mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 00:48:52 +09:00
![Wolfgang Denk](/assets/img/avatar_default.png)
CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not being able to use "sizeof(struct global_data)" in assembler files. Recent experience has shown that manual synchronization is not reliable enough. This patch renames CONFIG_SYS_GBL_DATA_SIZE into GENERATED_GBL_DATA_SIZE which gets automatically generated by the asm-offsets tool. In the result, all definitions of this value can be deleted from the board config files. We have to make sure that all files that reference such data include the new <asm-offsets.h> file. No other changes have been done yet, but it is obvious that similar changes / simplifications can be done for other, related macro definitions as well. Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Kumar Gala <galak@kernel.crashing.org>
749 lines
26 KiB
C
749 lines
26 KiB
C
/*
|
|
* (C) Copyright 2000
|
|
* Murray Jensen <Murray.Jensen@cmst.csiro.au>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
/*
|
|
* Config header file for Hymod board
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
* (easy to change)
|
|
*/
|
|
|
|
#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */
|
|
#define CONFIG_HYMOD 1 /* ...on a Hymod board */
|
|
#define CONFIG_CPM2 1 /* Has a CPM2 */
|
|
|
|
#define CONFIG_SYS_TEXT_BASE 0x40000000
|
|
|
|
#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */
|
|
|
|
#define CONFIG_BOARD_POSTCLK_INIT /* have board_postclk_init() function */
|
|
|
|
/*
|
|
* select serial console configuration
|
|
*
|
|
* if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
|
|
* CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
|
|
* for SCC).
|
|
*
|
|
* if CONFIG_CONS_NONE is defined, then the serial console routines must
|
|
* defined elsewhere (for example, on the cogent platform, there are serial
|
|
* ports on the motherboard which are used for the serial console - see
|
|
* cogent/cma101/serial.[ch]).
|
|
*/
|
|
#undef CONFIG_CONS_ON_SMC /* define if console on SMC */
|
|
#define CONFIG_CONS_ON_SCC /* define if console on SCC */
|
|
#undef CONFIG_CONS_NONE /* define if console on something else*/
|
|
#define CONFIG_CONS_INDEX 1 /* which serial channel for console */
|
|
#define CONFIG_CONS_USE_EXTC /* SMC/SCC use ext clock not brg_clk */
|
|
#define CONFIG_CONS_EXTC_RATE 3686400 /* SMC/SCC ext clk rate in Hz */
|
|
#define CONFIG_CONS_EXTC_PINSEL 0 /* pin select 0=CLK3/CLK9,1=CLK5/CLK15*/
|
|
|
|
/*
|
|
* select ethernet configuration
|
|
*
|
|
* if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
|
|
* CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
|
|
* for FCC)
|
|
*
|
|
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
|
|
* defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
|
|
*/
|
|
#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */
|
|
#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */
|
|
#undef CONFIG_ETHER_NONE /* define if ether on something else */
|
|
#define CONFIG_ETHER_INDEX 1 /* which channel for ether */
|
|
#define CONFIG_ETHER_LOOPBACK_TEST /* add ether external loopback test */
|
|
|
|
#ifdef CONFIG_ETHER_ON_FCC
|
|
|
|
#if (CONFIG_ETHER_INDEX == 1)
|
|
|
|
/*
|
|
* - Rx-CLK is CLK10
|
|
* - Tx-CLK is CLK11
|
|
* - RAM for BD/Buffers is on the 60x Bus (see 28-13)
|
|
* - Enable Full Duplex in FSMR
|
|
*/
|
|
# define CONFIG_SYS_CMXFCR_MASK (CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK)
|
|
# define CONFIG_SYS_CMXFCR_VALUE (CMXFCR_RF1CS_CLK10|CMXFCR_TF1CS_CLK11)
|
|
# define CONFIG_SYS_CPMFCR_RAMTYPE 0
|
|
# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB)
|
|
|
|
# define MDIO_PORT 0 /* Port A */
|
|
# define MDIO_DECLARE volatile ioport_t *iop = ioport_addr ( \
|
|
(immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
|
|
# define MDC_DECLARE MDIO_DECLARE
|
|
|
|
# define MDIO_DATA_PINMASK 0x00040000 /* Pin 13 */
|
|
# define MDIO_CLCK_PINMASK 0x00080000 /* Pin 12 */
|
|
|
|
#elif (CONFIG_ETHER_INDEX == 2)
|
|
|
|
/*
|
|
* - Rx-CLK is CLK13
|
|
* - Tx-CLK is CLK14
|
|
* - RAM for BD/Buffers is on the 60x Bus (see 28-13)
|
|
* - Enable Full Duplex in FSMR
|
|
*/
|
|
# define CONFIG_SYS_CMXFCR_MASK (CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
|
|
# define CONFIG_SYS_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
|
|
# define CONFIG_SYS_CPMFCR_RAMTYPE 0
|
|
# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB)
|
|
|
|
# define MDIO_PORT 0 /* Port A */
|
|
# define MDIO_DECLARE volatile ioport_t *iop = ioport_addr ( \
|
|
(immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
|
|
# define MDC_DECLARE MDIO_DECLARE
|
|
|
|
# define MDIO_DATA_PINMASK 0x00000040 /* Pin 25 */
|
|
# define MDIO_CLCK_PINMASK 0x00000080 /* Pin 24 */
|
|
|
|
#elif (CONFIG_ETHER_INDEX == 3)
|
|
|
|
/*
|
|
* - Rx-CLK is CLK15
|
|
* - Tx-CLK is CLK16
|
|
* - RAM for BD/Buffers is on the 60x Bus (see 28-13)
|
|
* - Enable Full Duplex in FSMR
|
|
*/
|
|
# define CONFIG_SYS_CMXFCR_MASK (CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK)
|
|
# define CONFIG_SYS_CMXFCR_VALUE (CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16)
|
|
# define CONFIG_SYS_CPMFCR_RAMTYPE 0
|
|
# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB)
|
|
|
|
# define MDIO_PORT 0 /* Port A */
|
|
# define MDIO_DECLARE volatile ioport_t *iop = ioport_addr ( \
|
|
(immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
|
|
# define MDC_DECLARE MDIO_DECLARE
|
|
|
|
# define MDIO_DATA_PINMASK 0x00000100 /* Pin 23 */
|
|
# define MDIO_CLCK_PINMASK 0x00000200 /* Pin 22 */
|
|
|
|
#endif /* CONFIG_ETHER_INDEX */
|
|
|
|
#define CONFIG_MII /* MII PHY management */
|
|
#define CONFIG_BITBANGMII /* bit-bang MII PHY management */
|
|
|
|
#define MDIO_ACTIVE (iop->pdir |= MDIO_DATA_PINMASK)
|
|
#define MDIO_TRISTATE (iop->pdir &= ~MDIO_DATA_PINMASK)
|
|
#define MDIO_READ ((iop->pdat & MDIO_DATA_PINMASK) != 0)
|
|
|
|
#define MDIO(bit) if(bit) iop->pdat |= MDIO_DATA_PINMASK; \
|
|
else iop->pdat &= ~MDIO_DATA_PINMASK
|
|
|
|
#define MDC(bit) if(bit) iop->pdat |= MDIO_CLCK_PINMASK; \
|
|
else iop->pdat &= ~MDIO_CLCK_PINMASK
|
|
|
|
#define MIIDELAY udelay(1)
|
|
|
|
#endif /* CONFIG_ETHER_ON_FCC */
|
|
|
|
|
|
/* other options */
|
|
#define CONFIG_HARD_I2C 1 /* To enable I2C hardware support */
|
|
#define CONFIG_DTT_ADM1021 1 /* ADM1021 temp sensor support */
|
|
|
|
/* system clock rate (CLKIN) - equal to the 60x and local bus speed */
|
|
#ifdef DEBUG
|
|
#define CONFIG_8260_CLKIN 33333333 /* in Hz */
|
|
#else
|
|
#define CONFIG_8260_CLKIN 66666666 /* in Hz */
|
|
#endif
|
|
|
|
#if defined(CONFIG_CONS_USE_EXTC)
|
|
#define CONFIG_BAUDRATE 115200
|
|
#else
|
|
#define CONFIG_BAUDRATE 9600
|
|
#endif
|
|
|
|
/* default ip addresses - these will be overridden */
|
|
#define CONFIG_IPADDR 192.168.1.1 /* hymod "boot" address */
|
|
#define CONFIG_SERVERIP 192.168.1.254 /* hymod "server" address */
|
|
|
|
#define CONFIG_LAST_STAGE_INIT
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_ASKENV
|
|
#define CONFIG_CMD_BSP
|
|
#define CONFIG_CMD_CACHE
|
|
#define CONFIG_CMD_CDP
|
|
#define CONFIG_CMD_DATE
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_DIAG
|
|
#define CONFIG_CMD_DTT
|
|
#define CONFIG_CMD_EEPROM
|
|
#define CONFIG_CMD_ELF
|
|
#define CONFIG_CMD_FAT
|
|
#define CONFIG_CMD_I2C
|
|
#define CONFIG_CMD_IMMAP
|
|
#define CONFIG_CMD_IRQ
|
|
#define CONFIG_CMD_KGDB
|
|
#define CONFIG_CMD_MII
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_PORTIO
|
|
#define CONFIG_CMD_REGINFO
|
|
#define CONFIG_CMD_SAVES
|
|
#define CONFIG_CMD_SDRAM
|
|
#define CONFIG_CMD_SNTP
|
|
|
|
#undef CONFIG_CMD_FPGA
|
|
#undef CONFIG_CMD_XIMG
|
|
|
|
#ifdef DEBUG
|
|
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
|
|
#else
|
|
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
|
|
#define CONFIG_BOOT_RETRY_TIME 30 /* retry autoboot after 30 secs */
|
|
#define CONFIG_BOOT_RETRY_MIN 1 /* can go down to 1 second timeout */
|
|
/* Be selective on what keys can delay or stop the autoboot process
|
|
* To stop use: " "
|
|
*/
|
|
#define CONFIG_AUTOBOOT_KEYED
|
|
#define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, " \
|
|
"press <SPACE> to stop\n", bootdelay
|
|
#define CONFIG_AUTOBOOT_STOP_STR " "
|
|
#undef CONFIG_AUTOBOOT_DELAY_STR
|
|
#define DEBUG_BOOTKEYS 0
|
|
#endif
|
|
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
|
|
#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
|
|
#undef CONFIG_KGDB_NONE /* define if kgdb on something else */
|
|
#define CONFIG_KGDB_INDEX 2 /* which serial channel for kgdb */
|
|
#define CONFIG_KGDB_USE_EXTC /* SMC/SCC use ext clock not brg_clk */
|
|
#define CONFIG_KGDB_EXTC_RATE 3686400 /* serial ext clk rate in Hz */
|
|
#define CONFIG_KGDB_EXTC_PINSEL 0 /* pin select 0=CLK3/CLK9,1=CLK5/CLK15*/
|
|
# if defined(CONFIG_KGDB_USE_EXTC)
|
|
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */
|
|
# else
|
|
#define CONFIG_KGDB_BAUDRATE 9600 /* speed to run kgdb serial port at */
|
|
# endif
|
|
#endif
|
|
|
|
#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
|
|
|
|
#define CONFIG_RTC_PCF8563 /* use Philips PCF8563 RTC */
|
|
|
|
/*
|
|
* Hymod specific configurable options
|
|
*/
|
|
#undef CONFIG_SYS_HYMOD_DBLEDS /* walk mezz board LEDs */
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
#else
|
|
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#endif
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
|
|
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */
|
|
#define CONFIG_SYS_MEMTEST_END 0x03c00000 /* 4 ... 60 MB in DRAM */
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
|
|
|
|
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
|
|
|
|
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
|
|
|
|
#define CONFIG_SYS_I2C_SPEED 50000
|
|
#define CONFIG_SYS_I2C_SLAVE 0x7e
|
|
|
|
/* these are for the ST M24C02 2kbit serial i2c eeprom */
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* base address */
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */
|
|
/* mask of address bits that overflow into the "EEPROM chip address" */
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07
|
|
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 16 byte write page size */
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
|
|
|
|
#define CONFIG_SYS_I2C_MULTI_EEPROMS 1 /* hymod has two eeproms */
|
|
|
|
#define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* philips PCF8563 RTC address */
|
|
|
|
/*
|
|
* standard dtt sensor configuration - bottom bit will determine local or
|
|
* remote sensor of the ADM1021, the rest determines index into
|
|
* CONFIG_SYS_DTT_ADM1021 array below.
|
|
*
|
|
* On HYMOD board, the remote sensor should be connected to the MPC8260
|
|
* temperature diode thingy, but an errata said this didn't work and
|
|
* should be disabled - so it isn't connected.
|
|
*/
|
|
#if 0
|
|
#define CONFIG_DTT_SENSORS { 0, 1 }
|
|
#else
|
|
#define CONFIG_DTT_SENSORS { 0 }
|
|
#endif
|
|
|
|
/*
|
|
* ADM1021 temp sensor configuration (see dtt/adm1021.c for details).
|
|
* there will be one entry in this array for each two (dummy) sensors in
|
|
* CONFIG_DTT_SENSORS.
|
|
*
|
|
* For HYMOD board:
|
|
* - only one ADM1021
|
|
* - i2c addr 0x2a (both ADD0 and ADD1 are N/C)
|
|
* - conversion rate 0x02 = 0.25 conversions/second
|
|
* - ALERT ouput disabled
|
|
* - local temp sensor enabled, min set to 0 deg, max set to 85 deg
|
|
* - remote temp sensor disabled (see comment for CONFIG_DTT_SENSORS above)
|
|
*/
|
|
#define CONFIG_SYS_DTT_ADM1021 { { 0x2a, 0x02, 0, 1, 0, 85, 0, } }
|
|
|
|
/*
|
|
* Low Level Configuration Settings
|
|
* (address mappings, register initial values, etc.)
|
|
* You should know what you are doing if you make changes here.
|
|
*/
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Hard Reset Configuration Words
|
|
*
|
|
* if you change bits in the HRCW, you must also change the CONFIG_SYS_*
|
|
* defines for the various registers affected by the HRCW e.g. changing
|
|
* HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR.
|
|
*/
|
|
#ifdef DEBUG
|
|
#define CONFIG_SYS_HRCW_MASTER (HRCW_BPS11|HRCW_CIP|HRCW_L2CPC01|HRCW_DPPC10|\
|
|
HRCW_ISB100|HRCW_BMS|HRCW_MMR11|HRCW_APPC10|\
|
|
HRCW_MODCK_H0010)
|
|
#else
|
|
#define CONFIG_SYS_HRCW_MASTER (HRCW_BPS11|HRCW_CIP|HRCW_L2CPC01|HRCW_DPPC10|\
|
|
HRCW_ISB100|HRCW_BMS|HRCW_MMR11|HRCW_APPC10|\
|
|
HRCW_MODCK_H0101)
|
|
#endif
|
|
/* no slaves so just duplicate the master hrcw */
|
|
#define CONFIG_SYS_HRCW_SLAVE1 CONFIG_SYS_HRCW_MASTER
|
|
#define CONFIG_SYS_HRCW_SLAVE2 CONFIG_SYS_HRCW_MASTER
|
|
#define CONFIG_SYS_HRCW_SLAVE3 CONFIG_SYS_HRCW_MASTER
|
|
#define CONFIG_SYS_HRCW_SLAVE4 CONFIG_SYS_HRCW_MASTER
|
|
#define CONFIG_SYS_HRCW_SLAVE5 CONFIG_SYS_HRCW_MASTER
|
|
#define CONFIG_SYS_HRCW_SLAVE6 CONFIG_SYS_HRCW_MASTER
|
|
#define CONFIG_SYS_HRCW_SLAVE7 CONFIG_SYS_HRCW_MASTER
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Internal Memory Mapped Register
|
|
*/
|
|
#define CONFIG_SYS_IMMR 0xF0000000
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Definitions for initial stack pointer and data area (in DPRAM)
|
|
*/
|
|
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
|
|
#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */
|
|
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Start addresses for the final memory configuration
|
|
* (Set up by the startup code)
|
|
* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
|
|
*/
|
|
#define CONFIG_SYS_SDRAM_BASE 0x00000000
|
|
#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_TEXT_BASE
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
|
|
#define CONFIG_SYS_FPGA_BASE 0x80000000
|
|
/*
|
|
* unfortunately, CONFIG_SYS_MONITOR_LEN must include the
|
|
* (very large i.e. 256kB) environment flash sector
|
|
*/
|
|
#define CONFIG_SYS_MONITOR_LEN (512 << 10) /* Reserve 512 kB for Monitor*/
|
|
#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc()*/
|
|
|
|
/*
|
|
* For booting Linux, the board info and command line data
|
|
* have to be in the first 8 MB of memory, since this is
|
|
* the maximum mapped by the Linux kernel during initialization.
|
|
*/
|
|
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Mem map for Linux*/
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* FLASH organization
|
|
*/
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max num of memory banks */
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max num of sects on one chip */
|
|
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Flash Erase Timeout (in ms) */
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
|
|
|
|
#define CONFIG_ENV_IS_IN_FLASH 1
|
|
#define CONFIG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */
|
|
#define CONFIG_ENV_SECT_SIZE 0x40000 /* see README - env sect real size */
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN-CONFIG_ENV_SECT_SIZE)
|
|
#define CONFIG_SYS_USE_PPCENV /* Environment embedded in sect .ppcenv */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Cache Configuration
|
|
*/
|
|
#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPU */
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value*/
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* HIDx - Hardware Implementation-dependent Registers 2-11
|
|
*-----------------------------------------------------------------------
|
|
* HID0 also contains cache control - initially enable both caches and
|
|
* invalidate contents, then the final state leaves only the instruction
|
|
* cache enabled. Note that Power-On and Hard reset invalidate the caches,
|
|
* but Soft reset does not.
|
|
*
|
|
* HID1 has only read-only information - nothing to set.
|
|
*/
|
|
#define CONFIG_SYS_HID0_INIT (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\
|
|
HID0_IFEM|HID0_ABE)
|
|
#ifdef DEBUG
|
|
#define CONFIG_SYS_HID0_FINAL 0
|
|
#else
|
|
#define CONFIG_SYS_HID0_FINAL (HID0_ICE|HID0_IFEM|HID0_ABE)
|
|
#endif
|
|
#define CONFIG_SYS_HID2 0
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* RMR - Reset Mode Register 5-5
|
|
*-----------------------------------------------------------------------
|
|
* turn on Checkstop Reset Enable
|
|
*/
|
|
#ifdef DEBUG
|
|
#define CONFIG_SYS_RMR 0
|
|
#else
|
|
#define CONFIG_SYS_RMR RMR_CSRE
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* BCR - Bus Configuration 4-25
|
|
*-----------------------------------------------------------------------
|
|
*/
|
|
#define CONFIG_SYS_BCR (BCR_ETM)
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* SIUMCR - SIU Module Configuration 4-31
|
|
*-----------------------------------------------------------------------
|
|
*/
|
|
#define CONFIG_SYS_SIUMCR (SIUMCR_DPPC10|SIUMCR_L2CPC01|\
|
|
SIUMCR_APPC10|SIUMCR_MMR11)
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* SYPCR - System Protection Control 4-35
|
|
* SYPCR can only be written once after reset!
|
|
*-----------------------------------------------------------------------
|
|
* Watchdog & Bus Monitor Timer max, 60x & Local Bus Monitor enable
|
|
*/
|
|
#if defined(CONFIG_WATCHDOG)
|
|
#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
|
|
SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
|
|
#else
|
|
#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
|
|
SYPCR_SWRI|SYPCR_SWP)
|
|
#endif /* CONFIG_WATCHDOG */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* TMCNTSC - Time Counter Status and Control 4-40
|
|
*-----------------------------------------------------------------------
|
|
* Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
|
|
* and enable Time Counter
|
|
*/
|
|
#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* PISCR - Periodic Interrupt Status and Control 4-42
|
|
*-----------------------------------------------------------------------
|
|
* Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
|
|
* Periodic timer
|
|
*/
|
|
#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE)
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* SCCR - System Clock Control 9-8
|
|
*-----------------------------------------------------------------------
|
|
* Ensure DFBRG is Divide by 16
|
|
*/
|
|
#define CONFIG_SYS_SCCR (SCCR_DFBRG01)
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* RCCR - RISC Controller Configuration 13-7
|
|
*-----------------------------------------------------------------------
|
|
*/
|
|
#define CONFIG_SYS_RCCR 0
|
|
|
|
/*
|
|
* Init Memory Controller:
|
|
*
|
|
* Bank Bus Machine PortSz Device
|
|
* ---- --- ------- ------ ------
|
|
* 0 60x GPCM 32 bit FLASH
|
|
* 1 60x GPCM 32 bit FLASH (same as 0 - unused for now)
|
|
* 2 60x SDRAM 64 bit SDRAM
|
|
* 3 Local UPMC 8 bit Main Xilinx configuration
|
|
* 4 Local GPCM 32 bit Main Xilinx register mode
|
|
* 5 Local UPMB 32 bit Main Xilinx port mode
|
|
* 6 Local UPMC 8 bit Mezz Xilinx configuration
|
|
*/
|
|
|
|
/*
|
|
* Bank 0 - FLASH
|
|
*
|
|
* Quotes from the HYMOD IO Board Reference manual:
|
|
*
|
|
* "The flash memory is two Intel StrataFlash chips, each configured for
|
|
* 16 bit operation and connected to give a 32 bit wide port."
|
|
*
|
|
* "The chip select logic is configured to respond to both *CS0 and *CS1.
|
|
* Therefore the FLASH memory will be mapped to both bank 0 and bank 1.
|
|
* It is suggested that bank 0 be read-only and bank 1 be read/write. The
|
|
* FLASH will then appear as ROM during boot."
|
|
*
|
|
* Initially, we are only going to use bank 0 in read/write mode.
|
|
*/
|
|
|
|
/* 32 bit, read-write, GPCM on 60x bus */
|
|
#define CONFIG_SYS_BR0_PRELIM ((CONFIG_SYS_FLASH_BASE&BRx_BA_MSK)|\
|
|
BRx_PS_32|BRx_MS_GPCM_P|BRx_V)
|
|
/* up to 32 Mb */
|
|
#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(32)|ORxG_CSNT|ORxG_ACS_DIV2|ORxG_SCY_10_CLK)
|
|
|
|
/*
|
|
* Bank 2 - SDRAM
|
|
*
|
|
* Quotes from the HYMOD IO Board Reference manual:
|
|
*
|
|
* "The main memory is implemented using TC59SM716FTL-10 SDRAM and has a
|
|
* fixed size of 64 Mbytes. The Toshiba TC59SM716FTL-10 is a CMOS synchronous
|
|
* dynamic random access memory organised as 4 banks by 4096 rows by 512
|
|
* columns by 16 bits. Four chips provide a 64-bit port on the 60x bus."
|
|
*
|
|
* "The locations in SDRAM are accessed using multiplexed address pins to
|
|
* specify row and column. The pins also act to specify commands. The state
|
|
* of the inputs *RAS, *CAS and *WE defines the required action. The a10/AP
|
|
* pin may function as a row address or as the AUTO PRECHARGE control line,
|
|
* depending on the cycle type. The 60x bus SDRAM machine allows the MPC8260
|
|
* address lines to be configured to the required multiplexing scheme."
|
|
*/
|
|
|
|
#define CONFIG_SYS_SDRAM_SIZE 64
|
|
|
|
/* 64 bit, read-write, SDRAM on 60x bus */
|
|
#define CONFIG_SYS_BR2_PRELIM ((CONFIG_SYS_SDRAM_BASE&BRx_BA_MSK)|\
|
|
BRx_PS_64|BRx_MS_SDRAM_P|BRx_V)
|
|
/* 64 Mb, 4 int banks per dev, row start addr bit = A6, 12 row addr lines */
|
|
#define CONFIG_SYS_OR2_PRELIM (MEG_TO_AM(CONFIG_SYS_SDRAM_SIZE)|\
|
|
ORxS_BPD_4|ORxS_ROWST_PBI1_A6|ORxS_NUMR_12)
|
|
|
|
/*
|
|
* The 60x Bus SDRAM Mode Register (PDSMR) is set as follows:
|
|
*
|
|
* Page Based Interleaving, Refresh Enable, Address Multiplexing where A5
|
|
* is output on A16 pin (A6 on A17, and so on), use address pins A14-A16
|
|
* as bank select, A7 is output on SDA10 during an ACTIVATE command,
|
|
* earliest timing for ACTIVATE command after REFRESH command is 6 clocks,
|
|
* earliest timing for ACTIVATE or REFRESH command after PRECHARGE command
|
|
* is 2 clocks, earliest timing for READ/WRITE command after ACTIVATE
|
|
* command is 2 clocks, earliest timing for PRECHARGE after last data
|
|
* was read is 1 clock, earliest timing for PRECHARGE after last data
|
|
* was written is 1 clock, CAS Latency is 2.
|
|
*/
|
|
|
|
#define CONFIG_SYS_PSDMR (PSDMR_PBI|PSDMR_SDAM_A16_IS_A5|\
|
|
PSDMR_BSMA_A14_A16|PSDMR_SDA10_PBI1_A7|\
|
|
PSDMR_RFRC_6_CLK|PSDMR_PRETOACT_2W|\
|
|
PSDMR_ACTTORW_2W|PSDMR_LDOTOPRE_1C|\
|
|
PSDMR_WRC_1C|PSDMR_CL_2)
|
|
|
|
/*
|
|
* The 60x bus-assigned SDRAM Refresh Timer (PSRT) (10-31) and the Refresh
|
|
* Timers Prescale (PTP) value in the Memory Refresh Timer Prescaler Register
|
|
* (MPTPR) (10-32) must also be set up (it used to be called the Periodic Timer
|
|
* Prescaler, hence the P instead of the R). The refresh timer period is given
|
|
* by (note that there was a change in the 8260 UM Errata):
|
|
*
|
|
* TimerPeriod = (PSRT + 1) / Fmptc
|
|
*
|
|
* where Fmptc is the BusClock divided by PTP. i.e.
|
|
*
|
|
* TimerPeriod = (PSRT + 1) / (BusClock / PTP)
|
|
*
|
|
* or
|
|
*
|
|
* TImerPeriod = (PTP * (PSRT + 1)) / BusClock
|
|
*
|
|
* The requirement for the Toshiba TC59SM716FTL-10 is that there must be
|
|
* 4K refresh cycles every 64 ms. i.e. one refresh cycle every 64000/4096
|
|
* = 15.625 usecs.
|
|
*
|
|
* So PTP * (PSRT + 1) <= 15.625 * BusClock. At 66.666MHz, PSRT=31 and PTP=32
|
|
* appear to be reasonable.
|
|
*/
|
|
|
|
#ifdef DEBUG
|
|
#define CONFIG_SYS_PSRT 39
|
|
#define CONFIG_SYS_MPTPR MPTPR_PTP_DIV8
|
|
#else
|
|
#define CONFIG_SYS_PSRT 31
|
|
#define CONFIG_SYS_MPTPR MPTPR_PTP_DIV32
|
|
#endif
|
|
|
|
/*
|
|
* Banks 3,4,5 and 6 - FPGA access
|
|
*
|
|
* Quotes from the HYMOD IO Board Reference manual:
|
|
*
|
|
* "The IO Board is fitted with a Xilinx XCV300E main FPGA. Provision is made
|
|
* for configuring an optional FPGA on the mezzanine interface.
|
|
*
|
|
* Access to the FPGAs may be divided into several catagories:
|
|
*
|
|
* 1. Configuration
|
|
* 2. Register mode access
|
|
* 3. Port mode access
|
|
*
|
|
* The main FPGA is supported for modes 1, 2 and 3. The mezzanine FPGA can be
|
|
* configured only (mode 1). Consequently there are four access types.
|
|
*
|
|
* To improve interface performance and simplify software design, the four
|
|
* possible access types are separately mapped to different memory banks.
|
|
*
|
|
* All are accessed using the local bus."
|
|
*
|
|
* Device Mode Memory Bank Machine Port Size Access
|
|
*
|
|
* Main Configuration 3 UPMC 8bit R/W
|
|
* Main Register 4 GPCM 32bit R/W
|
|
* Main Port 5 UPMB 32bit R/W
|
|
* Mezzanine Configuration 6 UPMC 8bit W/O
|
|
*
|
|
* "Note that mezzanine mode 1 access is write-only."
|
|
*/
|
|
|
|
/* all the bank sizes must be a power of two, greater or equal to 32768 */
|
|
#define FPGA_MAIN_CFG_BASE (CONFIG_SYS_FPGA_BASE)
|
|
#define FPGA_MAIN_CFG_SIZE 32768
|
|
#define FPGA_MAIN_REG_BASE (FPGA_MAIN_CFG_BASE + FPGA_MAIN_CFG_SIZE)
|
|
#define FPGA_MAIN_REG_SIZE 32768
|
|
#define FPGA_MAIN_PORT_BASE (FPGA_MAIN_REG_BASE + FPGA_MAIN_REG_SIZE)
|
|
#define FPGA_MAIN_PORT_SIZE 32768
|
|
#define FPGA_MEZZ_CFG_BASE (FPGA_MAIN_PORT_BASE + FPGA_MAIN_PORT_SIZE)
|
|
#define FPGA_MEZZ_CFG_SIZE 32768
|
|
|
|
/* 8 bit, read-write, UPMC */
|
|
#define CONFIG_SYS_BR3_PRELIM (FPGA_MAIN_CFG_BASE|BRx_PS_8|BRx_MS_UPMC|BRx_V)
|
|
/* up to 32Kbyte, burst inhibit */
|
|
#define CONFIG_SYS_OR3_PRELIM (P2SZ_TO_AM(FPGA_MAIN_CFG_SIZE)|ORxU_BI)
|
|
|
|
/* 32 bit, read-write, GPCM */
|
|
#define CONFIG_SYS_BR4_PRELIM (FPGA_MAIN_REG_BASE|BRx_PS_32|BRx_MS_GPCM_L|BRx_V)
|
|
/* up to 32Kbyte */
|
|
#define CONFIG_SYS_OR4_PRELIM (P2SZ_TO_AM(FPGA_MAIN_REG_SIZE))
|
|
|
|
/* 32 bit, read-write, UPMB */
|
|
#define CONFIG_SYS_BR5_PRELIM (FPGA_MAIN_PORT_BASE|BRx_PS_32|BRx_MS_UPMB|BRx_V)
|
|
/* up to 32Kbyte */
|
|
#define CONFIG_SYS_OR5_PRELIM (P2SZ_TO_AM(FPGA_MAIN_PORT_SIZE)|ORxU_BI)
|
|
|
|
/* 8 bit, write-only, UPMC */
|
|
#define CONFIG_SYS_BR6_PRELIM (FPGA_MEZZ_CFG_BASE|BRx_PS_8|BRx_MS_UPMC|BRx_V)
|
|
/* up to 32Kbyte, burst inhibit */
|
|
#define CONFIG_SYS_OR6_PRELIM (P2SZ_TO_AM(FPGA_MEZZ_CFG_SIZE)|ORxU_BI)
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* MBMR - Machine B Mode 10-27
|
|
*-----------------------------------------------------------------------
|
|
*/
|
|
#define CONFIG_SYS_MBMR (MxMR_BSEL|MxMR_OP_NORM) /* XXX - needs more */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* MCMR - Machine C Mode 10-27
|
|
*-----------------------------------------------------------------------
|
|
*/
|
|
#define CONFIG_SYS_MCMR (MxMR_BSEL|MxMR_DSx_2_CYCL) /* XXX - needs more */
|
|
|
|
/*
|
|
* FPGA I/O Port/Bit information
|
|
*/
|
|
|
|
#define FPGA_MAIN_PROG_PORT IOPIN_PORTA
|
|
#define FPGA_MAIN_PROG_PIN 4 /* PA4 */
|
|
#define FPGA_MAIN_INIT_PORT IOPIN_PORTA
|
|
#define FPGA_MAIN_INIT_PIN 5 /* PA5 */
|
|
#define FPGA_MAIN_DONE_PORT IOPIN_PORTA
|
|
#define FPGA_MAIN_DONE_PIN 6 /* PA6 */
|
|
|
|
#define FPGA_MEZZ_PROG_PORT IOPIN_PORTA
|
|
#define FPGA_MEZZ_PROG_PIN 0 /* PA0 */
|
|
#define FPGA_MEZZ_INIT_PORT IOPIN_PORTA
|
|
#define FPGA_MEZZ_INIT_PIN 1 /* PA1 */
|
|
#define FPGA_MEZZ_DONE_PORT IOPIN_PORTA
|
|
#define FPGA_MEZZ_DONE_PIN 2 /* PA2 */
|
|
#define FPGA_MEZZ_ENABLE_PORT IOPIN_PORTA
|
|
#define FPGA_MEZZ_ENABLE_PIN 3 /* PA3 */
|
|
|
|
/*
|
|
* FPGA Interrupt configuration
|
|
*/
|
|
#define FPGA_MAIN_IRQ SIU_INT_IRQ2
|
|
|
|
/*
|
|
* JFFS2 partitions
|
|
*
|
|
*/
|
|
/* No command line, one static partition, whole device */
|
|
#undef CONFIG_CMD_MTDPARTS
|
|
#define CONFIG_JFFS2_DEV "nor0"
|
|
#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
|
|
#define CONFIG_JFFS2_PART_OFFSET 0x00000000
|
|
|
|
/* mtdparts command line support */
|
|
/*
|
|
#define CONFIG_CMD_MTDPARTS
|
|
#define MTDIDS_DEFAULT ""
|
|
#define MTDPARTS_DEFAULT ""
|
|
*/
|
|
|
|
#endif /* __CONFIG_H */
|