mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-31 06:18:51 +09:00
![Tom Rini](/assets/img/avatar_default.png)
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
276 lines
6.9 KiB
C
276 lines
6.9 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* board.c
|
|
*
|
|
* Board functions for EETS PDU001 board
|
|
*
|
|
* Copyright (C) 2018, EETS GmbH, http://www.eets.ch/
|
|
*
|
|
* Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <errno.h>
|
|
#include <spl.h>
|
|
#include <i2c.h>
|
|
#include <environment.h>
|
|
#include <watchdog.h>
|
|
#include <debug_uart.h>
|
|
#include <dm/ofnode.h>
|
|
#include <power/pmic.h>
|
|
#include <power/regulator.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/omap.h>
|
|
#include <asm/arch/ddr_defs.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/mmc_host_def.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/arch/mem.h>
|
|
#include <asm/io.h>
|
|
#include <asm/emif.h>
|
|
#include <asm/gpio.h>
|
|
#include "board.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define I2C_ADDR_NODE_ID 0x50
|
|
#define I2C_REG_NODE_ID_BASE 0xfa
|
|
#define NODE_ID_BYTE_COUNT 6
|
|
|
|
#define I2C_ADDR_LEDS 0x60
|
|
#define I2C_REG_RUN_LED 0x06
|
|
#define RUN_LED_OFF 0x0
|
|
#define RUN_LED_RED 0x1
|
|
#define RUN_LED_GREEN (0x1 << 2)
|
|
|
|
#define VDD_MPU_REGULATOR "regulator@2"
|
|
#define VDD_CORE_REGULATOR "regulator@3"
|
|
#define DEFAULT_CORE_VOLTAGE 1137500
|
|
|
|
/*
|
|
* boot device save register
|
|
* -------------------------
|
|
* The boot device can be quired by 'spl_boot_device()' in
|
|
* 'am33xx_spl_board_init'. However it can't be saved in the u-boot
|
|
* environment here. In turn 'spl_boot_device' can't be called in
|
|
* 'board_late_init' which allows writing to u-boot environment.
|
|
* To get the boot device from 'am33xx_spl_board_init' to
|
|
* 'board_late_init' we therefore use a scratch register from the RTC.
|
|
*/
|
|
#define CONFIG_SYS_RTC_SCRATCH0 0x60
|
|
#define BOOT_DEVICE_SAVE_REGISTER (RTC_BASE + CONFIG_SYS_RTC_SCRATCH0)
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
static void save_boot_device(void)
|
|
{
|
|
*((u32 *)(BOOT_DEVICE_SAVE_REGISTER)) = spl_boot_device();
|
|
}
|
|
#endif
|
|
|
|
u32 boot_device(void)
|
|
{
|
|
return *((u32 *)(BOOT_DEVICE_SAVE_REGISTER));
|
|
}
|
|
|
|
/* Store the boot device in the environment variable 'boot_device' */
|
|
static void env_set_boot_device(void)
|
|
{
|
|
switch (boot_device()) {
|
|
case BOOT_DEVICE_MMC1: {
|
|
env_set("boot_device", "emmc");
|
|
break;
|
|
}
|
|
case BOOT_DEVICE_MMC2: {
|
|
env_set("boot_device", "sdcard");
|
|
break;
|
|
}
|
|
default: {
|
|
env_set("boot_device", "unknown");
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void set_run_led(struct udevice *dev)
|
|
{
|
|
int val = RUN_LED_OFF;
|
|
|
|
if (IS_ENABLED(CONFIG_RUN_LED_RED))
|
|
val = RUN_LED_RED;
|
|
else if (IS_ENABLED(CONFIG_RUN_LED_GREEN))
|
|
val = RUN_LED_GREEN;
|
|
|
|
dm_i2c_reg_write(dev, I2C_REG_RUN_LED, val);
|
|
}
|
|
|
|
/* Set 'serial#' to the EUI-48 value of board node ID chip */
|
|
static void env_set_serial(struct udevice *dev)
|
|
{
|
|
int val;
|
|
char serial[2 * NODE_ID_BYTE_COUNT + 1];
|
|
int n;
|
|
|
|
for (n = 0; n < sizeof(serial); n += 2) {
|
|
val = dm_i2c_reg_read(dev, I2C_REG_NODE_ID_BASE + n / 2);
|
|
sprintf(serial + n, "%02X", val);
|
|
}
|
|
serial[2 * NODE_ID_BYTE_COUNT] = '\0';
|
|
env_set("serial#", serial);
|
|
}
|
|
|
|
static void set_mpu_and_core_voltage(void)
|
|
{
|
|
int mpu_vdd;
|
|
int sil_rev;
|
|
struct udevice *dev;
|
|
struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
|
|
|
|
/*
|
|
* The PDU001 (more precisely the computing module m2) uses a
|
|
* TPS65910 PMIC. For all MPU frequencies we support we use a CORE
|
|
* voltage of 1.1375V. For MPU voltage we need to switch based on
|
|
* the frequency we are running at.
|
|
*/
|
|
|
|
/*
|
|
* Depending on MPU clock and PG we will need a different VDD
|
|
* to drive at that speed.
|
|
*/
|
|
sil_rev = readl(&cdev->deviceid) >> 28;
|
|
mpu_vdd = am335x_get_mpu_vdd(sil_rev, dpll_mpu_opp100.m);
|
|
|
|
/* first update the MPU voltage */
|
|
if (!regulator_get_by_devname(VDD_MPU_REGULATOR, &dev)) {
|
|
if (regulator_set_value(dev, mpu_vdd))
|
|
debug("failed to set MPU voltage\n");
|
|
} else {
|
|
debug("invalid MPU voltage ragulator %s\n", VDD_MPU_REGULATOR);
|
|
}
|
|
|
|
/* second update the CORE voltage */
|
|
if (!regulator_get_by_devname(VDD_CORE_REGULATOR, &dev)) {
|
|
if (regulator_set_value(dev, DEFAULT_CORE_VOLTAGE))
|
|
debug("failed to set CORE voltage\n");
|
|
} else {
|
|
debug("invalid CORE voltage ragulator %s\n",
|
|
VDD_CORE_REGULATOR);
|
|
}
|
|
}
|
|
|
|
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
|
|
static const struct ddr_data ddr2_data = {
|
|
.datardsratio0 = MT47H128M16RT25E_RD_DQS,
|
|
.datafwsratio0 = MT47H128M16RT25E_PHY_FIFO_WE,
|
|
.datawrsratio0 = MT47H128M16RT25E_PHY_WR_DATA,
|
|
};
|
|
|
|
static const struct cmd_control ddr2_cmd_ctrl_data = {
|
|
.cmd0csratio = MT47H128M16RT25E_RATIO,
|
|
.cmd1csratio = MT47H128M16RT25E_RATIO,
|
|
.cmd2csratio = MT47H128M16RT25E_RATIO,
|
|
};
|
|
|
|
static const struct emif_regs ddr2_emif_reg_data = {
|
|
.sdram_config = MT47H128M16RT25E_EMIF_SDCFG,
|
|
.ref_ctrl = MT47H128M16RT25E_EMIF_SDREF,
|
|
.sdram_tim1 = MT47H128M16RT25E_EMIF_TIM1,
|
|
.sdram_tim2 = MT47H128M16RT25E_EMIF_TIM2,
|
|
.sdram_tim3 = MT47H128M16RT25E_EMIF_TIM3,
|
|
.emif_ddr_phy_ctlr_1 = MT47H128M16RT25E_EMIF_READ_LATENCY,
|
|
};
|
|
|
|
#define OSC (V_OSCK / 1000000)
|
|
const struct dpll_params dpll_ddr = {
|
|
266, OSC - 1, 1, -1, -1, -1, -1};
|
|
const struct dpll_params dpll_ddr_evm_sk = {
|
|
303, OSC - 1, 1, -1, -1, -1, -1};
|
|
const struct dpll_params dpll_ddr_bone_black = {
|
|
400, OSC - 1, 1, -1, -1, -1, -1};
|
|
|
|
void am33xx_spl_board_init(void)
|
|
{
|
|
struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
|
|
|
|
/* Get the frequency */
|
|
dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev);
|
|
|
|
/* Set CORE Frequencies to OPP100 */
|
|
do_setup_dpll(&dpll_core_regs, &dpll_core_opp100);
|
|
|
|
/* Set MPU Frequency to what we detected now that voltages are set */
|
|
do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100);
|
|
|
|
/* save boot device for later use by 'board_late_init' */
|
|
save_boot_device();
|
|
}
|
|
|
|
const struct dpll_params *get_dpll_ddr_params(void)
|
|
{
|
|
enable_i2c0_pin_mux();
|
|
i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
|
|
|
|
return &dpll_ddr;
|
|
}
|
|
|
|
void set_mux_conf_regs(void)
|
|
{
|
|
/* done first by the ROM and afterwards by the pin controller driver */
|
|
enable_i2c0_pin_mux();
|
|
}
|
|
|
|
const struct ctrl_ioregs ioregs = {
|
|
.cm0ioctl = MT47H128M16RT25E_IOCTRL_VALUE,
|
|
.cm1ioctl = MT47H128M16RT25E_IOCTRL_VALUE,
|
|
.cm2ioctl = MT47H128M16RT25E_IOCTRL_VALUE,
|
|
.dt0ioctl = MT47H128M16RT25E_IOCTRL_VALUE,
|
|
.dt1ioctl = MT47H128M16RT25E_IOCTRL_VALUE,
|
|
};
|
|
|
|
void sdram_init(void)
|
|
{
|
|
config_ddr(266, &ioregs, &ddr2_data,
|
|
&ddr2_cmd_ctrl_data, &ddr2_emif_reg_data, 0);
|
|
}
|
|
#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
|
|
|
|
#ifdef CONFIG_DEBUG_UART
|
|
void board_debug_uart_init(void)
|
|
{
|
|
/* done by pin controller driver if not debugging */
|
|
enable_uart_pin_mux(CONFIG_DEBUG_UART_BASE);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Basic board specific setup. Pinmux has been handled already.
|
|
*/
|
|
int board_init(void)
|
|
{
|
|
#ifdef CONFIG_HW_WATCHDOG
|
|
hw_watchdog_init();
|
|
#endif
|
|
|
|
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_BOARD_LATE_INIT
|
|
int board_late_init(void)
|
|
{
|
|
struct udevice *dev;
|
|
|
|
set_mpu_and_core_voltage();
|
|
env_set_boot_device();
|
|
|
|
/* second I2C bus connects to node ID and front panel LED chip */
|
|
if (!i2c_get_chip_for_busnum(1, I2C_ADDR_LEDS, 1, &dev))
|
|
set_run_led(dev);
|
|
if (!i2c_get_chip_for_busnum(1, I2C_ADDR_NODE_ID, 1, &dev))
|
|
env_set_serial(dev);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|