfw);
|
|
return;
|
|
}
|
|
|
|
/* Increase the size of the fdt to make room for the node. */
|
|
rc = fdt_increase_size(blob, fmanfw->header.length);
|
|
if (rc < 0) {
|
|
printf("Unable to make room for Fman firmware: %s\n",
|
|
fdt_strerror(rc));
|
|
return;
|
|
}
|
|
|
|
/* Create the firmware node. */
|
|
fwnode = fdt_add_subnode(blob, fmnode, "fman-firmware");
|
|
if (fwnode < 0) {
|
|
char s[64];
|
|
fdt_get_path(blob, fmnode, s, sizeof(s));
|
|
printf("Could not add firmware node to %s: %s\n", s,
|
|
fdt_strerror(fwnode));
|
|
return;
|
|
}
|
|
rc = fdt_setprop_string(blob, fwnode, "compatible", "fsl,fman-firmware");
|
|
if (rc < 0) {
|
|
char s[64];
|
|
fdt_get_path(blob, fwnode, s, sizeof(s));
|
|
printf("Could not add compatible property to node %s: %s\n", s,
|
|
fdt_strerror(rc));
|
|
return;
|
|
}
|
|
phandle = fdt_create_phandle(blob, fwnode);
|
|
if (!phandle) {
|
|
char s[64];
|
|
fdt_get_path(blob, fwnode, s, sizeof(s));
|
|
printf("Could not add phandle property to node %s: %s\n", s,
|
|
fdt_strerror(rc));
|
|
return;
|
|
}
|
|
rc = fdt_setprop(blob, fwnode, "fsl,firmware", fmanfw, fmanfw->header.length);
|
|
if (rc < 0) {
|
|
char s[64];
|
|
fdt_get_path(blob, fwnode, s, sizeof(s));
|
|
printf("Could not add firmware property to node %s: %s\n", s,
|
|
fdt_strerror(rc));
|
|
return;
|
|
}
|
|
|
|
/* Find all other Fman nodes and point them to the firmware node. */
|
|
while ((fmnode = fdt_node_offset_by_compatible(blob, fmnode, "fsl,fman")) > 0) {
|
|
rc = fdt_setprop_cell(blob, fmnode, "fsl,firmware-phandle", phandle);
|
|
if (rc < 0) {
|
|
char s[64];
|
|
fdt_get_path(blob, fmnode, s, sizeof(s));
|
|
printf("Could not add pointer property to node %s: %s\n",
|
|
s, fdt_strerror(rc));
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
#else
|
|
#define fdt_fixup_fman_firmware(x)
|
|
#endif
|
|
|
|
#if defined(CONFIG_PPC_P4080) || defined(CONFIG_PPC_P3060)
|
|
static void fdt_fixup_usb(void *fdt)
|
|
{
|
|
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
u32 rcwsr11 = in_be32(&gur->rcwsr[11]);
|
|
int off;
|
|
|
|
off = fdt_node_offset_by_compatible(fdt, -1, "fsl,mpc85xx-usb2-mph");
|
|
if ((rcwsr11 & FSL_CORENET_RCWSR11_EC1) !=
|
|
FSL_CORENET_RCWSR11_EC1_FM1_USB1)
|
|
fdt_status_disabled(fdt, off);
|
|
|
|
off = fdt_node_offset_by_compatible(fdt, -1, "fsl,mpc85xx-usb2-dr");
|
|
if ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) !=
|
|
FSL_CORENET_RCWSR11_EC2_USB2)
|
|
fdt_status_disabled(fdt, off);
|
|
}
|
|
#else
|
|
#define fdt_fixup_usb(x)
|
|
#endif
|
|
|
|
void ft_cpu_setup(void *blob, bd_t *bd)
|
|
{
|
|
int off;
|
|
int val;
|
|
sys_info_t sysinfo;
|
|
|
|
/* delete crypto node if not on an E-processor */
|
|
if (!IS_E_PROCESSOR(get_svr()))
|
|
fdt_fixup_crypto_node(blob, 0);
|
|
|
|
fdt_fixup_ethernet(blob);
|
|
|
|
fdt_add_enet_stashing(blob);
|
|
|
|
do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
|
|
"timebase-frequency", get_tbclk(), 1);
|
|
do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
|
|
"bus-frequency", bd->bi_busfreq, 1);
|
|
get_sys_info(&sysinfo);
|
|
off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
|
|
while (off != -FDT_ERR_NOTFOUND) {
|
|
u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
|
|
val = cpu_to_fdt32(sysinfo.freqProcessor[*reg]);
|
|
fdt_setprop(blob, off, "clock-frequency", &val, 4);
|
|
off = fdt_node_offset_by_prop_value(blob, off, "device_type",
|
|
"cpu", 4);
|
|
}
|
|
do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
|
|
"bus-frequency", bd->bi_busfreq, 1);
|
|
|
|
do_fixup_by_compat_u32(blob, "fsl,pq3-localbus",
|
|
"bus-frequency", gd->lbc_clk, 1);
|
|
do_fixup_by_compat_u32(blob, "fsl,elbc",
|
|
"bus-frequency", gd->lbc_clk, 1);
|
|
#ifdef CONFIG_QE
|
|
ft_qe_setup(blob);
|
|
ft_fixup_qe_snum(blob);
|
|
#endif
|
|
|
|
fdt_fixup_fman_firmware(blob);
|
|
|
|
#ifdef CONFIG_SYS_NS16550
|
|
do_fixup_by_compat_u32(blob, "ns16550",
|
|
"clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
|
|
#endif
|
|
|
|
#ifdef CONFIG_CPM2
|
|
do_fixup_by_compat_u32(blob, "fsl,cpm2-scc-uart",
|
|
"current-speed", bd->bi_baudrate, 1);
|
|
|
|
do_fixup_by_compat_u32(blob, "fsl,cpm2-brg",
|
|
"clock-frequency", bd->bi_brgfreq, 1);
|
|
#endif
|
|
|
|
#ifdef CONFIG_FSL_CORENET
|
|
do_fixup_by_compat_u32(blob, "fsl,qoriq-clockgen-1.0",
|
|
"clock-frequency", CONFIG_SYS_CLK_FREQ, 1);
|
|
#endif
|
|
|
|
fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
|
|
|
|
#ifdef CONFIG_MP
|
|
ft_fixup_cpu(blob, (u64)bd->bi_memstart + (u64)bd->bi_memsize);
|
|
ft_fixup_num_cores(blob);
|
|
#endif
|
|
|
|
ft_fixup_cache(blob);
|
|
|
|
#if defined(CONFIG_FSL_ESDHC)
|
|
fdt_fixup_esdhc(blob, bd);
|
|
#endif
|
|
|
|
ft_fixup_dpaa_clks(blob);
|
|
|
|
#if defined(CONFIG_SYS_BMAN_MEM_PHYS)
|
|
fdt_portal(blob, "fsl,bman-portal", "bman-portals",
|
|
(u64)CONFIG_SYS_BMAN_MEM_PHYS,
|
|
CONFIG_SYS_BMAN_MEM_SIZE);
|
|
fdt_fixup_bportals(blob);
|
|
#endif
|
|
|
|
#if defined(CONFIG_SYS_QMAN_MEM_PHYS)
|
|
fdt_portal(blob, "fsl,qman-portal", "qman-portals",
|
|
(u64)CONFIG_SYS_QMAN_MEM_PHYS,
|
|
CONFIG_SYS_QMAN_MEM_SIZE);
|
|
|
|
fdt_fixup_qportals(blob);
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_SRIO
|
|
ft_srio_setup(blob);
|
|
#endif
|
|
|
|
/*
|
|
* system-clock = CCB clock/2
|
|
* Here gd->bus_clk = CCB clock
|
|
* We are using the system clock as 1588 Timer reference
|
|
* clock source select
|
|
*/
|
|
do_fixup_by_compat_u32(blob, "fsl,gianfar-ptp-timer",
|
|
"timer-frequency", gd->bus_clk/2, 1);
|
|
|
|
/*
|
|
* clock-freq should change to clock-frequency and
|
|
* flexcan-v1.0 should change to p1010-flexcan respectively
|
|
* in the future.
|
|
*/
|
|
do_fixup_by_compat_u32(blob, "fsl,flexcan-v1.0",
|
|
"clock_freq", gd->bus_clk/2, 1);
|
|
|
|
do_fixup_by_compat_u32(blob, "fsl,flexcan-v1.0",
|
|
"clock-frequency", gd->bus_clk/2, 1);
|
|
|
|
do_fixup_by_compat_u32(blob, "fsl,p1010-flexcan",
|
|
"clock-frequency", gd->bus_clk/2, 1);
|
|
|
|
fdt_fixup_usb(blob);
|
|
}
|
|
|
|
/*
|
|
* For some CCSR devices, we only have the virtual address, not the physical
|
|
* address. This is because we map CCSR as a whole, so we typically don't need
|
|
* a macro for the physical address of any device within CCSR. In this case,
|
|
* we calculate the physical address of that device using it's the difference
|
|
* between the virtual address of the device and the virtual address of the
|
|
* beginning of CCSR.
|
|
*/
|
|
#define CCSR_VIRT_TO_PHYS(x) \
|
|
(CONFIG_SYS_CCSRBAR_PHYS + ((x) - CONFIG_SYS_CCSRBAR))
|
|
|
|
static void msg(const char *name, uint64_t uaddr, uint64_t daddr)
|
|
{
|
|
printf("Warning: U-Boot configured %s at address %llx,\n"
|
|
"but the device tree has it at %llx\n", name, uaddr, daddr);
|
|
}
|
|
|
|
/*
|
|
* Verify the device tree
|
|
*
|
|
* This function compares several CONFIG_xxx macros that contain physical
|
|
* addresses with the corresponding nodes in the device tree, to see if
|
|
* the physical addresses are all correct. For example, if
|
|
* CONFIG_SYS_NS16550_COM1 is defined, then it contains the virtual address
|
|
* of the first UART. We convert this to a physical address and compare
|
|
* that with the physical address of the first ns16550-compatible node
|
|
* in the device tree. If they don't match, then we display a warning.
|
|
*
|
|
* Returns 1 on success, 0 on failure
|
|
*/
|
|
int ft_verify_fdt(void *fdt)
|
|
{
|
|
uint64_t addr = 0;
|
|
int aliases;
|
|
int off;
|
|
|
|
/* First check the CCSR base address */
|
|
off = fdt_node_offset_by_prop_value(fdt, -1, "device_type", "soc", 4);
|
|
if (off > 0)
|
|
addr = fdt_get_base_address(fdt, off);
|
|
|
|
if (!addr) {
|
|
printf("Warning: could not determine base CCSR address in "
|
|
"device tree\n");
|
|
/* No point in checking anything else */
|
|
return 0;
|
|
}
|
|
|
|
if (addr != CONFIG_SYS_CCSRBAR_PHYS) {
|
|
msg("CCSR", CONFIG_SYS_CCSRBAR_PHYS, addr);
|
|
/* No point in checking anything else */
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Check some nodes via aliases. We assume that U-Boot and the device
|
|
* tree enumerate the devices equally. E.g. the first serial port in
|
|
* U-Boot is the same as "serial0" in the device tree.
|
|
*/
|
|
aliases = fdt_path_offset(fdt, "/aliases");
|
|
if (aliases > 0) {
|
|
#ifdef CONFIG_SYS_NS16550_COM1
|
|
if (!fdt_verify_alias_address(fdt, aliases, "serial0",
|
|
CCSR_VIRT_TO_PHYS(CONFIG_SYS_NS16550_COM1)))
|
|
return 0;
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_NS16550_COM2
|
|
if (!fdt_verify_alias_address(fdt, aliases, "serial1",
|
|
CCSR_VIRT_TO_PHYS(CONFIG_SYS_NS16550_COM2)))
|
|
return 0;
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* The localbus node is typically a root node, even though the lbc
|
|
* controller is part of CCSR. If we were to put the lbc node under
|
|
* the SOC node, then the 'ranges' property in the lbc node would
|
|
* translate through the 'ranges' property of the parent SOC node, and
|
|
* we don't want that. Since it's a separate node, it's possible for
|
|
* the 'reg' property to be wrong, so check it here. For now, we
|
|
* only check for "fsl,elbc" nodes.
|
|
*/
|
|
#ifdef CONFIG_SYS_LBC_ADDR
|
|
off = fdt_node_offset_by_compatible(fdt, -1, "fsl,elbc");
|
|
if (off > 0) {
|
|
const u32 *reg = fdt_getprop(fdt, off, "reg", NULL);
|
|
if (reg) {
|
|
uint64_t uaddr = CCSR_VIRT_TO_PHYS(CONFIG_SYS_LBC_ADDR);
|
|
|
|
addr = fdt_translate_address(fdt, off, reg);
|
|
if (uaddr != addr) {
|
|
msg("the localbus", uaddr, addr);
|
|
return 0;
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
|
|
return 1;
|
|
}
|