mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 17:08:52 +09:00
![Andreas Dannenberg](/assets/img/avatar_default.png)
The TI J721E EVM system on module (SOM), the common processor board, and the associated daughtercards have on-board I2C-based EEPROMs containing board config data. Use the board detection infrastructure to do the following: 1) Parse the J721E SOM EEPROM and populate items like board name, board HW and SW revision as well as board serial number into the TI common EEPROM data structure residing in SRAM scratch space 2) Check for presence of daughter card(s) by probing associated I2C addresses used for on-board EEPROMs containing daughter card-specific data. If such a card is found, parse the EEPROM data such as for additional Ethernet MAC addresses and populate those into U-Boot accordingly 3) Dynamically apply daughter card DTB overlays to the U-Boot (proper) DTB during SPL execution 4) Dynamically create an U-Boot ENV variable called name_overlays during U-Boot execution containing a list of daugherboard-specific DTB overlays based on daughercards found to be used during Kernel boot. This patch adds support for the J721E system on module boards containing the actual SoC ("J721EX-PM2-SOM", accessed via CONFIG_EEPROM_CHIP_ADDRESS), the common processor board ("J7X-BASE-CPB"), the Quad-Port Ethernet Expansion Board ("J7X-VSC8514-ETH"), the infotainment board ("J7X-INFOTAN-EXP") as well as for the gateway/Ethernet switch/industrial expansion board ("J7X-GESI-EXP"). Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
798 lines
18 KiB
C
798 lines
18 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Library to support early TI EVM EEPROM handling
|
|
*
|
|
* Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
|
|
* Lokesh Vutla
|
|
* Steve Kipisz
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <eeprom.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/omap_common.h>
|
|
#include <dm/uclass.h>
|
|
#include <env.h>
|
|
#include <i2c.h>
|
|
#include <mmc.h>
|
|
#include <errno.h>
|
|
#include <malloc.h>
|
|
|
|
#include "board_detect.h"
|
|
|
|
#if !defined(CONFIG_DM_I2C)
|
|
/**
|
|
* ti_i2c_eeprom_init - Initialize an i2c bus and probe for a device
|
|
* @i2c_bus: i2c bus number to initialize
|
|
* @dev_addr: Device address to probe for
|
|
*
|
|
* Return: 0 on success or corresponding error on failure.
|
|
*/
|
|
static int __maybe_unused ti_i2c_eeprom_init(int i2c_bus, int dev_addr)
|
|
{
|
|
int rc;
|
|
|
|
if (i2c_bus >= 0) {
|
|
rc = i2c_set_bus_num(i2c_bus);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
|
|
return i2c_probe(dev_addr);
|
|
}
|
|
|
|
/**
|
|
* ti_i2c_eeprom_read - Read data from an EEPROM
|
|
* @dev_addr: The device address of the EEPROM
|
|
* @offset: Offset to start reading in the EEPROM
|
|
* @ep: Pointer to a buffer to read into
|
|
* @epsize: Size of buffer
|
|
*
|
|
* Return: 0 on success or corresponding result of i2c_read
|
|
*/
|
|
static int __maybe_unused ti_i2c_eeprom_read(int dev_addr, int offset,
|
|
uchar *ep, int epsize)
|
|
{
|
|
return i2c_read(dev_addr, offset, 2, ep, epsize);
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* ti_eeprom_string_cleanup() - Handle eeprom programming errors
|
|
* @s: eeprom string (should be NULL terminated)
|
|
*
|
|
* Some Board manufacturers do not add a NULL termination at the
|
|
* end of string, instead some binary information is kludged in, hence
|
|
* convert the string to just printable characters of ASCII chart.
|
|
*/
|
|
static void __maybe_unused ti_eeprom_string_cleanup(char *s)
|
|
{
|
|
int i, l;
|
|
|
|
l = strlen(s);
|
|
for (i = 0; i < l; i++, s++)
|
|
if (*s < ' ' || *s > '~') {
|
|
*s = 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
__weak void gpi2c_init(void)
|
|
{
|
|
}
|
|
|
|
static int __maybe_unused ti_i2c_eeprom_get(int bus_addr, int dev_addr,
|
|
u32 header, u32 size, uint8_t *ep)
|
|
{
|
|
u32 hdr_read;
|
|
int rc;
|
|
|
|
#if defined(CONFIG_DM_I2C)
|
|
struct udevice *dev;
|
|
struct udevice *bus;
|
|
|
|
rc = uclass_get_device_by_seq(UCLASS_I2C, bus_addr, &bus);
|
|
if (rc)
|
|
return rc;
|
|
rc = dm_i2c_probe(bus, dev_addr, 0, &dev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/*
|
|
* Read the header first then only read the other contents.
|
|
*/
|
|
rc = i2c_set_chip_offset_len(dev, 2);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = dm_i2c_read(dev, 0, (uint8_t *)&hdr_read, 4);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* Corrupted data??? */
|
|
if (hdr_read != header) {
|
|
rc = dm_i2c_read(dev, 0, (uint8_t *)&hdr_read, 4);
|
|
/*
|
|
* read the eeprom header using i2c again, but use only a
|
|
* 1 byte address (some legacy boards need this..)
|
|
*/
|
|
if (rc) {
|
|
rc = i2c_set_chip_offset_len(dev, 1);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = dm_i2c_read(dev, 0, (uint8_t *)&hdr_read, 4);
|
|
}
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
if (hdr_read != header)
|
|
return -1;
|
|
|
|
rc = dm_i2c_read(dev, 0, ep, size);
|
|
if (rc)
|
|
return rc;
|
|
#else
|
|
u32 byte;
|
|
|
|
gpi2c_init();
|
|
rc = ti_i2c_eeprom_init(bus_addr, dev_addr);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/*
|
|
* Read the header first then only read the other contents.
|
|
*/
|
|
byte = 2;
|
|
|
|
rc = i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read, 4);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* Corrupted data??? */
|
|
if (hdr_read != header) {
|
|
rc = i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read, 4);
|
|
/*
|
|
* read the eeprom header using i2c again, but use only a
|
|
* 1 byte address (some legacy boards need this..)
|
|
*/
|
|
byte = 1;
|
|
if (rc) {
|
|
rc = i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read,
|
|
4);
|
|
}
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
if (hdr_read != header)
|
|
return -1;
|
|
|
|
rc = i2c_read(dev_addr, 0x0, byte, ep, size);
|
|
if (rc)
|
|
return rc;
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
int __maybe_unused ti_emmc_boardid_get(void)
|
|
{
|
|
int rc;
|
|
struct udevice *dev;
|
|
struct mmc *mmc;
|
|
struct ti_common_eeprom *ep;
|
|
struct ti_am_eeprom brdid;
|
|
struct blk_desc *bdesc;
|
|
uchar *buffer;
|
|
|
|
ep = TI_EEPROM_DATA;
|
|
if (ep->header == TI_EEPROM_HEADER_MAGIC)
|
|
return 0; /* EEPROM has already been read */
|
|
|
|
/* Initialize with a known bad marker for emmc fails.. */
|
|
ep->header = TI_DEAD_EEPROM_MAGIC;
|
|
ep->name[0] = 0x0;
|
|
ep->version[0] = 0x0;
|
|
ep->serial[0] = 0x0;
|
|
ep->config[0] = 0x0;
|
|
|
|
/* uclass object initialization */
|
|
rc = mmc_initialize(NULL);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* Set device to /dev/mmcblk1 */
|
|
rc = uclass_get_device(UCLASS_MMC, 1, &dev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* Grab the mmc device */
|
|
mmc = mmc_get_mmc_dev(dev);
|
|
if (!mmc)
|
|
return -ENODEV;
|
|
|
|
/* mmc hardware initialization routine */
|
|
mmc_init(mmc);
|
|
|
|
/* Set partition to /dev/mmcblk1boot1 */
|
|
rc = mmc_switch_part(mmc, 2);
|
|
if (rc)
|
|
return rc;
|
|
|
|
buffer = malloc(mmc->read_bl_len);
|
|
if (!buffer)
|
|
return -ENOMEM;
|
|
|
|
bdesc = mmc_get_blk_desc(mmc);
|
|
|
|
/* blk_dread returns the number of blocks read*/
|
|
if (blk_dread(bdesc, 0L, 1, buffer) != 1) {
|
|
rc = -EIO;
|
|
goto cleanup;
|
|
}
|
|
|
|
memcpy(&brdid, buffer, sizeof(brdid));
|
|
|
|
/* Write out the ep struct values */
|
|
ep->header = brdid.header;
|
|
strlcpy(ep->name, brdid.name, TI_EEPROM_HDR_NAME_LEN + 1);
|
|
ti_eeprom_string_cleanup(ep->name);
|
|
strlcpy(ep->version, brdid.version, TI_EEPROM_HDR_REV_LEN + 1);
|
|
ti_eeprom_string_cleanup(ep->version);
|
|
strlcpy(ep->serial, brdid.serial, TI_EEPROM_HDR_SERIAL_LEN + 1);
|
|
ti_eeprom_string_cleanup(ep->serial);
|
|
|
|
cleanup:
|
|
free(buffer);
|
|
|
|
return rc;
|
|
}
|
|
|
|
int __maybe_unused ti_i2c_eeprom_am_set(const char *name, const char *rev)
|
|
{
|
|
struct ti_common_eeprom *ep;
|
|
|
|
if (!name || !rev)
|
|
return -1;
|
|
|
|
ep = TI_EEPROM_DATA;
|
|
if (ep->header == TI_EEPROM_HEADER_MAGIC)
|
|
goto already_set;
|
|
|
|
/* Set to 0 all fields */
|
|
memset(ep, 0, sizeof(*ep));
|
|
strncpy(ep->name, name, TI_EEPROM_HDR_NAME_LEN);
|
|
strncpy(ep->version, rev, TI_EEPROM_HDR_REV_LEN);
|
|
/* Some dummy serial number to identify the platform */
|
|
strncpy(ep->serial, "0000", TI_EEPROM_HDR_SERIAL_LEN);
|
|
/* Mark it with a valid header */
|
|
ep->header = TI_EEPROM_HEADER_MAGIC;
|
|
|
|
already_set:
|
|
return 0;
|
|
}
|
|
|
|
int __maybe_unused ti_i2c_eeprom_am_get(int bus_addr, int dev_addr)
|
|
{
|
|
int rc;
|
|
struct ti_am_eeprom am_ep;
|
|
struct ti_common_eeprom *ep;
|
|
|
|
ep = TI_EEPROM_DATA;
|
|
#ifndef CONFIG_SPL_BUILD
|
|
if (ep->header == TI_EEPROM_HEADER_MAGIC)
|
|
return 0; /* EEPROM has already been read */
|
|
#endif
|
|
|
|
/* Initialize with a known bad marker for i2c fails.. */
|
|
ep->header = TI_DEAD_EEPROM_MAGIC;
|
|
ep->name[0] = 0x0;
|
|
ep->version[0] = 0x0;
|
|
ep->serial[0] = 0x0;
|
|
ep->config[0] = 0x0;
|
|
|
|
rc = ti_i2c_eeprom_get(bus_addr, dev_addr, TI_EEPROM_HEADER_MAGIC,
|
|
sizeof(am_ep), (uint8_t *)&am_ep);
|
|
if (rc)
|
|
return rc;
|
|
|
|
ep->header = am_ep.header;
|
|
strlcpy(ep->name, am_ep.name, TI_EEPROM_HDR_NAME_LEN + 1);
|
|
ti_eeprom_string_cleanup(ep->name);
|
|
|
|
/* BeagleBone Green '1' eeprom, board_rev: 0x1a 0x00 0x00 0x00 */
|
|
if (am_ep.version[0] == 0x1a && am_ep.version[1] == 0x00 &&
|
|
am_ep.version[2] == 0x00 && am_ep.version[3] == 0x00)
|
|
strlcpy(ep->version, "BBG1", TI_EEPROM_HDR_REV_LEN + 1);
|
|
else
|
|
strlcpy(ep->version, am_ep.version, TI_EEPROM_HDR_REV_LEN + 1);
|
|
ti_eeprom_string_cleanup(ep->version);
|
|
strlcpy(ep->serial, am_ep.serial, TI_EEPROM_HDR_SERIAL_LEN + 1);
|
|
ti_eeprom_string_cleanup(ep->serial);
|
|
strlcpy(ep->config, am_ep.config, TI_EEPROM_HDR_CONFIG_LEN + 1);
|
|
ti_eeprom_string_cleanup(ep->config);
|
|
|
|
memcpy(ep->mac_addr, am_ep.mac_addr,
|
|
TI_EEPROM_HDR_NO_OF_MAC_ADDR * TI_EEPROM_HDR_ETH_ALEN);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int __maybe_unused ti_i2c_eeprom_dra7_get(int bus_addr, int dev_addr)
|
|
{
|
|
int rc, offset = 0;
|
|
struct dra7_eeprom dra7_ep;
|
|
struct ti_common_eeprom *ep;
|
|
|
|
ep = TI_EEPROM_DATA;
|
|
#ifndef CONFIG_SPL_BUILD
|
|
if (ep->header == DRA7_EEPROM_HEADER_MAGIC)
|
|
return 0; /* EEPROM has already been read */
|
|
#endif
|
|
|
|
/* Initialize with a known bad marker for i2c fails.. */
|
|
ep->header = TI_DEAD_EEPROM_MAGIC;
|
|
ep->name[0] = 0x0;
|
|
ep->version[0] = 0x0;
|
|
ep->serial[0] = 0x0;
|
|
ep->config[0] = 0x0;
|
|
ep->emif1_size = 0;
|
|
ep->emif2_size = 0;
|
|
|
|
rc = ti_i2c_eeprom_get(bus_addr, dev_addr, DRA7_EEPROM_HEADER_MAGIC,
|
|
sizeof(dra7_ep), (uint8_t *)&dra7_ep);
|
|
if (rc)
|
|
return rc;
|
|
|
|
ep->header = dra7_ep.header;
|
|
strlcpy(ep->name, dra7_ep.name, TI_EEPROM_HDR_NAME_LEN + 1);
|
|
ti_eeprom_string_cleanup(ep->name);
|
|
|
|
offset = dra7_ep.version_major - 1;
|
|
|
|
/* Rev F is skipped */
|
|
if (offset >= 5)
|
|
offset = offset + 1;
|
|
snprintf(ep->version, TI_EEPROM_HDR_REV_LEN + 1, "%c.%d",
|
|
'A' + offset, dra7_ep.version_minor);
|
|
ti_eeprom_string_cleanup(ep->version);
|
|
ep->emif1_size = (u64)dra7_ep.emif1_size;
|
|
ep->emif2_size = (u64)dra7_ep.emif2_size;
|
|
strlcpy(ep->config, dra7_ep.config, TI_EEPROM_HDR_CONFIG_LEN + 1);
|
|
ti_eeprom_string_cleanup(ep->config);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ti_i2c_eeprom_am6_parse_record(struct ti_am6_eeprom_record *record,
|
|
struct ti_am6_eeprom *ep,
|
|
char **mac_addr,
|
|
u8 mac_addr_max_cnt,
|
|
u8 *mac_addr_cnt)
|
|
{
|
|
switch (record->header.id) {
|
|
case TI_AM6_EEPROM_RECORD_BOARD_INFO:
|
|
if (record->header.len != sizeof(record->data.board_info))
|
|
return -EINVAL;
|
|
|
|
if (!ep)
|
|
break;
|
|
|
|
/* Populate (and clean, if needed) the board name */
|
|
strlcpy(ep->name, record->data.board_info.name,
|
|
sizeof(ep->name));
|
|
ti_eeprom_string_cleanup(ep->name);
|
|
|
|
/* Populate selected other fields from the board info record */
|
|
strlcpy(ep->version, record->data.board_info.version,
|
|
sizeof(ep->version));
|
|
strlcpy(ep->software_revision,
|
|
record->data.board_info.software_revision,
|
|
sizeof(ep->software_revision));
|
|
strlcpy(ep->serial, record->data.board_info.serial,
|
|
sizeof(ep->serial));
|
|
break;
|
|
case TI_AM6_EEPROM_RECORD_MAC_INFO:
|
|
if (record->header.len != sizeof(record->data.mac_info))
|
|
return -EINVAL;
|
|
|
|
if (!mac_addr || !mac_addr_max_cnt)
|
|
break;
|
|
|
|
*mac_addr_cnt = ((record->data.mac_info.mac_control &
|
|
TI_AM6_EEPROM_MAC_ADDR_COUNT_MASK) >>
|
|
TI_AM6_EEPROM_MAC_ADDR_COUNT_SHIFT) + 1;
|
|
|
|
/*
|
|
* The EEPROM can (but may not) hold a very large amount
|
|
* of MAC addresses, by far exceeding what we want/can store
|
|
* in the common memory array, so only grab what we can fit.
|
|
* Note that a value of 0 means 1 MAC address, and so on.
|
|
*/
|
|
*mac_addr_cnt = min(*mac_addr_cnt, mac_addr_max_cnt);
|
|
|
|
memcpy(mac_addr, record->data.mac_info.mac_addr,
|
|
*mac_addr_cnt * TI_EEPROM_HDR_ETH_ALEN);
|
|
break;
|
|
case 0x00:
|
|
/* Illegal value... Fall through... */
|
|
case 0xFF:
|
|
/* Illegal value... Something went horribly wrong... */
|
|
return -EINVAL;
|
|
default:
|
|
pr_warn("%s: Ignoring record id %u\n", __func__,
|
|
record->header.id);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int __maybe_unused ti_i2c_eeprom_am6_get(int bus_addr, int dev_addr,
|
|
struct ti_am6_eeprom *ep,
|
|
char **mac_addr,
|
|
u8 mac_addr_max_cnt,
|
|
u8 *mac_addr_cnt)
|
|
{
|
|
struct udevice *dev;
|
|
struct udevice *bus;
|
|
unsigned int eeprom_addr;
|
|
struct ti_am6_eeprom_record_board_id board_id;
|
|
struct ti_am6_eeprom_record record;
|
|
int rc;
|
|
|
|
/* Initialize with a known bad marker for i2c fails.. */
|
|
memset(ep, 0, sizeof(*ep));
|
|
ep->header = TI_DEAD_EEPROM_MAGIC;
|
|
|
|
/* Read the board ID record which is always the first EEPROM record */
|
|
rc = ti_i2c_eeprom_get(bus_addr, dev_addr, TI_EEPROM_HEADER_MAGIC,
|
|
sizeof(board_id), (uint8_t *)&board_id);
|
|
if (rc)
|
|
return rc;
|
|
|
|
if (board_id.header.id != TI_AM6_EEPROM_RECORD_BOARD_ID) {
|
|
pr_err("%s: Invalid board ID record!\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Establish DM handle to board config EEPROM */
|
|
rc = uclass_get_device_by_seq(UCLASS_I2C, bus_addr, &bus);
|
|
if (rc)
|
|
return rc;
|
|
rc = i2c_get_chip(bus, dev_addr, 1, &dev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
ep->header = TI_EEPROM_HEADER_MAGIC;
|
|
|
|
/* Ready to parse TLV structure. Initialize variables... */
|
|
*mac_addr_cnt = 0;
|
|
|
|
/*
|
|
* After the all-encompassing board ID record all other records follow
|
|
* a TLV-type scheme. Point to the first such record and then start
|
|
* parsing those one by one.
|
|
*/
|
|
eeprom_addr = sizeof(board_id);
|
|
|
|
while (true) {
|
|
rc = dm_i2c_read(dev, eeprom_addr, (uint8_t *)&record.header,
|
|
sizeof(record.header));
|
|
if (rc)
|
|
return rc;
|
|
|
|
/*
|
|
* Check for end of list marker. If we reached it don't go
|
|
* any further and stop parsing right here.
|
|
*/
|
|
if (record.header.id == TI_AM6_EEPROM_RECORD_END_LIST)
|
|
break;
|
|
|
|
eeprom_addr += sizeof(record.header);
|
|
|
|
debug("%s: dev_addr=0x%02x header.id=%u header.len=%u\n",
|
|
__func__, dev_addr, record.header.id,
|
|
record.header.len);
|
|
|
|
/* Read record into memory if it fits */
|
|
if (record.header.len <= sizeof(record.data)) {
|
|
rc = dm_i2c_read(dev, eeprom_addr,
|
|
(uint8_t *)&record.data,
|
|
record.header.len);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* Process record */
|
|
rc = ti_i2c_eeprom_am6_parse_record(&record, ep,
|
|
mac_addr,
|
|
mac_addr_max_cnt,
|
|
mac_addr_cnt);
|
|
if (rc) {
|
|
pr_err("%s: EEPROM parsing error!\n", __func__);
|
|
return rc;
|
|
}
|
|
} else {
|
|
/*
|
|
* We may get here in case of larger records which
|
|
* are not yet understood.
|
|
*/
|
|
pr_err("%s: Ignoring record id %u\n", __func__,
|
|
record.header.id);
|
|
}
|
|
|
|
eeprom_addr += record.header.len;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int __maybe_unused ti_i2c_eeprom_am6_get_base(int bus_addr, int dev_addr)
|
|
{
|
|
struct ti_am6_eeprom *ep = TI_AM6_EEPROM_DATA;
|
|
int ret;
|
|
|
|
/*
|
|
* Always execute EEPROM read by not allowing to bypass it during the
|
|
* first invocation of SPL which happens on the R5 core.
|
|
*/
|
|
#if !(defined(CONFIG_SPL_BUILD) && defined(CONFIG_CPU_V7R))
|
|
if (ep->header == TI_EEPROM_HEADER_MAGIC) {
|
|
debug("%s: EEPROM has already been read\n", __func__);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
ret = ti_i2c_eeprom_am6_get(bus_addr, dev_addr, ep,
|
|
(char **)ep->mac_addr,
|
|
AM6_EEPROM_HDR_NO_OF_MAC_ADDR,
|
|
&ep->mac_addr_cnt);
|
|
return ret;
|
|
}
|
|
|
|
bool __maybe_unused board_ti_k3_is(char *name_tag)
|
|
{
|
|
struct ti_am6_eeprom *ep = TI_AM6_EEPROM_DATA;
|
|
|
|
if (ep->header == TI_DEAD_EEPROM_MAGIC)
|
|
return false;
|
|
return !strncmp(ep->name, name_tag, AM6_EEPROM_HDR_NAME_LEN);
|
|
}
|
|
|
|
bool __maybe_unused board_ti_is(char *name_tag)
|
|
{
|
|
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
|
|
|
|
if (ep->header == TI_DEAD_EEPROM_MAGIC)
|
|
return false;
|
|
return !strncmp(ep->name, name_tag, TI_EEPROM_HDR_NAME_LEN);
|
|
}
|
|
|
|
bool __maybe_unused board_ti_rev_is(char *rev_tag, int cmp_len)
|
|
{
|
|
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
|
|
int l;
|
|
|
|
if (ep->header == TI_DEAD_EEPROM_MAGIC)
|
|
return false;
|
|
|
|
l = cmp_len > TI_EEPROM_HDR_REV_LEN ? TI_EEPROM_HDR_REV_LEN : cmp_len;
|
|
return !strncmp(ep->version, rev_tag, l);
|
|
}
|
|
|
|
char * __maybe_unused board_ti_get_rev(void)
|
|
{
|
|
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
|
|
|
|
/* if ep->header == TI_DEAD_EEPROM_MAGIC, this is empty already */
|
|
return ep->version;
|
|
}
|
|
|
|
char * __maybe_unused board_ti_get_config(void)
|
|
{
|
|
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
|
|
|
|
/* if ep->header == TI_DEAD_EEPROM_MAGIC, this is empty already */
|
|
return ep->config;
|
|
}
|
|
|
|
char * __maybe_unused board_ti_get_name(void)
|
|
{
|
|
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
|
|
|
|
/* if ep->header == TI_DEAD_EEPROM_MAGIC, this is empty already */
|
|
return ep->name;
|
|
}
|
|
|
|
void __maybe_unused
|
|
board_ti_get_eth_mac_addr(int index,
|
|
u8 mac_addr[TI_EEPROM_HDR_ETH_ALEN])
|
|
{
|
|
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
|
|
|
|
if (ep->header == TI_DEAD_EEPROM_MAGIC)
|
|
goto fail;
|
|
|
|
if (index < 0 || index >= TI_EEPROM_HDR_NO_OF_MAC_ADDR)
|
|
goto fail;
|
|
|
|
memcpy(mac_addr, ep->mac_addr[index], TI_EEPROM_HDR_ETH_ALEN);
|
|
return;
|
|
|
|
fail:
|
|
memset(mac_addr, 0, TI_EEPROM_HDR_ETH_ALEN);
|
|
}
|
|
|
|
void __maybe_unused
|
|
board_ti_am6_get_eth_mac_addr(int index,
|
|
u8 mac_addr[TI_EEPROM_HDR_ETH_ALEN])
|
|
{
|
|
struct ti_am6_eeprom *ep = TI_AM6_EEPROM_DATA;
|
|
|
|
if (ep->header == TI_DEAD_EEPROM_MAGIC)
|
|
goto fail;
|
|
|
|
if (index < 0 || index >= ep->mac_addr_cnt)
|
|
goto fail;
|
|
|
|
memcpy(mac_addr, ep->mac_addr[index], TI_EEPROM_HDR_ETH_ALEN);
|
|
return;
|
|
|
|
fail:
|
|
memset(mac_addr, 0, TI_EEPROM_HDR_ETH_ALEN);
|
|
}
|
|
|
|
u64 __maybe_unused board_ti_get_emif1_size(void)
|
|
{
|
|
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
|
|
|
|
if (ep->header != DRA7_EEPROM_HEADER_MAGIC)
|
|
return 0;
|
|
|
|
return ep->emif1_size;
|
|
}
|
|
|
|
u64 __maybe_unused board_ti_get_emif2_size(void)
|
|
{
|
|
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
|
|
|
|
if (ep->header != DRA7_EEPROM_HEADER_MAGIC)
|
|
return 0;
|
|
|
|
return ep->emif2_size;
|
|
}
|
|
|
|
void __maybe_unused set_board_info_env(char *name)
|
|
{
|
|
char *unknown = "unknown";
|
|
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
|
|
|
|
if (name)
|
|
env_set("board_name", name);
|
|
else if (ep->name)
|
|
env_set("board_name", ep->name);
|
|
else
|
|
env_set("board_name", unknown);
|
|
|
|
if (ep->version)
|
|
env_set("board_rev", ep->version);
|
|
else
|
|
env_set("board_rev", unknown);
|
|
|
|
if (ep->serial)
|
|
env_set("board_serial", ep->serial);
|
|
else
|
|
env_set("board_serial", unknown);
|
|
}
|
|
|
|
void __maybe_unused set_board_info_env_am6(char *name)
|
|
{
|
|
char *unknown = "unknown";
|
|
struct ti_am6_eeprom *ep = TI_AM6_EEPROM_DATA;
|
|
|
|
if (name)
|
|
env_set("board_name", name);
|
|
else if (ep->name)
|
|
env_set("board_name", ep->name);
|
|
else
|
|
env_set("board_name", unknown);
|
|
|
|
if (ep->version)
|
|
env_set("board_rev", ep->version);
|
|
else
|
|
env_set("board_rev", unknown);
|
|
|
|
if (ep->software_revision)
|
|
env_set("board_software_revision", ep->software_revision);
|
|
else
|
|
env_set("board_software_revision", unknown);
|
|
|
|
if (ep->serial)
|
|
env_set("board_serial", ep->serial);
|
|
else
|
|
env_set("board_serial", unknown);
|
|
}
|
|
|
|
static u64 mac_to_u64(u8 mac[6])
|
|
{
|
|
int i;
|
|
u64 addr = 0;
|
|
|
|
for (i = 0; i < 6; i++) {
|
|
addr <<= 8;
|
|
addr |= mac[i];
|
|
}
|
|
|
|
return addr;
|
|
}
|
|
|
|
static void u64_to_mac(u64 addr, u8 mac[6])
|
|
{
|
|
mac[5] = addr;
|
|
mac[4] = addr >> 8;
|
|
mac[3] = addr >> 16;
|
|
mac[2] = addr >> 24;
|
|
mac[1] = addr >> 32;
|
|
mac[0] = addr >> 40;
|
|
}
|
|
|
|
void board_ti_set_ethaddr(int index)
|
|
{
|
|
uint8_t mac_addr[6];
|
|
int i;
|
|
u64 mac1, mac2;
|
|
u8 mac_addr1[6], mac_addr2[6];
|
|
int num_macs;
|
|
/*
|
|
* Export any Ethernet MAC addresses from EEPROM.
|
|
* The 2 MAC addresses in EEPROM define the address range.
|
|
*/
|
|
board_ti_get_eth_mac_addr(0, mac_addr1);
|
|
board_ti_get_eth_mac_addr(1, mac_addr2);
|
|
|
|
if (is_valid_ethaddr(mac_addr1) && is_valid_ethaddr(mac_addr2)) {
|
|
mac1 = mac_to_u64(mac_addr1);
|
|
mac2 = mac_to_u64(mac_addr2);
|
|
|
|
/* must contain an address range */
|
|
num_macs = mac2 - mac1 + 1;
|
|
if (num_macs <= 0)
|
|
return;
|
|
|
|
if (num_macs > 50) {
|
|
printf("%s: Too many MAC addresses: %d. Limiting to 50\n",
|
|
__func__, num_macs);
|
|
num_macs = 50;
|
|
}
|
|
|
|
for (i = 0; i < num_macs; i++) {
|
|
u64_to_mac(mac1 + i, mac_addr);
|
|
if (is_valid_ethaddr(mac_addr)) {
|
|
eth_env_set_enetaddr_by_index("eth", i + index,
|
|
mac_addr);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
void board_ti_am6_set_ethaddr(int index, int count)
|
|
{
|
|
u8 mac_addr[6];
|
|
int i;
|
|
|
|
for (i = 0; i < count; i++) {
|
|
board_ti_am6_get_eth_mac_addr(i, mac_addr);
|
|
if (is_valid_ethaddr(mac_addr))
|
|
eth_env_set_enetaddr_by_index("eth", i + index,
|
|
mac_addr);
|
|
}
|
|
}
|
|
|
|
bool __maybe_unused board_ti_was_eeprom_read(void)
|
|
{
|
|
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
|
|
|
|
if (ep->header == TI_EEPROM_HEADER_MAGIC)
|
|
return true;
|
|
else
|
|
return false;
|
|
}
|