mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-31 06:18:51 +09:00
![Tom Rini](/assets/img/avatar_default.png)
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
247 lines
5.4 KiB
C
247 lines
5.4 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2016 Freescale Semiconductor, Inc.
|
|
*/
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/mach-imx/hab.h>
|
|
|
|
static char *get_reset_cause(char *);
|
|
|
|
#if defined(CONFIG_SECURE_BOOT)
|
|
struct imx_sec_config_fuse_t const imx_sec_config_fuse = {
|
|
.bank = 29,
|
|
.word = 6,
|
|
};
|
|
#endif
|
|
|
|
u32 get_cpu_rev(void)
|
|
{
|
|
/* Temporally hard code the CPU rev to 0x73, rev 1.0. Fix it later */
|
|
return (MXC_CPU_MX7ULP << 12) | (1 << 4);
|
|
}
|
|
|
|
#ifdef CONFIG_REVISION_TAG
|
|
u32 __weak get_board_rev(void)
|
|
{
|
|
return get_cpu_rev();
|
|
}
|
|
#endif
|
|
|
|
enum bt_mode get_boot_mode(void)
|
|
{
|
|
u32 bt0_cfg = 0;
|
|
|
|
bt0_cfg = readl(CMC0_RBASE + 0x40);
|
|
bt0_cfg &= (BT0CFG_LPBOOT_MASK | BT0CFG_DUALBOOT_MASK);
|
|
|
|
if (!(bt0_cfg & BT0CFG_LPBOOT_MASK)) {
|
|
/* No low power boot */
|
|
if (bt0_cfg & BT0CFG_DUALBOOT_MASK)
|
|
return DUAL_BOOT;
|
|
else
|
|
return SINGLE_BOOT;
|
|
}
|
|
|
|
return LOW_POWER_BOOT;
|
|
}
|
|
|
|
int arch_cpu_init(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_BOARD_POSTCLK_INIT
|
|
int board_postclk_init(void)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#define UNLOCK_WORD0 0xC520 /* 1st unlock word */
|
|
#define UNLOCK_WORD1 0xD928 /* 2nd unlock word */
|
|
#define REFRESH_WORD0 0xA602 /* 1st refresh word */
|
|
#define REFRESH_WORD1 0xB480 /* 2nd refresh word */
|
|
|
|
static void disable_wdog(u32 wdog_base)
|
|
{
|
|
writel(UNLOCK_WORD0, (wdog_base + 0x04));
|
|
writel(UNLOCK_WORD1, (wdog_base + 0x04));
|
|
writel(0x0, (wdog_base + 0x0C)); /* Set WIN to 0 */
|
|
writel(0x400, (wdog_base + 0x08)); /* Set timeout to default 0x400 */
|
|
writel(0x120, (wdog_base + 0x00)); /* Disable it and set update */
|
|
|
|
writel(REFRESH_WORD0, (wdog_base + 0x04)); /* Refresh the CNT */
|
|
writel(REFRESH_WORD1, (wdog_base + 0x04));
|
|
}
|
|
|
|
void init_wdog(void)
|
|
{
|
|
/*
|
|
* ROM will configure WDOG1, disable it or enable it
|
|
* depending on FUSE. The update bit is set for reconfigurable.
|
|
* We have to use unlock sequence to reconfigure it.
|
|
* WDOG2 is not touched by ROM, so it will have default value
|
|
* which is enabled. We can directly configure it.
|
|
* To simplify the codes, we still use same reconfigure
|
|
* process as WDOG1. Because the update bit is not set for
|
|
* WDOG2, the unlock sequence won't take effect really.
|
|
* It actually directly configure the wdog.
|
|
* In this function, we will disable both WDOG1 and WDOG2,
|
|
* and set update bit for both. So that kernel can reconfigure them.
|
|
*/
|
|
disable_wdog(WDG1_RBASE);
|
|
disable_wdog(WDG2_RBASE);
|
|
}
|
|
|
|
|
|
void s_init(void)
|
|
{
|
|
/* Disable wdog */
|
|
init_wdog();
|
|
|
|
/* clock configuration. */
|
|
clock_init();
|
|
|
|
return;
|
|
}
|
|
|
|
#ifndef CONFIG_ULP_WATCHDOG
|
|
void reset_cpu(ulong addr)
|
|
{
|
|
setbits_le32(SIM0_RBASE, SIM_SOPT1_A7_SW_RESET);
|
|
while (1)
|
|
;
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_DISPLAY_CPUINFO)
|
|
const char *get_imx_type(u32 imxtype)
|
|
{
|
|
return "7ULP";
|
|
}
|
|
|
|
int print_cpuinfo(void)
|
|
{
|
|
u32 cpurev;
|
|
char cause[18];
|
|
|
|
cpurev = get_cpu_rev();
|
|
|
|
printf("CPU: Freescale i.MX%s rev%d.%d at %d MHz\n",
|
|
get_imx_type((cpurev & 0xFF000) >> 12),
|
|
(cpurev & 0x000F0) >> 4, (cpurev & 0x0000F) >> 0,
|
|
mxc_get_clock(MXC_ARM_CLK) / 1000000);
|
|
|
|
printf("Reset cause: %s\n", get_reset_cause(cause));
|
|
|
|
printf("Boot mode: ");
|
|
switch (get_boot_mode()) {
|
|
case LOW_POWER_BOOT:
|
|
printf("Low power boot\n");
|
|
break;
|
|
case DUAL_BOOT:
|
|
printf("Dual boot\n");
|
|
break;
|
|
case SINGLE_BOOT:
|
|
default:
|
|
printf("Single boot\n");
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#define CMC_SRS_TAMPER (1 << 31)
|
|
#define CMC_SRS_SECURITY (1 << 30)
|
|
#define CMC_SRS_TZWDG (1 << 29)
|
|
#define CMC_SRS_JTAG_RST (1 << 28)
|
|
#define CMC_SRS_CORE1 (1 << 16)
|
|
#define CMC_SRS_LOCKUP (1 << 15)
|
|
#define CMC_SRS_SW (1 << 14)
|
|
#define CMC_SRS_WDG (1 << 13)
|
|
#define CMC_SRS_PIN_RESET (1 << 8)
|
|
#define CMC_SRS_WARM (1 << 4)
|
|
#define CMC_SRS_HVD (1 << 3)
|
|
#define CMC_SRS_LVD (1 << 2)
|
|
#define CMC_SRS_POR (1 << 1)
|
|
#define CMC_SRS_WUP (1 << 0)
|
|
|
|
static u32 reset_cause = -1;
|
|
|
|
static char *get_reset_cause(char *ret)
|
|
{
|
|
u32 cause1, cause = 0, srs = 0;
|
|
u32 *reg_ssrs = (u32 *)(SRC_BASE_ADDR + 0x28);
|
|
u32 *reg_srs = (u32 *)(SRC_BASE_ADDR + 0x20);
|
|
|
|
if (!ret)
|
|
return "null";
|
|
|
|
srs = readl(reg_srs);
|
|
cause1 = readl(reg_ssrs);
|
|
writel(cause1, reg_ssrs);
|
|
|
|
reset_cause = cause1;
|
|
|
|
cause = cause1 & (CMC_SRS_POR | CMC_SRS_WUP | CMC_SRS_WARM);
|
|
|
|
switch (cause) {
|
|
case CMC_SRS_POR:
|
|
sprintf(ret, "%s", "POR");
|
|
break;
|
|
case CMC_SRS_WUP:
|
|
sprintf(ret, "%s", "WUP");
|
|
break;
|
|
case CMC_SRS_WARM:
|
|
cause = cause1 & (CMC_SRS_WDG | CMC_SRS_SW |
|
|
CMC_SRS_JTAG_RST);
|
|
switch (cause) {
|
|
case CMC_SRS_WDG:
|
|
sprintf(ret, "%s", "WARM-WDG");
|
|
break;
|
|
case CMC_SRS_SW:
|
|
sprintf(ret, "%s", "WARM-SW");
|
|
break;
|
|
case CMC_SRS_JTAG_RST:
|
|
sprintf(ret, "%s", "WARM-JTAG");
|
|
break;
|
|
default:
|
|
sprintf(ret, "%s", "WARM-UNKN");
|
|
break;
|
|
}
|
|
break;
|
|
default:
|
|
sprintf(ret, "%s-%X", "UNKN", cause1);
|
|
break;
|
|
}
|
|
|
|
debug("[%X] SRS[%X] %X - ", cause1, srs, srs^cause1);
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_ENV_IS_IN_MMC
|
|
__weak int board_mmc_get_env_dev(int devno)
|
|
{
|
|
return CONFIG_SYS_MMC_ENV_DEV;
|
|
}
|
|
|
|
int mmc_get_env_dev(void)
|
|
{
|
|
int devno = 0;
|
|
u32 bt1_cfg = 0;
|
|
|
|
/* If not boot from sd/mmc, use default value */
|
|
if (get_boot_mode() == LOW_POWER_BOOT)
|
|
return CONFIG_SYS_MMC_ENV_DEV;
|
|
|
|
bt1_cfg = readl(CMC1_RBASE + 0x40);
|
|
devno = (bt1_cfg >> 9) & 0x7;
|
|
|
|
return board_mmc_get_env_dev(devno);
|
|
}
|
|
#endif
|