u-boot-brain/arch/arm/mach-exynos/common_setup.h
Thomas Abraham 14a66afead ARM: exynos: fix regression for Origen4210
The do_lowlevel_init() function includes certian CA15 specific L2 cache
configuration which is only applicable on Exynos5420 and members of its
family. Fix the regression on Origen4210 by skipping the Exynos5420
specific portions of the code.

Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Tested-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-08-17 13:06:55 +09:00

108 lines
2.7 KiB
C

/*
* Common APIs for EXYNOS based board
*
* Copyright (C) 2013 Samsung Electronics
* Rajeshwari Shinde <rajeshwari.s@samsung.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <asm/arch/system.h>
#define DMC_OFFSET 0x10000
/*
* Memory initialization
*
* @param reset Reset PHY during initialization.
*/
void mem_ctrl_init(int reset);
/* System Clock initialization */
void system_clock_init(void);
/*
* Init subsystems according to the reset status
*
* @return 0 for a normal boot, non-zero for a resume
*/
int do_lowlevel_init(void);
void sdelay(unsigned long);
enum l2_cache_params {
CACHE_DATA_RAM_LATENCY_2_CYCLES = (2 << 0),
CACHE_DATA_RAM_LATENCY_3_CYCLES = (3 << 0),
CACHE_DISABLE_CLEAN_EVICT = (1 << 3),
CACHE_DATA_RAM_SETUP = (1 << 5),
CACHE_TAG_RAM_LATENCY_2_CYCLES = (2 << 6),
CACHE_TAG_RAM_LATENCY_3_CYCLES = (3 << 6),
CACHE_ENABLE_HAZARD_DETECT = (1 << 7),
CACHE_TAG_RAM_SETUP = (1 << 9),
CACHE_ECC_AND_PARITY = (1 << 21),
CACHE_ENABLE_FORCE_L2_LOGIC = (1 << 27)
};
#if !defined(CONFIG_SYS_L2CACHE_OFF) && defined(CONFIG_EXYNOS5420)
/*
* Configure L2CTLR to get timings that keep us from hanging/crashing.
*
* Must be inline here since low_power_start() is called without a
* stack (!).
*/
static inline void configure_l2_ctlr(void)
{
uint32_t val;
mrc_l2_ctlr(val);
val |= CACHE_TAG_RAM_SETUP |
CACHE_DATA_RAM_SETUP |
CACHE_TAG_RAM_LATENCY_2_CYCLES |
CACHE_DATA_RAM_LATENCY_2_CYCLES;
if (proid_is_exynos5420() || proid_is_exynos5800()) {
val |= CACHE_ECC_AND_PARITY |
CACHE_TAG_RAM_LATENCY_3_CYCLES |
CACHE_DATA_RAM_LATENCY_3_CYCLES;
}
mcr_l2_ctlr(val);
}
/*
* Configure L2ACTLR.
*
* Must be inline here since low_power_start() is called without a
* stack (!).
*/
static inline void configure_l2_actlr(void)
{
uint32_t val;
if (proid_is_exynos5420() || proid_is_exynos5800()) {
mrc_l2_aux_ctlr(val);
val |= CACHE_ENABLE_FORCE_L2_LOGIC |
CACHE_DISABLE_CLEAN_EVICT;
mcr_l2_aux_ctlr(val);
}
}
#endif