mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-21 01:18:52 +09:00
![Simon Glass](/assets/img/avatar_default.png)
At present this method uses a non-const udevice pointer, but the call should not modify the device. Use a const pointer. Signed-off-by: Simon Glass <sjg@chromium.org>
233 lines
6.7 KiB
C
233 lines
6.7 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* SH7751 PCI Controller (PCIC) for U-Boot.
|
|
* (C) Dustin McIntire (dustin@sensoria.com)
|
|
* (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <pci.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/io.h>
|
|
#include <asm/pci.h>
|
|
|
|
/* Register addresses and such */
|
|
#define SH7751_BCR1 (vu_long *)0xFF800000
|
|
#define SH7751_BCR2 (vu_short *)0xFF800004
|
|
#define SH7751_WCR1 (vu_long *)0xFF800008
|
|
#define SH7751_WCR2 (vu_long *)0xFF80000C
|
|
#define SH7751_WCR3 (vu_long *)0xFF800010
|
|
#define SH7751_MCR (vu_long *)0xFF800014
|
|
#define SH7751_BCR3 (vu_short *)0xFF800050
|
|
#define SH7751_PCICONF0 (vu_long *)0xFE200000
|
|
#define SH7751_PCICONF1 (vu_long *)0xFE200004
|
|
#define SH7751_PCICONF2 (vu_long *)0xFE200008
|
|
#define SH7751_PCICONF3 (vu_long *)0xFE20000C
|
|
#define SH7751_PCICONF4 (vu_long *)0xFE200010
|
|
#define SH7751_PCICONF5 (vu_long *)0xFE200014
|
|
#define SH7751_PCICONF6 (vu_long *)0xFE200018
|
|
#define SH7751_PCICR (vu_long *)0xFE200100
|
|
#define SH7751_PCILSR0 (vu_long *)0xFE200104
|
|
#define SH7751_PCILSR1 (vu_long *)0xFE200108
|
|
#define SH7751_PCILAR0 (vu_long *)0xFE20010C
|
|
#define SH7751_PCILAR1 (vu_long *)0xFE200110
|
|
#define SH7751_PCIMBR (vu_long *)0xFE2001C4
|
|
#define SH7751_PCIIOBR (vu_long *)0xFE2001C8
|
|
#define SH7751_PCIPINT (vu_long *)0xFE2001CC
|
|
#define SH7751_PCIPINTM (vu_long *)0xFE2001D0
|
|
#define SH7751_PCICLKR (vu_long *)0xFE2001D4
|
|
#define SH7751_PCIBCR1 (vu_long *)0xFE2001E0
|
|
#define SH7751_PCIBCR2 (vu_long *)0xFE2001E4
|
|
#define SH7751_PCIWCR1 (vu_long *)0xFE2001E8
|
|
#define SH7751_PCIWCR2 (vu_long *)0xFE2001EC
|
|
#define SH7751_PCIWCR3 (vu_long *)0xFE2001F0
|
|
#define SH7751_PCIMCR (vu_long *)0xFE2001F4
|
|
#define SH7751_PCIBCR3 (vu_long *)0xFE2001F8
|
|
|
|
#define BCR1_BREQEN 0x00080000
|
|
#define PCI_SH7751_ID 0x35051054
|
|
#define PCI_SH7751R_ID 0x350E1054
|
|
#define SH7751_PCICONF1_WCC 0x00000080
|
|
#define SH7751_PCICONF1_PER 0x00000040
|
|
#define SH7751_PCICONF1_BUM 0x00000004
|
|
#define SH7751_PCICONF1_MES 0x00000002
|
|
#define SH7751_PCICONF1_CMDS 0x000000C6
|
|
#define SH7751_PCI_HOST_BRIDGE 0x6
|
|
#define SH7751_PCICR_PREFIX 0xa5000000
|
|
#define SH7751_PCICR_PRST 0x00000002
|
|
#define SH7751_PCICR_CFIN 0x00000001
|
|
#define SH7751_PCIPINT_D3 0x00000002
|
|
#define SH7751_PCIPINT_D0 0x00000001
|
|
#define SH7751_PCICLKR_PREFIX 0xa5000000
|
|
|
|
#define SH7751_PCI_MEM_BASE 0xFD000000
|
|
#define SH7751_PCI_MEM_SIZE 0x01000000
|
|
#define SH7751_PCI_IO_BASE 0xFE240000
|
|
#define SH7751_PCI_IO_SIZE 0x00040000
|
|
|
|
#define SH7751_PCIPAR (vu_long *)0xFE2001C0
|
|
#define SH7751_PCIPDR (vu_long *)0xFE200220
|
|
|
|
#define p4_in(addr) (*addr)
|
|
#define p4_out(data, addr) (*addr) = (data)
|
|
|
|
static int sh7751_pci_addr_valid(pci_dev_t d, uint offset)
|
|
{
|
|
if (PCI_FUNC(d))
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u32 get_bus_address(const struct udevice *dev, pci_dev_t bdf, u32 offset)
|
|
{
|
|
return BIT(31) | (PCI_DEV(bdf) << 8) | (offset & ~3);
|
|
}
|
|
|
|
static int sh7751_pci_read_config(const struct udevice *dev, pci_dev_t bdf,
|
|
uint offset, ulong *value,
|
|
enum pci_size_t size)
|
|
{
|
|
u32 addr, reg;
|
|
int ret;
|
|
|
|
ret = sh7751_pci_addr_valid(bdf, offset);
|
|
if (ret) {
|
|
*value = pci_get_ff(size);
|
|
return 0;
|
|
}
|
|
|
|
addr = get_bus_address(dev, bdf, offset);
|
|
p4_out(addr, SH7751_PCIPAR);
|
|
reg = p4_in(SH7751_PCIPDR);
|
|
*value = pci_conv_32_to_size(reg, offset, size);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sh7751_pci_write_config(struct udevice *dev, pci_dev_t bdf,
|
|
uint offset, ulong value,
|
|
enum pci_size_t size)
|
|
{
|
|
u32 addr, reg, old;
|
|
int ret;
|
|
|
|
ret = sh7751_pci_addr_valid(bdf, offset);
|
|
if (ret)
|
|
return ret;
|
|
|
|
addr = get_bus_address(dev, bdf, offset);
|
|
p4_out(addr, SH7751_PCIPAR);
|
|
old = p4_in(SH7751_PCIPDR);
|
|
reg = pci_conv_size_to_32(old, value, offset, size);
|
|
p4_out(reg, SH7751_PCIPDR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sh7751_pci_probe(struct udevice *dev)
|
|
{
|
|
/* Double-check that we're a 7751 or 7751R chip */
|
|
if (p4_in(SH7751_PCICONF0) != PCI_SH7751_ID
|
|
&& p4_in(SH7751_PCICONF0) != PCI_SH7751R_ID) {
|
|
printf("PCI: Unknown PCI host bridge.\n");
|
|
return 1;
|
|
}
|
|
printf("PCI: SH7751 PCI host bridge found.\n");
|
|
|
|
/* Double-check some BSC config settings */
|
|
/* (Area 3 non-MPX 32-bit, PCI bus pins) */
|
|
if ((p4_in(SH7751_BCR1) & 0x20008) == 0x20000) {
|
|
printf("SH7751_BCR1 value is wrong(0x%08X)\n",
|
|
(unsigned int)p4_in(SH7751_BCR1));
|
|
return 2;
|
|
}
|
|
if ((p4_in(SH7751_BCR2) & 0xC0) != 0xC0) {
|
|
printf("SH7751_BCR2 value is wrong(0x%08X)\n",
|
|
(unsigned int)p4_in(SH7751_BCR2));
|
|
return 3;
|
|
}
|
|
if (p4_in(SH7751_BCR2) & 0x01) {
|
|
printf("SH7751_BCR2 value is wrong(0x%08X)\n",
|
|
(unsigned int)p4_in(SH7751_BCR2));
|
|
return 4;
|
|
}
|
|
|
|
/* Force BREQEN in BCR1 to allow PCIC access */
|
|
p4_out((p4_in(SH7751_BCR1) | BCR1_BREQEN), SH7751_BCR1);
|
|
|
|
/* Toggle PCI reset pin */
|
|
p4_out((SH7751_PCICR_PREFIX | SH7751_PCICR_PRST), SH7751_PCICR);
|
|
udelay(32);
|
|
p4_out(SH7751_PCICR_PREFIX, SH7751_PCICR);
|
|
|
|
/* Set cmd bits: WCC, PER, BUM, MES */
|
|
/* (Addr/Data stepping, Parity enabled, Bus Master, Memory enabled) */
|
|
p4_out(0xfb900047, SH7751_PCICONF1); /* K.Kino */
|
|
|
|
/* Define this host as the host bridge */
|
|
p4_out((SH7751_PCI_HOST_BRIDGE << 24), SH7751_PCICONF2);
|
|
|
|
/* Force PCI clock(s) on */
|
|
p4_out(0, SH7751_PCICLKR);
|
|
p4_out(0x03, SH7751_PCICLKR);
|
|
|
|
/* Clear powerdown IRQs, also mask them (unused) */
|
|
p4_out((SH7751_PCIPINT_D0 | SH7751_PCIPINT_D3), SH7751_PCIPINT);
|
|
p4_out(0, SH7751_PCIPINTM);
|
|
|
|
p4_out(0xab000001, SH7751_PCICONF4);
|
|
|
|
/* Set up target memory mappings (for external DMA access) */
|
|
/* Map both P0 and P2 range to Area 3 RAM for ease of use */
|
|
p4_out(CONFIG_SYS_SDRAM_SIZE - 0x100000, SH7751_PCILSR0);
|
|
p4_out(CONFIG_SYS_SDRAM_BASE & 0x1FF00000, SH7751_PCILAR0);
|
|
p4_out(CONFIG_SYS_SDRAM_BASE & 0xFFF00000, SH7751_PCICONF5);
|
|
|
|
p4_out(0, SH7751_PCILSR1);
|
|
p4_out(0, SH7751_PCILAR1);
|
|
p4_out(0xd0000000, SH7751_PCICONF6);
|
|
|
|
/* Map memory window to same address on PCI bus */
|
|
p4_out(SH7751_PCI_MEM_BASE, SH7751_PCIMBR);
|
|
|
|
/* Map IO window to same address on PCI bus */
|
|
p4_out(SH7751_PCI_IO_BASE, SH7751_PCIIOBR);
|
|
|
|
/* set BREQEN */
|
|
p4_out(inl(SH7751_BCR1) | 0x00080000, SH7751_BCR1);
|
|
|
|
/* Copy BSC registers into PCI BSC */
|
|
p4_out(inl(SH7751_BCR1), SH7751_PCIBCR1);
|
|
p4_out(inw(SH7751_BCR2), SH7751_PCIBCR2);
|
|
p4_out(inw(SH7751_BCR3), SH7751_PCIBCR3);
|
|
p4_out(inl(SH7751_WCR1), SH7751_PCIWCR1);
|
|
p4_out(inl(SH7751_WCR2), SH7751_PCIWCR2);
|
|
p4_out(inl(SH7751_WCR3), SH7751_PCIWCR3);
|
|
p4_out(inl(SH7751_MCR), SH7751_PCIMCR);
|
|
|
|
/* Finally, set central function init complete */
|
|
p4_out((SH7751_PCICR_PREFIX | SH7751_PCICR_CFIN), SH7751_PCICR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_pci_ops sh7751_pci_ops = {
|
|
.read_config = sh7751_pci_read_config,
|
|
.write_config = sh7751_pci_write_config,
|
|
};
|
|
|
|
static const struct udevice_id sh7751_pci_ids[] = {
|
|
{ .compatible = "renesas,pci-sh7751" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(sh7751_pci) = {
|
|
.name = "sh7751_pci",
|
|
.id = UCLASS_PCI,
|
|
.of_match = sh7751_pci_ids,
|
|
.ops = &sh7751_pci_ops,
|
|
.probe = sh7751_pci_probe,
|
|
};
|