mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-23 10:28:51 +09:00
![Nobuhiro Iwamatsu](/assets/img/avatar_default.png)
Renesas SH7763 has 2 channel Ethernet device. This is 10/100/1000 Base support. But this patch check 10/100 Base only. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
604 lines
15 KiB
C
604 lines
15 KiB
C
/*
|
|
* sh_eth.c - Driver for Renesas SH7763's ethernet controler.
|
|
*
|
|
* Copyright (C) 2008 Renesas Solutions Corp.
|
|
* Copyright (c) 2008 Nobuhiro Iwamatsu
|
|
* Copyright (c) 2007 Carlos Munoz <carlos@kenati.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <common.h>
|
|
#include <malloc.h>
|
|
#include <net.h>
|
|
#include <asm/errno.h>
|
|
#include <asm/io.h>
|
|
|
|
#include "sh_eth.h"
|
|
|
|
#ifndef CONFIG_SH_ETHER_USE_PORT
|
|
# error "Please define CONFIG_SH_ETHER_USE_PORT"
|
|
#endif
|
|
#ifndef CONFIG_SH_ETHER_PHY_ADDR
|
|
# error "Please define CONFIG_SH_ETHER_PHY_ADDR"
|
|
#endif
|
|
|
|
extern int eth_init(bd_t *bd);
|
|
extern void eth_halt(void);
|
|
extern int eth_rx(void);
|
|
extern int eth_send(volatile void *packet, int length);
|
|
|
|
static struct dev_info_s *dev;
|
|
|
|
/*
|
|
* Bits are written to the PHY serially using the
|
|
* PIR register, just like a bit banger.
|
|
*/
|
|
static void sh_eth_mii_write_phy_bits(int port, u32 val, int len)
|
|
{
|
|
int i;
|
|
u32 pir;
|
|
|
|
/* Bit positions is 1 less than the number of bits */
|
|
for (i = len - 1; i >= 0; i--) {
|
|
/* Write direction, bit to write, clock is low */
|
|
pir = 2 | ((val & 1 << i) ? 1 << 2 : 0);
|
|
outl(pir, PIR(port));
|
|
udelay(1);
|
|
/* Write direction, bit to write, clock is high */
|
|
pir = 3 | ((val & 1 << i) ? 1 << 2 : 0);
|
|
outl(pir, PIR(port));
|
|
udelay(1);
|
|
/* Write direction, bit to write, clock is low */
|
|
pir = 2 | ((val & 1 << i) ? 1 << 2 : 0);
|
|
outl(pir, PIR(port));
|
|
udelay(1);
|
|
}
|
|
}
|
|
|
|
static void sh_eth_mii_bus_release(int port)
|
|
{
|
|
/* Read direction, clock is low */
|
|
outl(0, PIR(port));
|
|
udelay(1);
|
|
/* Read direction, clock is high */
|
|
outl(1, PIR(port));
|
|
udelay(1);
|
|
/* Read direction, clock is low */
|
|
outl(0, PIR(port));
|
|
udelay(1);
|
|
}
|
|
|
|
static void sh_eth_mii_ind_bus_release(int port)
|
|
{
|
|
/* Read direction, clock is low */
|
|
outl(0, PIR(port));
|
|
udelay(1);
|
|
}
|
|
|
|
static int sh_eth_mii_read_phy_bits(int port, u32 * val, int len)
|
|
{
|
|
int i;
|
|
u32 pir;
|
|
|
|
*val = 0;
|
|
for (i = len - 1; i >= 0; i--) {
|
|
/* Read direction, clock is high */
|
|
outl(1, PIR(port));
|
|
udelay(1);
|
|
/* Read bit */
|
|
pir = inl(PIR(port));
|
|
*val |= (pir & 8) ? 1 << i : 0;
|
|
/* Read direction, clock is low */
|
|
outl(0, PIR(port));
|
|
udelay(1);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define PHY_INIT 0xFFFFFFFF
|
|
#define PHY_READ 0x02
|
|
#define PHY_WRITE 0x01
|
|
/*
|
|
* To read a phy register, mii managements frames are sent to the phy.
|
|
* The frames look like this:
|
|
* pre (32 bits): 0xffff ffff
|
|
* st (2 bits): 01
|
|
* op (2bits): 10: read 01: write
|
|
* phyad (5 bits): xxxxx
|
|
* regad (5 bits): xxxxx
|
|
* ta (Bus release):
|
|
* data (16 bits): read data
|
|
*/
|
|
static u32 sh_eth_mii_read_phy_reg(int port, u8 phy_addr, int reg)
|
|
{
|
|
u32 val;
|
|
|
|
/* Sent mii management frame */
|
|
/* pre */
|
|
sh_eth_mii_write_phy_bits(port, PHY_INIT, 32);
|
|
/* st (start of frame) */
|
|
sh_eth_mii_write_phy_bits(port, 0x1, 2);
|
|
/* op (code) */
|
|
sh_eth_mii_write_phy_bits(port, PHY_READ, 2);
|
|
/* phy address */
|
|
sh_eth_mii_write_phy_bits(port, phy_addr, 5);
|
|
/* Register to read */
|
|
sh_eth_mii_write_phy_bits(port, reg, 5);
|
|
|
|
/* Bus release */
|
|
sh_eth_mii_bus_release(port);
|
|
|
|
/* Read register */
|
|
sh_eth_mii_read_phy_bits(port, &val, 16);
|
|
|
|
return val;
|
|
}
|
|
|
|
/*
|
|
* To write a phy register, mii managements frames are sent to the phy.
|
|
* The frames look like this:
|
|
* pre (32 bits): 0xffff ffff
|
|
* st (2 bits): 01
|
|
* op (2bits): 10: read 01: write
|
|
* phyad (5 bits): xxxxx
|
|
* regad (5 bits): xxxxx
|
|
* ta (2 bits): 10
|
|
* data (16 bits): write data
|
|
* idle (Independent bus release)
|
|
*/
|
|
static void sh_eth_mii_write_phy_reg(int port, u8 phy_addr, int reg, u16 val)
|
|
{
|
|
/* Sent mii management frame */
|
|
/* pre */
|
|
sh_eth_mii_write_phy_bits(port, PHY_INIT, 32);
|
|
/* st (start of frame) */
|
|
sh_eth_mii_write_phy_bits(port, 0x1, 2);
|
|
/* op (code) */
|
|
sh_eth_mii_write_phy_bits(port, PHY_WRITE, 2);
|
|
/* phy address */
|
|
sh_eth_mii_write_phy_bits(port, phy_addr, 5);
|
|
/* Register to read */
|
|
sh_eth_mii_write_phy_bits(port, reg, 5);
|
|
/* ta */
|
|
sh_eth_mii_write_phy_bits(port, PHY_READ, 2);
|
|
/* Write register data */
|
|
sh_eth_mii_write_phy_bits(port, val, 16);
|
|
|
|
/* Independent bus release */
|
|
sh_eth_mii_ind_bus_release(port);
|
|
}
|
|
|
|
void eth_halt(void)
|
|
{
|
|
}
|
|
|
|
int eth_send(volatile void *packet, int len)
|
|
{
|
|
int port = dev->port;
|
|
struct port_info_s *port_info = &dev->port_info[port];
|
|
int timeout;
|
|
int rc = 0;
|
|
|
|
if (!packet || len > 0xffff) {
|
|
printf("eth_send: Invalid argument\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* packet must be a 4 byte boundary */
|
|
if ((int)packet & (4 - 1)) {
|
|
printf("eth_send: packet not 4 byte alligned\n");
|
|
return -EFAULT;
|
|
}
|
|
|
|
/* Update tx descriptor */
|
|
port_info->tx_desc_cur->td2 = ADDR_TO_PHY(packet);
|
|
port_info->tx_desc_cur->td1 = len << 16;
|
|
/* Must preserve the end of descriptor list indication */
|
|
if (port_info->tx_desc_cur->td0 & TD_TDLE)
|
|
port_info->tx_desc_cur->td0 = TD_TACT | TD_TFP | TD_TDLE;
|
|
else
|
|
port_info->tx_desc_cur->td0 = TD_TACT | TD_TFP;
|
|
|
|
/* Restart the transmitter if disabled */
|
|
if (!(inl(EDTRR(port)) & EDTRR_TRNS))
|
|
outl(EDTRR_TRNS, EDTRR(port));
|
|
|
|
/* Wait until packet is transmitted */
|
|
timeout = 1000;
|
|
while (port_info->tx_desc_cur->td0 & TD_TACT && timeout--)
|
|
udelay(100);
|
|
|
|
if (timeout < 0) {
|
|
printf("eth_send: transmit timeout\n");
|
|
rc = -1;
|
|
goto err;
|
|
}
|
|
|
|
err:
|
|
port_info->tx_desc_cur++;
|
|
if (port_info->tx_desc_cur >= port_info->tx_desc_base + NUM_TX_DESC)
|
|
port_info->tx_desc_cur = port_info->tx_desc_base;
|
|
|
|
return rc;
|
|
}
|
|
|
|
int eth_rx(void)
|
|
{
|
|
int port = dev->port;
|
|
struct port_info_s *port_info = &dev->port_info[port];
|
|
int len = 0;
|
|
volatile u8 *packet;
|
|
|
|
/* Check if the rx descriptor is ready */
|
|
if (!(port_info->rx_desc_cur->rd0 & RD_RACT)) {
|
|
/* Check for errors */
|
|
if (!(port_info->rx_desc_cur->rd0 & RD_RFE)) {
|
|
len = port_info->rx_desc_cur->rd1 & 0xffff;
|
|
packet = (volatile u8 *)
|
|
ADDR_TO_P2(port_info->rx_desc_cur->rd2);
|
|
NetReceive(packet, len);
|
|
}
|
|
|
|
/* Make current descriptor available again */
|
|
if (port_info->rx_desc_cur->rd0 & RD_RDLE)
|
|
port_info->rx_desc_cur->rd0 = RD_RACT | RD_RDLE;
|
|
else
|
|
port_info->rx_desc_cur->rd0 = RD_RACT;
|
|
|
|
/* Point to the next descriptor */
|
|
port_info->rx_desc_cur++;
|
|
if (port_info->rx_desc_cur >=
|
|
port_info->rx_desc_base + NUM_RX_DESC)
|
|
port_info->rx_desc_cur = port_info->rx_desc_base;
|
|
}
|
|
|
|
/* Restart the receiver if disabled */
|
|
if (!(inl(EDRRR(port)) & EDRRR_R))
|
|
outl(EDRRR_R, EDRRR(port));
|
|
|
|
return len;
|
|
}
|
|
|
|
#define EDMR_INIT_CNT 1000
|
|
static int sh_eth_reset(struct dev_info_s *dev)
|
|
{
|
|
int port = dev->port;
|
|
int i;
|
|
|
|
/* Start e-dmac transmitter and receiver */
|
|
outl(EDSR_ENALL, EDSR(port));
|
|
|
|
/* Perform a software reset and wait for it to complete */
|
|
outl(EDMR_SRST, EDMR(port));
|
|
for (i = 0; i < EDMR_INIT_CNT; i++) {
|
|
if (!(inl(EDMR(port)) & EDMR_SRST))
|
|
break;
|
|
udelay(1000);
|
|
}
|
|
|
|
if (i == EDMR_INIT_CNT) {
|
|
printf("Error: Software reset timeout\n");
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int sh_eth_tx_desc_init(struct dev_info_s *dev)
|
|
{
|
|
int port = dev->port;
|
|
struct port_info_s *port_info = &dev->port_info[port];
|
|
u32 tmp_addr;
|
|
struct tx_desc_s *cur_tx_desc;
|
|
int i;
|
|
|
|
/* Allocate tx descriptors. They must be TX_DESC_SIZE bytes
|
|
aligned */
|
|
if (!(port_info->tx_desc_malloc = malloc(NUM_TX_DESC *
|
|
sizeof(struct tx_desc_s) +
|
|
TX_DESC_SIZE - 1))) {
|
|
printf("Error: malloc failed\n");
|
|
return -ENOMEM;
|
|
}
|
|
tmp_addr = (u32) (((int)port_info->tx_desc_malloc + TX_DESC_SIZE - 1) &
|
|
~(TX_DESC_SIZE - 1));
|
|
/* Make sure we use a P2 address (non-cacheable) */
|
|
port_info->tx_desc_base = (struct tx_desc_s *)ADDR_TO_P2(tmp_addr);
|
|
|
|
port_info->tx_desc_cur = port_info->tx_desc_base;
|
|
|
|
/* Initialize all descriptors */
|
|
for (cur_tx_desc = port_info->tx_desc_base, i = 0; i < NUM_TX_DESC;
|
|
cur_tx_desc++, i++) {
|
|
cur_tx_desc->td0 = 0x00;
|
|
cur_tx_desc->td1 = 0x00;
|
|
cur_tx_desc->td2 = 0x00;
|
|
}
|
|
|
|
/* Mark the end of the descriptors */
|
|
cur_tx_desc--;
|
|
cur_tx_desc->td0 |= TD_TDLE;
|
|
|
|
/* Point the controller to the tx descriptor list. Must use physical
|
|
addresses */
|
|
outl(ADDR_TO_PHY(port_info->tx_desc_base), TDLAR(port));
|
|
outl(ADDR_TO_PHY(port_info->tx_desc_base), TDFAR(port));
|
|
outl(ADDR_TO_PHY(cur_tx_desc), TDFXR(port));
|
|
outl(0x01, TDFFR(port));/* Last discriptor bit */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sh_eth_rx_desc_init(struct dev_info_s *dev)
|
|
{
|
|
int port = dev->port;
|
|
struct port_info_s *port_info = &dev->port_info[port];
|
|
u32 tmp_addr;
|
|
struct rx_desc_s *cur_rx_desc;
|
|
u8 *rx_buf;
|
|
int i;
|
|
|
|
/* Allocate rx descriptors. They must be RX_DESC_SIZE bytes
|
|
aligned */
|
|
if (!(port_info->rx_desc_malloc = malloc(NUM_RX_DESC *
|
|
sizeof(struct rx_desc_s) +
|
|
RX_DESC_SIZE - 1))) {
|
|
printf("Error: malloc failed\n");
|
|
return -ENOMEM;
|
|
}
|
|
tmp_addr = (u32) (((int)port_info->rx_desc_malloc + RX_DESC_SIZE - 1) &
|
|
~(RX_DESC_SIZE - 1));
|
|
/* Make sure we use a P2 address (non-cacheable) */
|
|
port_info->rx_desc_base = (struct rx_desc_s *)ADDR_TO_P2(tmp_addr);
|
|
|
|
port_info->rx_desc_cur = port_info->rx_desc_base;
|
|
|
|
/* Allocate rx data buffers. They must be 32 bytes aligned and in
|
|
P2 area */
|
|
if (!(port_info->rx_buf_malloc = malloc(NUM_RX_DESC * MAX_BUF_SIZE +
|
|
31))) {
|
|
printf("Error: malloc failed\n");
|
|
free(port_info->rx_desc_malloc);
|
|
port_info->rx_desc_malloc = NULL;
|
|
return -ENOMEM;
|
|
}
|
|
tmp_addr = (u32)(((int)port_info->rx_buf_malloc + (32 - 1)) &
|
|
~(32 - 1));
|
|
port_info->rx_buf_base = (u8 *)ADDR_TO_P2(tmp_addr);
|
|
|
|
/* Initialize all descriptors */
|
|
for (cur_rx_desc = port_info->rx_desc_base,
|
|
rx_buf = port_info->rx_buf_base, i = 0;
|
|
i < NUM_RX_DESC; cur_rx_desc++, rx_buf += MAX_BUF_SIZE, i++) {
|
|
cur_rx_desc->rd0 = RD_RACT;
|
|
cur_rx_desc->rd1 = MAX_BUF_SIZE << 16;
|
|
cur_rx_desc->rd2 = (u32) ADDR_TO_PHY(rx_buf);
|
|
}
|
|
|
|
/* Mark the end of the descriptors */
|
|
cur_rx_desc--;
|
|
cur_rx_desc->rd0 |= RD_RDLE;
|
|
|
|
/* Point the controller to the rx descriptor list */
|
|
outl(ADDR_TO_PHY(port_info->rx_desc_base), RDLAR(port));
|
|
outl(ADDR_TO_PHY(port_info->rx_desc_base), RDFAR(port));
|
|
outl(ADDR_TO_PHY(cur_rx_desc), RDFXR(port));
|
|
outl(RDFFR_RDLF, RDFFR(port));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sh_eth_desc_free(struct dev_info_s *dev)
|
|
{
|
|
int port = dev->port;
|
|
struct port_info_s *port_info = &dev->port_info[port];
|
|
|
|
if (port_info->tx_desc_malloc) {
|
|
free(port_info->tx_desc_malloc);
|
|
port_info->tx_desc_malloc = NULL;
|
|
}
|
|
|
|
if (port_info->rx_desc_malloc) {
|
|
free(port_info->rx_desc_malloc);
|
|
port_info->rx_desc_malloc = NULL;
|
|
}
|
|
|
|
if (port_info->rx_buf_malloc) {
|
|
free(port_info->rx_buf_malloc);
|
|
port_info->rx_buf_malloc = NULL;
|
|
}
|
|
}
|
|
|
|
static int sh_eth_desc_init(struct dev_info_s *dev)
|
|
{
|
|
int rc;
|
|
|
|
if ((rc = sh_eth_tx_desc_init(dev)) || (rc = sh_eth_rx_desc_init(dev))) {
|
|
sh_eth_desc_free(dev);
|
|
return rc;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sh_eth_phy_config(struct dev_info_s *dev)
|
|
{
|
|
int port = dev->port;
|
|
struct port_info_s *port_info = &dev->port_info[port];
|
|
int timeout;
|
|
u32 val;
|
|
/* Reset phy */
|
|
sh_eth_mii_write_phy_reg(port, port_info->phy_addr, PHY_CTRL, PHY_C_RESET);
|
|
timeout = 10;
|
|
while (timeout--) {
|
|
val = sh_eth_mii_read_phy_reg(port, port_info->phy_addr, PHY_CTRL);
|
|
if (!(val & PHY_C_RESET))
|
|
break;
|
|
udelay(50000);
|
|
}
|
|
if (timeout < 0) {
|
|
printf("%s phy reset timeout\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
/* Advertise 100/10 baseT full/half duplex */
|
|
sh_eth_mii_write_phy_reg(port, port_info->phy_addr, PHY_ANA,
|
|
(PHY_A_FDX|PHY_A_HDX|PHY_A_10FDX|PHY_A_10HDX|PHY_A_EXT));
|
|
/* Autonegotiation, normal operation, full duplex, enable tx */
|
|
sh_eth_mii_write_phy_reg(port, port_info->phy_addr, PHY_CTRL,
|
|
(PHY_C_ANEGEN|PHY_C_RANEG));
|
|
/* Wait for autonegotiation to complete */
|
|
timeout = 100;
|
|
while (timeout--) {
|
|
val = sh_eth_mii_read_phy_reg(port, port_info->phy_addr, 1);
|
|
if (val & PHY_S_ANEGC)
|
|
break;
|
|
udelay(50000);
|
|
}
|
|
if (timeout < 0) {
|
|
printf("sh_eth_phy_config() phy auto-negotiation failed\n");
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sh_eth_config(struct dev_info_s *dev, bd_t * bd)
|
|
{
|
|
int port = dev->port;
|
|
struct port_info_s *port_info = &dev->port_info[port];
|
|
u32 val;
|
|
u32 phy_status;
|
|
int rc;
|
|
|
|
/* Configure e-dmac registers */
|
|
outl((inl(EDMR(port)) & ~EMDR_DESC_R) | EDMR_EL, EDMR(port));
|
|
outl(0, EESIPR(port));
|
|
outl(0, TRSCER(port));
|
|
outl(0, TFTR(port));
|
|
outl((FIFO_SIZE_T | FIFO_SIZE_R), FDR(port));
|
|
outl(RMCR_RST, RMCR(port));
|
|
outl(0, RPADIR(port));
|
|
outl((FIFO_F_D_RFF | FIFO_F_D_RFD), FCFTR(port));
|
|
|
|
/* Configure e-mac registers */
|
|
outl(0, ECSIPR(port));
|
|
|
|
/* Set Mac address */
|
|
val = bd->bi_enetaddr[0] << 24 | bd->bi_enetaddr[1] << 16 |
|
|
bd->bi_enetaddr[2] << 8 | bd->bi_enetaddr[3];
|
|
outl(val, MAHR(port));
|
|
|
|
val = bd->bi_enetaddr[4] << 8 | bd->bi_enetaddr[5];
|
|
outl(val, MALR(port));
|
|
|
|
outl(RFLR_RFL_MIN, RFLR(port));
|
|
outl(0, PIPR(port));
|
|
outl(APR_AP, APR(port));
|
|
outl(MPR_MP, MPR(port));
|
|
outl(TPAUSER_TPAUSE, TPAUSER(port));
|
|
|
|
/* Configure phy */
|
|
if ((rc = sh_eth_phy_config(dev)))
|
|
return rc;
|
|
|
|
/* Read phy status to finish configuring the e-mac */
|
|
phy_status = sh_eth_mii_read_phy_reg(dev->port,
|
|
dev->port_info[dev->port].phy_addr,
|
|
1);
|
|
|
|
/* Set the transfer speed */
|
|
if (phy_status & (PHY_S_100X_F|PHY_S_100X_H)) {
|
|
printf("100Base/");
|
|
outl(GECMR_100B, GECMR(port));
|
|
} else {
|
|
printf("10Base/");
|
|
outl(GECMR_10B, GECMR(port));
|
|
}
|
|
|
|
/* Check if full duplex mode is supported by the phy */
|
|
if (phy_status & (PHY_S_100X_F|PHY_S_10T_F)) {
|
|
printf("Full\n");
|
|
outl((ECMR_CHG_DM|ECMR_RE|ECMR_TE|ECMR_DM), ECMR(port));
|
|
} else {
|
|
printf("Half\n");
|
|
outl((ECMR_CHG_DM|ECMR_RE|ECMR_TE), ECMR(port));
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int sh_eth_start(struct dev_info_s *dev)
|
|
{
|
|
/*
|
|
* Enable the e-dmac receiver only. The transmitter will be enabled when
|
|
* we have something to transmit
|
|
*/
|
|
outl(EDRRR_R, EDRRR(dev->port));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sh_eth_get_mac(bd_t *bd)
|
|
{
|
|
char *s, *e;
|
|
int i;
|
|
|
|
s = getenv("ethaddr");
|
|
if (s != NULL) {
|
|
for (i = 0; i < 6; ++i) {
|
|
bd->bi_enetaddr[i] = s ? simple_strtoul(s, &e, 16) : 0;
|
|
if (s)
|
|
s = (*e) ? e + 1 : e;
|
|
}
|
|
} else {
|
|
puts("Please set MAC address\n");
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int eth_init(bd_t *bd)
|
|
{
|
|
int rc;
|
|
/* Allocate main device information structure */
|
|
if (!(dev = malloc(sizeof(*dev)))) {
|
|
printf("eth_init: malloc failed\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memset(dev, 0, sizeof(*dev));
|
|
|
|
dev->port = CONFIG_SH_ETHER_USE_PORT;
|
|
dev->port_info[dev->port].phy_addr = CONFIG_SH_ETHER_PHY_ADDR;
|
|
|
|
sh_eth_get_mac(bd);
|
|
|
|
if ((rc = sh_eth_reset(dev)) || (rc = sh_eth_desc_init(dev)))
|
|
goto err;
|
|
|
|
if ((rc = sh_eth_config(dev, bd)) || (rc = sh_eth_start(dev)))
|
|
goto err_desc;
|
|
|
|
return 0;
|
|
|
|
err_desc:
|
|
sh_eth_desc_free(dev);
|
|
err:
|
|
free(dev);
|
|
printf("eth_init: Failed\n");
|
|
return rc;
|
|
}
|