mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-06-09 23:36:03 +09:00
13d1143ffb
This allows DDR configuration to be deferred to the final U-Boot image, which is able to make use of SPD data. The SPL itself cannot use SPD due to code size constraints. It previously used fixed register values for DDR configuration, and those values did not work on the p2020rdb-pca board I tested with. It's possible that different revisions of the board require different settings. Using SPD eliminates that problem. Signed-off-by: Scott Wood <scottwood@freescale.com> Cc: Andy Fleming <afleming@freescale.com>
137 lines
4.0 KiB
C
137 lines
4.0 KiB
C
/*
|
|
* Copyright 2011 Freescale Semiconductor, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
*
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <ns16550.h>
|
|
#include <asm/io.h>
|
|
#include <nand.h>
|
|
#include <linux/compiler.h>
|
|
#include <asm/fsl_law.h>
|
|
#include <asm/fsl_ddr_sdram.h>
|
|
#include <asm/global_data.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#ifndef CONFIG_SYS_INIT_L2_ADDR
|
|
/*
|
|
* Fixed sdram init -- doesn't use serial presence detect.
|
|
*/
|
|
static void sdram_init(void)
|
|
{
|
|
ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR;
|
|
|
|
__raw_writel(CONFIG_SYS_DDR_CS0_BNDS, &ddr->cs0_bnds);
|
|
__raw_writel(CONFIG_SYS_DDR_CS0_CONFIG, &ddr->cs0_config);
|
|
#if CONFIG_CHIP_SELECTS_PER_CTRL > 1
|
|
__raw_writel(CONFIG_SYS_DDR_CS1_BNDS, &ddr->cs1_bnds);
|
|
__raw_writel(CONFIG_SYS_DDR_CS1_CONFIG, &ddr->cs1_config);
|
|
#endif
|
|
__raw_writel(CONFIG_SYS_DDR_TIMING_3, &ddr->timing_cfg_3);
|
|
__raw_writel(CONFIG_SYS_DDR_TIMING_0, &ddr->timing_cfg_0);
|
|
__raw_writel(CONFIG_SYS_DDR_TIMING_1, &ddr->timing_cfg_1);
|
|
__raw_writel(CONFIG_SYS_DDR_TIMING_2, &ddr->timing_cfg_2);
|
|
|
|
__raw_writel(CONFIG_SYS_DDR_CONTROL_2, &ddr->sdram_cfg_2);
|
|
__raw_writel(CONFIG_SYS_DDR_MODE_1, &ddr->sdram_mode);
|
|
__raw_writel(CONFIG_SYS_DDR_MODE_2, &ddr->sdram_mode_2);
|
|
|
|
__raw_writel(CONFIG_SYS_DDR_INTERVAL, &ddr->sdram_interval);
|
|
__raw_writel(CONFIG_SYS_DDR_DATA_INIT, &ddr->sdram_data_init);
|
|
__raw_writel(CONFIG_SYS_DDR_CLK_CTRL, &ddr->sdram_clk_cntl);
|
|
|
|
__raw_writel(CONFIG_SYS_DDR_TIMING_4, &ddr->timing_cfg_4);
|
|
__raw_writel(CONFIG_SYS_DDR_TIMING_5, &ddr->timing_cfg_5);
|
|
__raw_writel(CONFIG_SYS_DDR_ZQ_CONTROL, &ddr->ddr_zq_cntl);
|
|
__raw_writel(CONFIG_SYS_DDR_WRLVL_CONTROL, &ddr->ddr_wrlvl_cntl);
|
|
|
|
/* Set, but do not enable the memory */
|
|
__raw_writel(CONFIG_SYS_DDR_CONTROL & ~SDRAM_CFG_MEM_EN, &ddr->sdram_cfg);
|
|
|
|
asm volatile("sync;isync");
|
|
udelay(500);
|
|
|
|
/* Let the controller go */
|
|
out_be32(&ddr->sdram_cfg, in_be32(&ddr->sdram_cfg) | SDRAM_CFG_MEM_EN);
|
|
|
|
set_next_law(0, CONFIG_SYS_SDRAM_SIZE_LAW, LAW_TRGT_IF_DDR_1);
|
|
}
|
|
#endif
|
|
|
|
void board_init_f(ulong bootflag)
|
|
{
|
|
u32 plat_ratio;
|
|
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
|
|
#ifndef CONFIG_QE
|
|
ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
|
|
#endif
|
|
|
|
/* initialize selected port with appropriate baud rate */
|
|
plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
|
|
plat_ratio >>= 1;
|
|
gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
|
|
|
|
NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
|
|
gd->bus_clk / 16 / CONFIG_BAUDRATE);
|
|
|
|
puts("\nNAND boot... ");
|
|
|
|
#ifndef CONFIG_QE
|
|
/* init DDR3 reset signal */
|
|
__raw_writel(0x02000000, &pgpio->gpdir);
|
|
__raw_writel(0x00200000, &pgpio->gpodr);
|
|
__raw_writel(0x00000000, &pgpio->gpdat);
|
|
udelay(1000);
|
|
__raw_writel(0x00200000, &pgpio->gpdat);
|
|
udelay(1000);
|
|
__raw_writel(0x00000000, &pgpio->gpdir);
|
|
#endif
|
|
|
|
#ifndef CONFIG_SYS_INIT_L2_ADDR
|
|
/* Initialize the DDR3 */
|
|
sdram_init();
|
|
#endif
|
|
|
|
/* copy code to RAM and jump to it - this should not return */
|
|
/* NOTE - code has to be copied out of NAND buffer before
|
|
* other blocks can be read.
|
|
*/
|
|
relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE);
|
|
}
|
|
|
|
void board_init_r(gd_t *gd, ulong dest_addr)
|
|
{
|
|
nand_boot();
|
|
}
|
|
|
|
void putc(char c)
|
|
{
|
|
if (c == '\n')
|
|
NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r');
|
|
|
|
NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c);
|
|
}
|
|
|
|
void puts(const char *str)
|
|
{
|
|
while (*str)
|
|
putc(*str++);
|
|
}
|